Transcript
D ATA S H E E T
|
D 0 3 4 4- C | O C T O B E R 2 0 1 6
Cobolt 04-01 Series Powerful single frequency CW diode pumped lasers • CW power up to 400 mW in a perfect beam • Ultra-robust, hermetically sealed packages • True fiber pigtailed option Spectral linewidth < 1 MHz
Spectral Purity > 60dB
• 24 months warranty, unlimited hours
The Cobolt 04-01 Series lasers are continuous-wave diode-pumped laser (DPL) devices operating at a fixed wavelength between 457 nm and 1064 nm. The lasers are built using proprietary HTCure™ manufacturing technology for ultra-robustness in a compact hermetically sealed package which has been shown to withstand 60G mechanical shocks in operation as well as extreme storage temperature shocks (-30 to >100 degC) without any sign of degraded performance.
-30
Scanning Fabry-Perot FSR = 10 GHz
-50
-70
-90 482
10
Change in Power / RMS Noise (%)
Cobolt 04-01 Series M2 < 1.1
582
532,110
8
Power Stability
6
Wavelength (nm)
532,105
4
532,100
2 0
532,095
-2 532,090
-4 -6
532,085
-8 -10
Cobolt AB | Solna, Sweden | PHONE +46 8 545 912 30 | FA X +46 8 545 912 31 | E-MAIL
[email protected] | www.cobolt.se
532 Wavelength (nm)
Cobolt SambaTM 532nm Typical Wavlength and Power Stability
Typical Beam Profile
The lasers emit a very high quality laser beam with stable characteristics over a wide range of operating conditions. Single frequency operation provides a narrow spectral bandwidth and long coherence length. The lasers are designed and manufactured to ensure a high level of reliability. The Cobolt 04-01 Series lasers are intended for stand-alone use in laboratory environments or for integration as an OEM component in instruments for applications including fluorescence microscopy, flow cytometry, DNA sequencing, HCA, Raman spectroscopy, interferometry, holography and particle analysis.
-10
532,080 0
6
12 Time (hours)
18
24
Wavelength (nm)
• 457 nm, 473 nm, 491 nm, 515 nm, 532 nm, 561 nm, 594 nm, 660 nm, and 1064 nm
Cobolt SambaTM532nm Typical Spectral Purity
Single longitudinal mode (SLM)
Power (dB)
• Low noise, <0.25 % rms
D ATA S H E E T
|
D 0 3 4 4- C | O C T O B E R 2 0 1 6
Cobolt 04-01 Series Wavelength (nm)
Available Power Levels (mW)
Noise, 20 Hz - 20 MHz (pk-pk) Noise, 20 Hz - 20 MHz (rms) Long-term power stability (8 hrs ± 3°C) Beam divergence (full angle, mrad) Spatial mode (TEM00) Beam diameter at aperture (µm) Spectral linewidth (FWHM) Wavelength stability (after warm-up) Beam symmetry at aperture Beam pointing stability (over 10-40°C) Polarization ratio (linear, vertical) Total system power consumption Operating temperature Maximum laser head baseplate temp.
Twist™
Blues™
Calypso™
Fandango™
Samba™
Jive™
Mambo™
Flamenco™
Rumba™
457.0 ± 0.3
473.0 ± 0.3
491.5 ± 0.3
514.4 ± 0.3
532.1 ± 0.3
561.2 ± 0.3
593.6 ± 0.3
659.6 ± 0.3
1064.2±0.6
25 50 100 150
25 50 100 150 200 300 400
25 50 100 150 200
25 50
25 50
< 2% , typical < 1.5% < 0.25% , typical < 0.15% < 2%
25 50 75 100 < 3% < 0.3% < 3%
< 2% , typical < 1.5% < 0.25% , typical < 0.15% < 2% < 1.2
25 50 100
< 3% < 0.3% < 3% < 1.3
100
400
<1% < 0.1% < 2% < 1.5
0.6 K/W or 0.4 K/W * 102 x 60 x 40 4.0 x 2.4 x 1.6 190 x 72 x 28 7.6 x 2.9 x 1.1 RS-232 or USB
Model number structure RS-232 Controller USB Controller Warranty
CDRH/CE (key-switch for on/off) wavel-04-xy-pwr-500 wavel-04-xy-pwr-700 24 months
* For CalypsoTM 100mW, SambaTM 300mW and 400mW, JiveTM 200mW, and MamboTM 100mW
Cobolt AB | Solna, Sweden | PHONE +46 8 545 912 30 | FA X +46 8 545 912 31 | E-MAIL
[email protected] | www.cobolt.se
• Customized controller cable • Permanent SM/PM fiber pigtailing* • Modulated DPSSL with Integrated AOM * • Mount for external fiber coupling • Two lasers in one with Dual Line Combiner • Integrated optical isolator * • Laser head heatsink * Not available for all wavelength and power combinations, see www.cobolt.se for more information
< 1.6 M² < 1.2 1000 ± 50
M² < 1.1 700 ± 50 < 1 MHz 2 pm over ± 2 °C and 8 hrs >0.95 : 1 < 10 µrad / °C , typical 5 µrad / °C > 100:1 < 35 W, typical < 15 W 10-40°C 50 °C
Heat sink thermal resistance Recommended Laser head dimensions [mm] [inches] Controller dimensions [mm] [inches] Communication
Options & Accessories
Fiber Pigtailed Option
0.4 K/W
Integrated AOM Option
This device is sensitive to Elecrostatic Discharge (ESD). Always handle diode lasers with extreme care to prevent electrostatic discharge, the primary cause of unexpected diode failure. WARNING LASER RADIATION Avoid Exposure to beam Class 3B Laser Product Classified per IEC 60825-1:2014
OEM (auto-start mode) wavel-04-xy-pwr-600 wavel-04-xy-pwr-800
Wvl (nm) 457 473 491 515 532 561 594 660 1064
Max.Pwr (mW) 400 400 400 400 450 400 400 400 450
D ATA S H E E T
|
D 0 3 4 4- C | O C T O B E R 2 0 1 6
Cobolt 04-01 Series Electrical Interface
-
Cobolt 04-01 Laser head dimensions
K
95mm 3,7in
Interfaces
Connector
Function
Kycon KPJX-45, 4-pin HD-sub 26-pin, male HD-sub 26-pin, female USB-type mini B Molex 90130-3206
Power supply to Controller Connection to Laser Head Connection to Controller Control and monitoring via control commands Analog input 5 – 12 V => Laser ON Analog input <2.7 V => Laser OFF
-
Input power Laser Head to Controller Controller to Laser Head Data port Remote interlock & Analog signals
J
This document must not be copied,either completely or in part, without our permission. Any infringement will lead to legal proceedings. Cobolt AB
Mechanical Specifications
-
H
-
35mm 1,4in
-
G
M4 Clearence holes (X3)
Warm-up time
2 min
E
-
F
85mm 3,3in
-
D
-
40mm 1,6in
19mm 0,7in 102mm 4,0in
60mm 2,4in
C
2mm 0,1in
Roughness
2014-06-26
Ra
-
-
1:1 Sheet
Description
AM
1/1
Cobolt 04-01 series
Changed by
arvmal
Phone: +46 8 545 912 30
Vretenvägen 13
Fax: +46 8 545 912 31
SE-171 54 Solna, Sweden
E-mail:
[email protected]
K Scale
Surface treatment
uM
Cobolt AB
3D-model
Approval
Size
90107
A3
Drawing No
Rev
M90107
Part of
J
Drawn by
-
B-01
-
Gen tol
ISO 2768-m
Date (YYYY-MM-DD)
Material
-
Edges broken
Fillet radii
Cobolt Head Office
-
Unless otherwise stated
±0,1 ±0,2 ±0,3 ±0,5 ±0,8
-
0,5-6 (6)-30 (30)-120 (120)-400 (400)-1000
A
Excerpt from ISO 2768-m
B
Note: 1. This product must be compliant to RoHS2 Directive 2011/65/EU
-
-
Controller dimensions Denna handling får ej utan vårt medgivande delges annan, kopieras eller eljest obehörligen användas. Överträdelse härav beivras med stöd av gällande lag. Cobolt AB
This document must not be copied,either completely or in part, without our permission. Any infringement will lead to legal proceedings. Cobolt AB
11mm 0,4in
HÜBNER GmbH & Co. KG
Phone: +49 6251 770 6686
Heinrich-Hertz Strasse 2,
Fax: +49 6251 860 9917
34123 Kassel, Germany
E-mail:
[email protected]
-
Cobolt Inc.
Phone: 1 (408) 708 4351
2635 North First Street, Suite 228
Fax: 1 (408) 490 2774
San Jose, California, 95134, USA
E-mail:
[email protected]
28mm 1,1in
B 0,5-6 (6)-30 (30)-120 (120)-400 (400)-1000
±0,1 ±0,2 ±0,3 ±0,5 ±0,8
Date (YYYY-MM-DD)
2014-07-04
Unless otherwise stated Fillet radii
Edges broken
Gen tol
Roughness
ISO 2768-m
Ra
Drawn by
AM
Changed by
arvmal
-
-
Material
Scale
Surface treatment
1:1.4
uM
Sheet
Description
Laser driver Gen.5b
1/1
3D-model
11557
Drawing No
Approval Part of
-
Excerpt from ISO 2768-m
M11557
A
Denna handling får ej utan vårt medgivande delges annan, kopieras eller eljest obehörligen användas. Överträdelse härav beivras med stöd av gällande lag. Cobolt AB
-
C
72mm 2,8in
190mm 7,5in
-
D
-
E
158mm 6,2in
USA Sales Office
F
178mm 7,0in
-
G
-
H
51mm 2,0in
German Sales Office (incl. Austria and Switzerland)
Size
A3 Rev
B-01
Cobolt AB | Solna, Sweden | PHONE +46 8 545 912 30 | FA X +46 8 545 912 31 | E-MAIL
[email protected] | www.cobolt.se
Find local sales representatives at www.cobolt.se/contact-us Austrailia, Benelux, Brazil, China, Estonia, Latvia, Lithuania, France, India, Israel, Italy, Japan, Poland, Russia, Belarus, Singapore, Malaysia, Thailand, South Korea, Spain and Portugal, Taiwan, UK and Ireland
