Transcript
DATALynx Storage Onboard RAID System
DATALynx Storage Highlights
4x 2,5” HDD/SSD slots
Integrated RAID controller
Connection via USB3.0 (Type B) or eSATA
Joins 4 SATA drives to one hardware RAID array
Supports SATA drives (1,5/3/6 Gbps)
RAID modes 0,1,3,5,10, JBOD, BigDrive, single drives
Support for Windows XP, 2003, 2008, Vista 7, 8; Linux Kernel 2.4 and higher
Requires USB3.0 or eSATA II controller, if possible with port multiplier support in the host system
Power supply for onboard applications
o
6,5-32 V input
o
Engine cranking safe
o
Clamp 15/30
Illustration 1: Schematic illustration of DATALynx Storage 2.5 with integrated RAID controller
More bandwidth with SFF-8088 connector versions with the RAID controller of the host system (up to 830 MB/s, depends on used disks, configuration, host system and software)
Modular RAID system for onboard use DATALynx Storage is the perfect scalable solution for reliant and high performance recording of data in automotive measurement systems. It was designed for the special requirements in automotive measurement systems. The robust system was explicitly designed for test drives. The high performant RAID configuration enables a very high data throughput or mirroring to multible disks. Due to the wide range input and the engine cranking safe power supply the system is safe against short term fluctuations and drops of the voltage. Thus the important measurement data from the test drives is protected at a maximum. In perfect match with the measurement PC DATALynx the DATALynx Storage device offers a complete solution for the measurement tasks in the vehicle.
Alle Daten bei 25°C Umgebungstemperatur, falls nicht anders angegeben. / All data at nominal input and 25° C ambient temperature, if not marked otherwise. Alle Daten dienen nur Informationszwecken und sind nicht als zugesicherte Eigenschaften aufzufassen. / All data for information purposes only, no assured characteristics. Technische Änderungen ohne vorherige Ankündigung sowie Irrtümer vorbehalten. / Technical modifications without notice and errors reserved. Belastung mit Extremwerten über einen längeren Zeitraum kann die Zuverlässigkeit beeinflussen. / Strain with extreme values for a longer period may affect the reliability. Alle Trademarks und Logos sind Eigentum der jeweiligen Unternehmen. / All trademarks and logos are property of the concerning companies. In case of doubts the German version of the document is binding. © b-plus GmbH ▪ Mai-14 ▪ Version: 5.0 b-plus GmbH ▪ Ulrichsberger Straße 17 ▪ D-94469 Deggendorf ▪ Tel. +49 991 270302-0 ▪ Fax -99 ▪
[email protected] ▪ www.b-plus.com
DATALynx Storage Onboard RAID System Technical information
RAID controller version
HDD Bay 4x 2,5” SATA HDD RAID backplane system HDD-carrier is mounted with vibration dampers Housing Robust steel housing All connectors are front side accessible Power supply 6,5 – 32V via clamping block or desktop power supply Clamp 15/30 circuit Engine cranking safe Temperature range 0 – 50°C ambient temperature (operating) Dimensions Width: 25,2 cm Height: 5,5 cm Depth: 21,2cm
Integrated RAID controller Connection via USB3.0 (USB3.0 Type B) or eSATA cable Transmission rate to the host system USB 3.0 5Gbps, USB 2.0 downward compatible, or eSATA 3Gbps Chipset Jmicron SATA JMB393 port multiplier RAID controller and Jmicron JMB339 USB 3.0 bridge HMI area 4 HDD LEDs DIP-switches for the setup of the RAID controller
Illustration 2: eSATA and USB3.0 version with integrated RAID controller
Illustration 3: SFF-8088 version for the use of the RAID controller in the host system
SFF-8088 version Higher data rates with SFF-8088 versions The DATALynx Storage versions with SFF-8088 connector offers the transfer of 4 SATA ports directly to the host system to use the host internal RAID controller. This enables higher data rates up to 850 MB/s.
Order information Name
Order no.
Description
DATALynx Storage 25R
B16001-DST-001-0001
RAID System with controller without HDD/SSD
DATALynx Storage 25SF
B16001-DST-001-0002
RAID System without controller but with 4xSATA via SFF-8088 connector without HDD/SSD
DATALynx Storage 25R8TCH
B16001-DST-001-0101
RAID system with controller and 4x 2TB HDD
DATALynx Storage 25R4TCS
B16001-DST-001-0201
RAID system with controller and 4x 1TB SSD
Power supply XXXX
B16001-DST-002-0001
12V DC / 30W power supply set
USB3.0 Cable 1M
B16001-DST-002-0002
USB cable 1m
eSATA Kabel 1M
B16001-DST-002-0003
eSATA cable 1m
SFF-8088 Kabel 1M
B16001-DST-002-0004
SFF-8088 cable 1m
Alle Daten bei 25°C Umgebungstemperatur, falls nicht anders angegeben. / All data at nominal input and 25° C ambient temperature, if not marked otherwise. Alle Daten dienen nur Informationszwecken und sind nicht als zugesicherte Eigenschaften aufzufassen. / All data for information purposes only, no assured characteristics. Technische Änderungen ohne vorherige Ankündigung sowie Irrtümer vorbehalten. / Technical modifications without notice and errors reserved. Belastung mit Extremwerten über einen längeren Zeitraum kann die Zuverlässigkeit beeinflussen. / Strain with extreme values for a longer period may affect the reliability. Alle Trademarks und Logos sind Eigentum der jeweiligen Unternehmen. / All trademarks and logos are property of the concerning companies. In case of doubts the German version of the document is binding. © b-plus GmbH ▪ Mai-14 ▪ Version: 5.0 b-plus GmbH ▪ Ulrichsberger Straße 17 ▪ D-94469 Deggendorf ▪ Tel. +49 991 270302-0 ▪ Fax -99 ▪
[email protected] ▪ www.b-plus.com
