Preview only show first 10 pages with watermark. For full document please download

инструкция к адаптеру для установки на угол Da-rm2000 для моделей: Dc-wm2000, Dc-jb2000, Ip-видеокамер Dc

   EMBED

Share

Transcript

DA-RM2000 INSTALLATION MANUAL This manual is intended for users of the DA-RM2000 corner mounting bracket. It includes instructions for mounting the DA-RM2000 corner mounting bracket to a corner. • This bracket is intended to be used with DC-D1xxx, DC-D2233 or DC-T series model of cameras. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the corner. If the corner is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes. Mounting Mount the bracket to the corner as follows: 1 Mount bracket 1 to the corner by using the anchors and screws. Bracket 1 Tapping Screw #8x25 4EA Connect your camera (DC-D1xxx or DC-D2233 series) to the bracket as follows: 2 Mount bracket 2 (DA-WM2000 model) to bracket 1 by using the screws. The bracket 2 is sold separately. Bracket 1 Bracket 2 (DA-WM2000) Hexagon Socket Screw M5X30, 4EA Connect your camera (DC-T series) to the bracket as follows: 3 Mount the camera body onto bracket 1 by using the screws. 4 Turn on power. Bracket 1 Camera Body Dimensions Unit: mm (inch) 70 (2.76) 64 (2.52) 40 (1.57) 36 (1.42) 110 (4.33) 40 (1.57) 5 (0.20) 22 15 (0.59) (0.87) 83 (3.27) 70 (2.76) 32 (1.26) 4-TAP M4, TRUE Ø 40 (1.57) 12-TAP M5,TRUE Ø 57 (2.24) 165.73 (6.52) 100 (3.94) R2 36 (1.42) 110 (4.33) 22 7 32.86 (1.29) 5 22 15 (0.59) (0.87) 22 5 ° 30 (1.18) 135 5 (0.02) 7 (0.28) 55 (2.17) 7 15 7 21.5 9 (0.35) 110 (4.33) Ø 84 (3.31) 22 (0.87) 1 4-TAP M5,TRUE 90° 165.71 (6.52) 2 (0.08) 21.5 (0.85) IDIS Co., Ltd. For more information, please visit www.idisglobal.com Ver.1.0