Transcript
DATASHEET
Coriant® mTera® Flexi-rate Interface Modules Powered by Coriant CloudWave™ Optics Service providers require solutions with greater flexibility to address continuously shifting traffic patterns and increased capacity demands to support bandwidth-hungry applications. Coriant addresses these needs with a module portfolio including a flexi-rate interface module and interface modules leveraging Coriant CloudWave™ Optics for the Coriant® mTera® Universal Transport Platform (UTP) including the 14slot chassis and the 8-slot chassis. The mTera® UTP provides the OSM-4F flexi-rate interface module and a set of interface modules including the OSM-4C (4x100), OSM4S (40x10G SFP+), and OSM-5C (5x100G CFP2-ACO). The flexi-rate interface module and the interface modules support tunable modulation, flexible channel spectral width, flexible frequency tunability, high capacities, and high densities to provide the ideal balance between performance, capacity, and reliability across the most challenging networks.
OPTIMIZE NETWORKS WITH INTEGRATED LONG HAUL OPTICAL PERFORMANCE AND HIGHER CAPACITY WAVELENGTHS Equipped with two flexible physical interfaces, the OSM-4F flexi-rate interface module supports tunability between 2x100G QPSK, 2x150G 8QAM, and 2x200G 16QAM for up to 400G of line capacity. The gridless tunable technology of the mTera® flexi-grid interface, joined with the Coriant® hiT 7300 Multi-Haul Transport Platform flexi-grid infrastructure, supports channel grids that are optimized for either highest reach or highest fiber capacity. The flexi-rate interface module and the interface modules can be deployed in any hiT 7300 network, ensuring access to this advanced technology in existing infrastructure. The flexi-rate module is designed with state-of-the-art line coding that enables optimum optical reach in nationwide networks, maximizes throughput in metro/ regional networks, and provides maximum ROADM cascades in metro/regional networks, while enabling interoperability with 100G interfaces in the Coriant® 7100 Packet Optical Transport Platform, hiT 7300, and the Coriant Groove™ G30 DCI Platform. For long haul applications, Coriant uses advanced algorithms to mitigate nonlinear impairments and also increases the margins on the optical and electrical analog components by employing pre- and post-emphasis algorithms. The result is a solution that supports an unregenerated optical reach for 100G of >5000 km in terrestrial networks and dynamic tunability for up to 400G with an optical performance of >1000 km.
BENEFITS OF CORIANT® mTera® FLEXI-RATE MODULES ■■ Maximize fiber utilization with high speed transmission and tunable spectral widths for high spectral density super-channels ■■ Maximize mTera® UTP switching capacity with 4x100G and 5x100G interface modules supporting hybrid OTN and packet switching for up to 7T switching capacity in one shelf and 12T with dual chassis configuration ■■ Optimize spectral efficiency vs. reach with a powerful combination of flexi-grid, flexi-rate, and super-channel innovation ■■ Maximize network resiliency with optical and OTN based GMPLS flexible protection and restoration options ■■ Enable seamless integration into hiT 7300, 7100 Series, and third-party DWDM networks with dynamic performance and spectral efficiency compatibility ■■ Minimize wavelength regeneration with state-of-theart signal processing ■■ Save OpEx with the lowest power consumption for ultra-long haul and metro networks
MAXIMIZE SWITCHING CAPACITY WITH HIGHER CAPACITY INTERFACE MODULES The advanced OSM-4F flexi-rate interface module is an important component of the Coriant Dynamic Optical Cloud™ Solution and introduces a new level of flexibility, capacity, and cost efficiency to optical transmission and switching. With up to 500G interface capacity per slot, the flexi-rate interface module enables up to 7T switching in a single mTera® shelf and up to 12T in a dual-shelf configuration. Interfaces range from 10G clients and DWDM through 100G ULH and 200G 16QAM, while supporting a wide range of high capacity applications. All of these interfaces come with the universal switching capabilities inherent to the mTera® 14-slot shelf and the 8-slot shelf. OTN, Ethernet, MPLS-TP, and optical networks work seamlessly together to create and manage the most demanding services.
EXPERIENCE THE FLEXIBILITY OF CORIANT CLOUDWAVE™ OPTICS With Coriant CloudWave™ Optics, the OSM-4F flexi-rate interface module offers a high level of flexibility in optical transmissions. Using this technology, the line rate can be dynamically adjusted between 100G, 200G, 300G, and 400G, based on the required optical performance. Additionally, the OSM-4C provides a new level of 100G DWDM density to enable networking connectivity flexibility with pay-as-you-grow convenience. To accommodate these high capacity line interfaces, the OSM-4S and OSM-5C modules along with the OSM-2C, OSM-2S, OSM1S, and SSM-2S modules provide the client capacity assurance that the line interfaces are effectively utilized. All of these mTera® interface modules interwork seamlessly with the hiT 7300, 7100 Series, and Coriant Groove™ G30 DCI Platform for complete end-to-end solutions.
MAXIMIZE NETWORK EFFICIENCY WITH THE CORIANT DYNAMIC OPTICAL CLOUD™ Delivering a whole new level of adaptability for optical transmissions, Coriant CloudWave™ Optics along with the comprehensive management of the Coriant® Transport Network Management System (TNMS) and the programmable, dynamic control of the Coriant Transcend™ SDN Solution represent important components of the Coriant Dynamic Optical Cloud™ Solution. By combining Coriant’s fully adaptable optical transport platforms with optical transmissions provided by Coriant CloudWave™ Optics, flexible add/drop including CDC ROADM technology, and the Coriant Transcend™ SDN Solution, network operators have a powerful end-to-end networking solution that optimizes connectivity across network layers and can be programmed to efficiently and seamlessly adapt to any network requirements.
TECHNICAL SPECIFICATIONS OSM-4F/OSM-4FE Flexi-rate Interface • 2x100G QPSK, 2x150G 8QAM, 2x200G 16QAM software-switchable modulation • Capacity per fiber in meshed networks (C-band): • QPSK: 9.6-12.8 Tbps • 8QAM: 14.4-17.3 Tbps • 16QAM: 19.2-25.6 Tbps • L-band ready • Gridless tunability 191.35-196.1 THz • -2:4 dBm output power per channel • -20:0 dBm input power per channel • <1e-15 guaranteed bit error rate • Supports filter-less combining up to 128 channels • Dark wavelength tuning • Forward error correction (FEC) operation: • High gain FEC for optimum reach • Metro/regional FEC (commercial CFP line interoperability) • Enables 50 ms system resynchronization functionality • Supports hiT 7300, 7100 Series, and mTera® UTP optical infrastructures • Power watts/Gbps: 2W/Gbps (QPSK), 1.33W/Gbps (8QAM), 1W/Gbps (16QAM)
2
Optical Performance • Terrestrial transmission of >5,000 km for 100G and >1,000 km for 400G • Submarine reach up to 11,000 km on newly designed links: • Chromatic dispersion compensation: >300 ns/nm (>14,000 km) • PMD tolerance: 50 ps mean DGD • PDL tolerance: 10 dB • In-band communication channel for adaptive highest capacity modulation • Nyquist pulse shaping enabling scalable super-channel operation • Nonlinearity tolerant pulse shaping • Chromatic dispersion pre-emphasis for legacy submarine links • Optical performance monitoring: CD, PMD, PDL, Q-factor, FEC statistics OSM-4C/OSM-4CE CFP2-ACO Interface • 4x100G QPSK • 4x pluggable CFP2-ACO • 9.6-12.8 Tbps capacity per fiber • Supports filter-less combining up to 128 channels • Supports filter-less selection of a wavelength from up to 128 channels • Metro/regional FEC (commercial CFP line interoperability)
Coriant® mTera® Flexi-rate Interface Modules
• Supports hiT 7300, 7100 Series, and mTera® UTP optical infrastructures • Power watts/Gbps: 1W/Gbps • <1e-15 guaranteed bit error rate Optical Performance • Terrestrial transmission of >2200 km for 100G • Chromatic dispersion compensation: 40 ns/nm (>2,200 km) • PMD tolerance: 25 ps mean DGD • PDL tolerance: 3 dB • Optical performance monitoring: CD, PMD, PDL, Q-factor, FEC statistics OSM-4S/OSM-4SE • SFP+ Interfaces • 40x10G SFP+ • OTU2 DWDM tunable • i.4 and i.7 FEC • 10GBASE-R, 10GBASE-W • OC-192/STM-64 • OTU2, OTU2e • Fibre Channel, InfiniBand, and any-rate client hardware capable continued on next page
TECHNICAL SPECIFICATIONS OSM-5C/OSM-5CE CFP2 Interfaces • 5x100G CFP2 • 100GBASE-R • OTU4 grey light • OTU4 DWDM Tunable Digital CFP2 (future) Common Capabilities OTN • ODU0/ODU1/ODU2/ODU3/ODUflex switching • OTU/ODU OAM • TCM support, up to 6 levels • SNC/I/N/S protection • Hybrid packet/OTN transport per port • Packet adaptation via GFP-F • Payload encryption (AES-256, FIPS 140-2 Level 2) (hardware ready on OSM4FE, OSM-4CE, OSM-4SE, OSM-5CE)
Packet • MPLS-TP, CoE, and bridged Ethernet support • MEF CE2.0 services (E-Line, E-Access, E-LAN, E-Tree) • Hierarchical policing and scheduling • G.8031 protection with CoE and bridged Ethernet • G.8131/RFC6378 protection with MPLSTP • G.8032, R/M/STP with bridged Ethernet • Link Aggregation • Ethernet and MPLS-TP OAM
These trademarks are owned by Coriant or its affiliates: Coriant®, Coriant CloudWave™, Coriant Dynamic Optical Cloud™, Coriant Groove™, Coriant Transcend™, mTera® , Nano™, and Pico™. Other trademarks are the property of their respective owners. Statements herein may contain projections regarding future products, features, or technology and resulting commercial or technical benefits, which may or may not occur. This publication does not constitute legal obligation to deliver any material, code, or functionality. This document does not modify or supplement any product specifications or warranties. Copyright © 2016 Coriant. All Rights Reserved. 74C.0135 Rev. A 03/16
www.coriant.com
