Preview only show first 10 pages with watermark. For full document please download

инструкция к монтажной коробке Da-jb2000 для цилиндрических Ip-видеокамер серии Dc

   EMBED

Share

Transcript

DA-JB2000 INSTALLATION MANUAL This manual is intended for users of the DA-JB2000 wall mounting bracket. It includes instructions for mounting the DA-JB2000 wall mounting bracket to a wall. • This bracket is intended to be used with DC-T series model of camera. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the wall. If the wall is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes. Mounting Mount the bracket to the wall as follows: 1 Insert cables from external devices, network and power adapter to the sponge and bracket. 2 Mount the sponge to the wall and then bracket to the sponge by using the anchors and screws. Wall Sponge Bracket Rubber Screw #8X25, 4EA Connect your camera to the bracket as follows: 3 Attach the rubber onto bracket and screw the camera body onto bracket. Bracket Rubber Make sure that the rubber is attached onto bracket. Camera Body Dimensions Unit: mm (inch) 70 (2.76) 4-TAP M5, Dp7 4 - Ø 9.8 (0.39) 70 (2.76) 32 (1.26) Ø10 90 (3.54) 70 (2.76) 64 (2.52) 32 (1.26) 64 (2.52) 70 (2.76) 90 (3.54) 32 (1.26) Ø 41 (1.61) Ø 52.5 (2.07) R184.5 4 - Ø 6.3 (0.25) R184.5 3 (0.12) 2 (0.08) 24.5 (0.96) 22.5 (0.89) 18.6 (0.73) 22 (0.87) 35 (1.38) PT 1/2" 43 (1.69) 44 (1.73) 3 (0.12) IDIS Co., Ltd. For more information, please visit www.idisglobal.com Ver.1.0