Transcript
Data Sheet 4523440 Product: El-number: Mat.no: EAN: Packing: Color:
ESH Plus 316 dim kit RF PH 4523440 EKO06923 7020160692313 1
Product description:
ELKO AS E-mail: Internet: Bank: Org.no.:
[email protected] www.elko.no 6219.05.15880 NO 911 382 563 MVA
ELKO Front office Sandstuveien 68, NO-0680 Oslo P.O.Box 6598 Etterstad, NO-0607 Oslo Tel.: +47 67 80 73 00 Fax: +47 67 80 73 01
ELKO Plant Sporpind Industriområde, NO-3340 Åmot Tel.: +47 32 78 91 00 Fax: +47 32 78 91 01
ESH 316GLED RF and endevender (remote control) delivered as a factoryprogrammed kit. ESH 316 Endevender (remote control) and 316 GLED RF is programmed as a Master-Slave combination. One 316GLED RF dimmer can be controlled by up to 3 endevendere. (remote controls). It is not possible to use the ELKO Smart Home app in this combination. If control by ESH App is wanted, install the ESH app and the ELKO Smart Home Gateway. The App and Gateway can easily be installed at all times, it must not be installed at first. The remote control and other ESH devices are communicating via the Zigbee protocol.
ESH 316GLED RF dimmer is a part of the ELKO Smart Home system. Dimmers and other components are communication to the ELKO Gateway internally with the Zigbee protocol. The ESH components are controlled by the Gateway, wich is controlled by the ESH App on mobile devices. 316GLED RF is designed to operate even if the wireless network fails, the dimmer will then function in Stand alone mode, with local fysical operation. It is also possible to control the dimmer with a remote controlled switch. This can be programmed with or without a Gateway. The Gateway must be installed and programmed if you want to control your home with an app. 316 GLED dimmer is developed for LED and low loads. It also works with ohmic loads, electronic trafos and 230V Halogen loads. ELKO Plus version is delivered with an integrated light guide for pilot lamp around the dimmer knob. The light can be turned on/off in the menu. The dimmer must be connected to both L and N, and can be used as 1 pole aswell as 2 pole. Choose between GLI or GLE mode (leading- and trailing edge dimming), makes the dimmer extremely flexible. The startlevel can be adjusted so the LED lamps starts, minimum- and maximum brightness level can easily be adjusted. 316GLED is very slim and is only 24mm into the box, it will fit in surface boxes and in every ELKO combination plates. ESH 316 Endevender (remote control) and 316 GLED RF can be programmed as a Master-Slave combination. One 316GLED RF dimmer can be controlled by up to 3 endevendere. (remote controls). It is not possible to use the ELKO Smart Home app in this combination. If control by ESH App is wanted, install the ESH app and the ELKO Smart Home Gateway. The App and Gateway can easily be installed at all times, it must not be installed at first. The remote control and other ESH devices are communicating via the Zigbee protocol. ESH endevender does not have any depth backwards, so it can be installed directly on the wall with duotape. It fits into all of the ELKO combinationplates. The remote control is powered by two CR2032 batteries. If you want to connect it to electricity, use the mini trafo for backframes with light, el.no: 66 300 71
Technical specifications:
ELKO AS E-mail: Internet: Bank: Org.no.:
[email protected] www.elko.no 6219.05.15880 NO 911 382 563 MVA
ELKO Front office Sandstuveien 68, NO-0680 Oslo P.O.Box 6598 Etterstad, NO-0607 Oslo Tel.: +47 67 80 73 00 Fax: +47 67 80 73 01
ELKO Plant Sporpind Industriområde, NO-3340 Åmot Tel.: +47 32 78 91 00 Fax: +47 32 78 91 01
TECHNICAL INFO ENDEVENDER: Color: Polarwhite Batteries: 2 pcs CR-2032 Compatible trafo el.nr: 66 300 71 Up to 3 remotes can control one 316GLED RF dimmer Depth in box: None Mounting: Flush mounted box, surface housing or directly on the wall. Fits in all of the ELKO Combination plates. TECHNICAL INFO 316GLED RF: Voltage: 230 V/50-60 Hz. Choose between GLI or GLE mode (leading or trailing edge dimming) (GLE factorysetting) Ohmic load: 1-316W Halogen: 1-300W Electronic trafo: 1-316VA LED: See ELKO led table @ www.elko.no LED: If your LED lamp is not listed from ELKO, max LED load is 150W. Warning! Check temperature on metalplate when on and different levels. Electronic heat safety: 75°C , dimmer can be switched on again on 65°C. Electronic short circuit fuse Mechanical overheating safety on 145°C. (Can not be reset) Operation: Push on/off - Turn for adjustements 1- or 2-pole. 2 pole when off Depth: 24mm Color: Polarwhite IP20 Programming 1 push - 1 blink: Adjustment of minimum brightness level 2 pushes - 2 blinks: Adjustment of maximum brightness level 3 pushes - 3 blinks: Adjustment of startlevel. Turn on/off pilotlight around the dimmerknob. (ELKO Plus version) The dimmer must be turned on. Long push in app. 5 seconds - leddiode blinks once - short push - lightdiode blinks twice - turn the dimmerknob to the right (light on) or turn left (light off) Save: Wait until it stops blinking in the leddiode.
Size
Wiring diagram
ELKO AS E-mail: Internet: Bank: Org.no.:
[email protected] www.elko.no 6219.05.15880 NO 911 382 563 MVA
ELKO Front office Sandstuveien 68, NO-0680 Oslo P.O.Box 6598 Etterstad, NO-0607 Oslo Tel.: +47 67 80 73 00 Fax: +47 67 80 73 01
ELKO Plant Sporpind Industriområde, NO-3340 Åmot Tel.: +47 32 78 91 00 Fax: +47 32 78 91 01
