Preview only show first 10 pages with watermark. For full document please download

Data Sheet: Fist-gpst-12

   EMBED


Share

Transcript

FIST-GPST-12 19-inch GPST 12 Tray with Pre-Connectorized Intrafacility Cables (IFC 12) The GPST 12 tray is a 19-inch patch/splice tray assembly for the FIST fiber management system in a rack environment. Features The pre-loaded trays are delivered in sets of two trays, loaded with one or two pre-installed intrafacility cables containing 12 buffered 900µm fibers each. • Easy and full access in a horizontal plane to both sides of the connection The intrafacility cables allow an easy connection between optical distribution frames or between an optical distibution frame and active equipment and the cable vault. • Fits the 1-inch CommScope shelf and rack systems • Fast, easy installation • Guaranteed managed fiber routing following CommScope FIST methodology • Better handling compared to separate pigtail cables • Available with a range of connector types • Guaranteed quality level according to IEC standards • LSZH cable jacket 1 For more information, visit commscope.com FIST-GPST-12 19-inch GPST 12 Tray with Pre-Connectorized Intrafacility Cables (IFC 12) Dimensions and Capacity Dimensions Description H (mm) W (mm) D (mm) Max. Capacity standard connectors SFF Connectors 18 355 190 12 24 FIST-GPST-12 Outer jacket (LSZH) Barrier Aramid strength members Semi-tight buffered fibers Outside diameter: 7 mm Ordering Information for 1 set of 2 GPST 19” trays with IFC EIA/TIA 598 color-coding FIST - GPST - XX - XX - XXX 2 Tray Orientation Cable Length in meter* AI Cables on right side of tray 001...010 m in increments of 1m IA Cables on left side of tray 010...030 m in increments of 5m 030...999 m in increments of 10m Connector Type (Grade according to IEC 61755-1) Standard (grade C) Superior (grade B) SC/UPC S1 SF SC/APC 8º S2 SG SC/APC 9º S3 — LC/UPC L1 LF LC/APC L2 LG FC/UPC F1 — FC/APC F2 — E2000/APC — E9 *  Length between tray and open end    of the cable Set of 2 trays Tray 1 of 2 Connector array Tray 2 of 2 Connector array Each set contains one tray with connectors set to the right and one tray with connector array set­­to the left. For more technical options and order quantity information, please consult the product ordering guide or your local sales representative. www.commscope.com Visit our website or contact your local CommScope representative for more information. © 2016 CommScope, Inc. All rights reserved. FIST and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. PS-322635-EU (01/16)