Preview only show first 10 pages with watermark. For full document please download

инструкция к настенному кронштейну Da-wm1200 для купольных Ip-видеокамер серии Dc

   EMBED

Share

Transcript

DA-WM1200 INSTALLATION MANUAL This manual is intended for users of the DA-WM1200 wall mounting bracket. It includes instructions for mounting the DA-WM1200 wall mounting bracket to a wall. • This bracket is intended to be used with DC-D series model of camera. Do not use it with other models of cameras. • This installation should be performed by a qualified service personnel in conformance to all local codes. • You may need to reinforce the wall. If the wall is not strong enough to support the camera, the camera may fall. • Do not use this product for other purposes. Mounting Mount the bracket to the wall as follows: 1 Attach rubber 1 to bracket 1. 2 Insert cables from external devices, network and power adapter through the hole in the rear of bracket 1. 3 Mount bracket 1 to the wall by using the screws. Bracket 1 Rubber 1 Bracket 1 Cable Rubber 1 4 5 Attach rubber 2 onto bracket 2. Bracket 1 Screw bracket 2 to bracket 1. Rubber 2 Bracket 2 6 Connect hexagon screw supports to the screw holes marked as 4 on bracket 2. 7 Screw the plate to the hexagon screw supports. Bracket 2 Screw Support Plate Connect your camera to the bracket as follows: 8 Screw the camera bottom cover onto the plate. 9 Connect the camera dome cover onto the camera bottom cover. < Plastic Dome Camera > 10 Turn on power. < Vandal Dome Camera > Plate Plate Camera Bottom Cover Camera Bottom Cover Camera Dome Cover Camera Dome Cover Dimensions Unit: mm (inch) 90.0 (3.54) IDIS Co., Ltd. For more information, please visit www.idisglobal.com 3- 5.0 (0.20) HOLE 56.0 (2.20) 105.0 (4.13) 123.5 (4.86) (Combined Hole Position) 54.0 (2.13) 237.5 (9.35) Ver.1.0