Transcript
Inside Connect 2-Port Antenna Frequency Range Dual Polarization HPBW hor.
Y1 1695–2690 X 75°
2-Port Inside Connect Antenna 1695–2690 75° 8dBi Type No.
80020100
Use Case
integration into enclosure (e. g. street furniture)
Highband
Y1
Frequency range Polarization Gain Horizontal Pattern: Half-power beam width Front-to-back ratio, copolar (180°±30°) Cross polar ratio 0° Cross polar ratio over sector ±60° Vertical Pattern: Half-power beam width Impedance VSWR Isolation, between ports Intermodulation IM3 Max. power per input Max. power per antenna
MHz ° dBi
1695 – 2690 1695 – 2690 +45, –45 max. 8
°
75 (±5)
dB
typ. > 25
dB
typ. > 24
dB
> 10
°
75 (±5)
Ω
50 < 1.9 > 25 < –150 (2 x 43 dBm carrier) 40 (at 50 °C ambient temperature) 40 (at 50 °C ambient temperature)
dB dBc W W
Material:
Reflector: Aluminum. Radome: PC, colour: White.
936.5359/d
Subject to alteration.
Mechanical specifications
Y1
Correlation Table Frequency range
Array
Connector
1695–2690 MHz
Y1
1–2
Input 2 x 4.3-10 female Connector position back Operating temperature °C –20 … 70 range Fire load kWh 1.4 Fire protection UL 94-V2 Height / width / depth mm 121.5 / 124 / 74 incl. modular mounting inches 4.8 / 4.9 / 2.9 parts Category of see accessory parts and mounting hardware mounting options Weight kg 0.4 lb 0.9 Packing size mm 155 x 155 x 80 inches 6.1 x 6.1 x 3.1 Protection class IP 56 Scope of supply Antenna and mounting parts: 1x 0107670, 2x 0107672 Mounting interface Screw M6, max. screw head height: 6 mm | 0.24 inches, max. screw head diameter: 13.5 mm | 0.53 inches Further mounting parts (please order separately) Type No.
Description
85010205
Package with mounting parts
80020100 Page 1 of 4 www.kathrein.com KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
Modular Antenna Mounting Options and Modular Mounting Parts Antenna Mounting Options (Basic) Mounting option
Configuration Required Antenna symbol mounting parts
Single element use
1x 0107670
Additional notes Included in a single module package
2x 0107672 Y1
Stacked (high isolation)
5x 0107670
Example: 3 Elements stacked:
Y3
2x 0107669
Y2
Distance between centers of dipoles: 132.00 mm | 5.197 inches Isolation between all ports: > 25 dB
Y1
2x 0107672
Side by side (high isolation)
7x 0107670 3x 0107669 Example: 4 Elements side by side: Distance between centers of dipoles: 3x 0107673 2x 0107672 132.00 mm | 5.197 inches Y1
Two elements back to back
Y2
Y3
Isolation between all ports: > 25 dB
Y4
2x 0107671
One element has to be turned 180° for connecting! Angular connectors are required!
5x 0107671
Angular connectors are required! Isolation between all ports: > 25 dB
Y4 Y2
2x 0107669 Y3 Y1
Page 2 of 4 80020100 www.kathrein.com KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
936.5359/d
Stacked / side by side back to back (high isolation)
Subject to alteration.
Y1 Y2
Modular Antenna Mounting Options and Modular Mounting Parts
Configuration Required Antenna symbol mounting parts
Mounting option Side by side / stacked direct (high order MIMO)
Y2
Y1
Additional notes
5x 0107670
Example: Four elements stacked / side by side Low distance for MIMO
2x 0107672
Distance between centers of dipoles: 108.75 mm | 4.281 inches
Y4
Y3
Isolation between all ports: > 22 dB
Side by side / stacked direct (high order MIMO) back to back
6x 0107671
Y6 Y2
Y8 Y1 Y4
Example: Eight elements stacked / side by side back to back Low distance for MIMO Angular connectors are required!
Y5 Y1
Y7 Y3
Isolation between all ports: > 22 dB
936.5359/d
Subject to alteration.
Back to back mounting – Dimensions
29.9 | 1.177 51.5 | 2.028
51 | 2.008
51.5 | 2.028
All dimensions in mm | inches
80020100 Page 3 of 4 www.kathrein.com KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
Modular Antenna Mounting Options and Modular Mounting Parts
Modular mounting part
Part number
Function
0107671
Back to back installation, mounting and stabilization interface
0107670
Side by side / Stacked installation, mounting and stabilization interface
0107669
High isolation spacer
0107673
Additional stabilization element
0107672
Additional stabilization element
936.5359/d
Subject to alteration.
For additional information about the modular mounting parts, please see data sheet for accessories 85010205.
Page 4 of 4 80020100
Any previous data sheet issues have now become invalid.
www.kathrein.com KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
General Information about Panel Antennas Environmental conditions:
Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: –55 °C – High temperature (dry): +60 °C For antennas equipped with FlexRET: The electrical downtilt adjusting is designed to operate under the environmental conditions as described in the valid data sheet of the FlexRET. Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions.
Environmental tests:
Kathrein antennas fulfil the stated specifications after completion of the environmental tests as defined in ETS 300 019-2-4. The homogenous d esign of Kathrein’s antenna families uses identical modules and materials. Extensive tests have been performed on typical samples and modules. The vibration test has been adapted relating to frequency and acceleration to the conditions of mast mounted antennas.
Please note:
As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4. Wind loads are calculated according to DIN 1055-4. The antennas may be used at locations where the anticipated peak wind velocity or gust wind speed lies within the maximum wind speed listed in the data sheet. We warrant the mechanical safety and electrical functionality under such conditions. The wind speeds are defined in accordance with the DIN, EN or TIA standards. This warranty makes allowance for the partial safety factors specified in those standards. Extraordinary operating conditions, such as heavy icing or exceptional d ynamic stress (e.g. strain caused by oscillating support structures), may result in the b reakage of an antenna or even cause it to fall to the ground. These facts must be c onsidered during the site planning process.
936.4694/d
Subject to alteration.
The details given in our data sheets have to be f ollowed carefully when installing the antennas and a ccessories. Site planning and installation must be carried out by qualified and experienced staff. All relevant national safety regulations must be upheld and respected. Incorrect site planning, faulty installation, as well as interfering surroundings on site, may lead to deviations in the electrical parameters compared to those specified in the respective data sheets. The connectors on this product are only suitable for connecting to the compatible counterpart. Please ensure that the connected cable has been fitted with a connector of the same standard, otherwise damage may occur. The tilt values will be set to any arbitrary value in the given tilt range. These values are independent from the frequency band or antenna type and can vary between antennas and bands. EU-RED
Hereby, Kathrein Werke KG declares that the radio equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kathrein.com
Our quality assurance system and our environmental management system apply to the entire company and are certified by TÜV according to EN ISO 9001 and EN ISO 14001.
RoHS
Any previous data sheet issues have now become invalid.
Our products are compliant to the EU Directive RoHS as well as to other environmentally relevant regulations (e.g. REACH).
Page 1 of 1 www.kathrein.com KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
