Transcript
FITTINGS FOR 1/4000 / G4OOO STEEL SURFACE RACEWAY Ivory & Gray Finish
a011/15RI
2" 151 mm! RADIUS CORNER INSERT
A radiused insert for the V/G4011 flat elbow and the V/G4015 undivided tee that provides a bend radius of 2" [51mm] for Category 5e or optical fiber cable installations. The insert is ideal for new and retrofit applications whether the cable installation is lay-in or pullthrough. See radius chart page A3*8.
V4015D/G4015D
Two required lor use with 4015.
DIVIDED TEE
For branches at right angles. For divided raceway only. Join to raceway run with G4001 couplings (not furnished).
10"
[254mm]
12" [305mm]
1/4015FO / G4015FO FIBERREADY 2" 151mm] RADIUS FULL CAPACITY TEE FITTING <®.< A full capacity undivided tee fitting that provides a 2" [51mm] cable bend radius for fiber optic/ Cat 5e installations. Ideal for new installations whether the cable is lay-in or pull-through.
1/4015DFO/G4015DFO
2" [51mm] RADIUS FIBERREADY DIVIDED TEE ®«
A full capacity divided tee fitting that provides a 2" [51mm] cable bend radius for fiber optic / Cat 5e installations. Ideal for new installations whether the cable is lay-in or pull-through. —13/4" [44mm]
A3-12
FUTURES B BENEFITS TWO-PIECE STEEL SURFACE RACEWAY 1/4000 / G4000 •
• • • • • •
FiberReady 2" 151 mm! Fiber Optic / Category Se Radius fittings. These corner and tee fittings are UL and cUL verified for a 2" 1 5 1 m m ] bend radius and exceed the recommendations of TIA/EIA 569-A. Available as full capacity fittings or inserts to be used for existing installations. Steel raceway. Provides superior strength for any dry location installation. Large cross section area. Provides ample space for large wiring requirements. Dividable raceway base. Snap-in divider creates two compartment raceway; bringing power and data/communications to one location. Complete line of fittings. Provides complete wiring solution and allows for interconnection between raceway systems. Gray baked enamel and Ivory ScuffCoat finish. Durable Ivory Scuffcoat finish makes a scratch resistant surface. Feeder or header system. Ideal for overhead, open spaces and under raised floor applications.
•
Pre-ciit covers. For mounting devices on various centers without cutting the covers. Use with 4046, 4048, 4007 and 4049 Series device plates. • 4049 Nonmetallic device plates. Overlapping design offers an aesthetically pleasing way to cover seams. High impact gray or ivory plastic plate accommodates many device configurations. CODE REFERENCE • Base and cover cutters. Manually operated cutters are lightweight and portable. Cutters offer labor savings for any size job and maintain a factory clean and square end cut. UL Listed Raceway: File E4376 Guide RJBT
Fittings: File 41751
Guide RJPR Meets Article 352A of NEC.
CSA Certified Raceway: File LR 350
Fittings: 350 and
48952 Meets Section 12-1600 of CEC.
A3-2
• Interlink Activate1" OTP, STP, coaxial, audio, video and fiber optic inserts. A wide variety of media interface inserts to ensure a reliable, cost-effective solution for today's most demanding communication system designs. •
Available prewired. Manufactured to specified job site lengths, raceway comes completely prewired, ready to install. Jobs can be packaged by area, floor, or building and shipped per job site requirements. • Simple prewired ordering. Provide us with marked-up electrical drawings with lengths and electrical/communications specifications and shipments can begin within three to four weeks or less for most jobs. • 015 and ADA Compliant. Raceway and fittings meet UL5 specifications and can be installed in conformance with ADA requirements. • WallSource" Box compatible. Use box for easy backfeeding.
V6OOO / GBOOO TWO-PIECE STEEL SURFACE RACEWAY Ivory S Gray Finish
UBOOOB-10 / G6000B-10* BASE .060" [1.5mm] galvanized steel. Base has two 9/32" [7.1mm] dia. trade size KOs 1 1/4" [32mm] from each end and on centers of approximately 18" [457mm] throughout. Packed 20 ft. [6.1m] per carton. G6000B-5 packed four 5 ft. [1.5m] lengths; G6000B-10 packed two 1 0 ft. [3m] lengths.
U6000C / G6000C
3 9/16"
[90mm] 43/4'
[121mm]
COVER* @ ®
.040" [1.0mm] galvanized steel. Packed four 5 ft. [15.25m] lengths per carton. 4000C Cover is compatible with 6000 Base.
GBOOODA-
DIVIDER ®
.040" [1.0mm] galvanized steel. One side painted buff primer to provide identification of compartments. Packed four 5 ft. [1.5m] lengths per carton.
660B***
3 1/4"
[83mm]
RACEWAY BASE CUTTER
Portable cutter for 6000 raceway base. Tool steel construction for clean and easy square end cut. Total manual operation.
660BDK REPLACEMENT BLADE KIT Replacement blades and die set for 660B Cutter.
G40C***
COVER CUTTER
Portable cutter for 4000 and 6000 Cover. Tool steel construction for clean and square end cut. Total manual operation.
640CDK REPLACEMENT BLADE KIT Replacement blade and die set for 640C Cutter.
* Use V prefix on Catalog No. for ivory finish and G prefix on Catalog No. for gray finish. 4000C and 6000C Covers are compatible with 40000 and £0000 Base. " G6001DA Divider Clips are required to hold divider in place. * * * Cutters not suitable for use with S4000 Series raceway.
A3 • 45
