Transcript
Ground Support Headset Specifications Model No. H133/AIC / P/N 12135G-03 Headset-Mic, Shield, OTH For Noise Levels to 140dB
Earphone Type:
Dynamic
Ear Seals:
Foam filled
Earphone Impedance:
19 ohm each; wired in parallel
Microphone:
M-101 Dynamic
Earphone Sensitivity:
90 dB SPL on flat plate coupler, re 1mW input @ 1KHz
Mic Impedance:
5 ohms +/- 20%
Earphone Frequency Response:
100 – 5,500 Hz
Mic Sensitivity:
Non-amplified = .07 – 14mV @ 1khz for 103dB SPL input or Amplified = 400mV +/6dB into 150 ohm load @ 1kHz for 114dB SPL input
Boom Type:
Mic Shield Assembly
Mic Freq Response:
300 – 3000Hz
Headpad:
Soft comfort foam (ribbed)
Comm Cord:
30 inch straight
Hardware:
Chrome-platted, corrosion-resitant
Plug Type:
U-93A/U
360 Franklin Street, Box 15054, Worcester, MA 016150054 Tel: 8002986235 Email:
[email protected] Web site: www.davidclark.com c
2016 David Clark Company Incorporated
Technical data subject to change without prior notice. Current data available at www.davidclark.com
Fax: 5087535827 Made in USA (116)
