Preview only show first 10 pages with watermark. For full document please download

инструкция к кронштейну штативу Da-sm1100 для корпусных Ip-видеокамер серии Dc-b и Dc

   EMBED

Share

Transcript

DA-SM1100 INSTALLATION MANUAL This manual is intended for users of the DA-SM1100 stand mounting bracket. It includes instructions for mounting the DA-SM1100 stand mounting bracket to a wall or ceiling. • This bracket is intended to be used with DC-B series model of camera. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the wall or ceiling. If the wall or ceiling is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes. Mounting Mount the bracket to the wall or ceiling as follows: 1 Insert cables from external devices, network and power adapter through the hole in bracket. 2 Mount bracket to the wall or ceiling by using the screws (not provided). Bracket Connect your camera to the bracket as follows: 3 Mount plate, which is enclosed with the camera, onto the bottom or top of the camera by using the screws. Plate 4 Loose the knob by turning it clockwise. Knob 5 Mount the camera onto bracket by turning the mounting screw. 6 7 Adjust the camera angle. Turn on power. Mounting Screw Dimensions z °) x 72 y 12 0° (4. 80 (3.15) ± 0.1 Unit: mm (inch) 57 (2.24) IDIS Co., Ltd. For more information, please visit www.idisglobal.com Ver.1.0