Da Double Arm Bracket Tech Sheet

Transcript

DA - Double Arm Bracket Technical Sheet FUNCTION DESIGN HIGHLIGHTS • Solid steel construction holds display securely • Bi-directional swivel up to over 90 degrees in either direction • Custom cut arms to any length up to 500mm [19.7"] per arm • Brushed aluminium caps for superb aesthetic finish An manual wall bracket that can move an LCD or Plasma screen to almost any desired viewing poition. SUITABILITY All flat screen with rear mounting holes will be suitable for the DA bracket. Check the screen size to make sure the screen covers the bracket in the IN / CLOSED position OPTIONS • Any RAL colour available • Bang & Olufsen / Loewe mount option ISSUE 002 SHEET 1 of 5 SPECIFYING Check wall makeup to decide on fixings to be used. Check screen details for mounting possibilities. Check angles for viewing. WARNING IMPORTANT It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 DA - Double Arm Bracket Movement Examples ISSUE 002 SHEET 2 of 5 Technical Sheet IN Position The DA Bracket can move into many different positions to create the most suitable viewing angle. The screen can parallel track out to the maximum extension and then rotate over 90 in either direction. Other custom positions can be formed and with a smooth positive movement the bracket will hold the screen securely in place. Possible Viewing Position www.futureautomation.co.uk tel: +44 (0) 1438 833 577 Max OUT Position fax: +44 (0) 1438 833 565 Possible Viewing Position DA - Double Arm Bracket ISSUE 002 SHEET 3 of 5 Technical Sheet Wall Mounting The DA wall bracket acn be used as a solution for many installations. Below are some examples. Wall Example 1 Wall Example 2 To store the screen in a deep recess and still be able to move the screen out and around to a required viewing angle. To store the screen facing one direction and still be able to move the screen up to 180 around a corner to another viewing area. www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 Wall Example 3 To fix the screen to one wall of a room corner installation. DA - Double Arm Bracket Technical Sheet Arm length + 25mm [1"] Bracket Dimensions Make sure that the bracket doesn't over hang the screen in the closed position. Check the width of the screen against the bracket arm lengths. Half Screen Width 400mm [15.7"] Standard Arm Length 105mm [4.1"] Bracket Depth www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 ISSUE 002 SHEET 4 of 5 DA - Double Arm Bracket ISSUE 002 SHEET 5 of 5 Technical Sheet 190mm [7.5"] 90mm [3.5"] www.futureautomation.co.uk tel: +44 (0) 1438 833 577 fax: +44 (0) 1438 833 565 105mm [4.1"] 10mm [0.4"] TYP 220mm [8.7"] 15mm [0.6"] 120mm [4.7"] 105mm [4.1"] 105mm [4.1"] 430mm [16.9"] 670mm [26.4"] 105mm [4.1"] 330mm [13"] 570mm [22.4"] 10mm [0.4"] TYP 15mm [0.6"] 120mm [4.7"] 15mm [0.6"] 105mm [4.1"] 230mm [9.1"] 470mm [18.5"] 10mm [0.4"] TYP Size 50/60" 15mm [0.6"] Size 32" Size 42" 105mm [4.1"] 90mm [3.5"] 90mm [3.5"] 15mm [0.6"] The DA Bracket comes in 4 standard sizes32", 42", 50" and 60". 15mm [0.6"] Wall Mounting Dimensions