Transcript
EPE1FDL 1-ch Ultra-long-distance PoE Extender
Features
Overview
Extends PoE signal to 500 meters (1640 feet), can be cascaded to 2500 meters
The ultra-long-distance PoE extender EPE1FDL comes with state-of-the-art Powerreach technology, not only completely supports standard Ethernet 10/100BASE-T potocols, but also can conduct up to 500m distance PoE transmission under 100Mbps data rate on a RJ-45 copper interface.
Compliant with standard Ether net protocols and devices No local power required Auto-switching dual power inputs: PoE or local 15-48VDC power Dual power outputs: PoE or 12VDC output for non-PoE devices Input voltage compensation for wire voltage drop of long-distance transimission S h o r t - c i rc u i t p r o t e c t i o n , o v e r l o a d protection and surge protection
Datasheet
EPE1FDL 1-ch Ultra-long-distance PoE Extender Application 1: connecting PoE cameras deployed in different distances A real IP surveillance system usually includes many PoE-powered IP cameras deployed in different distances from the control
Application 2: connecting the remote edge switches to the core network In the medium-large-sized IP surveillance systems, many entrylevel PoE switches are deployed on the edge to simplify the traffic
room. Superseding the costly optical fiber, our Power-Reach PoE extender provides a much more cost-effective cabling option to improve the flexibility of these systems by connecting IP cameras in wide areas up to 500 meters away - no local power required, can be cascaed for 2500-merter PoE transmission.
management and save cabling cost. In these cases, our PowerReach PoE extender not only provides a reliable wired data connection from the front side to the backbone, but also cuts down the TCO by eliminating the need of a power outlet for every endpoint.
Datasheet
EPE1FDL 1-ch Ultra-long-distance PoE Extender
Specifications Power over Ethernet Specifications
Power Consumption
System on: 0.2W Full load: 1.0W
PoE Standard
IEEE 802.3af
PoE Power Supply Type
End-Span
PoE Input Power
48VDC, 15.4W max
Physical Specifications
PoE Output Power
48VDC, 15.4W max
Dimensions (W x D x H):
108 x 60 x 30 mm (4.25 x 2.36 x 1.18 in.)
Power Pins Assignment
1/2(+), 3/6(-)
Weight:
0.2 kg (0.44 lbs)
PoE Ports Assignment
PoE input: 1x RJ-45 with Power-reach function PoE output: 1x RJ-45 with Power-reach function
Connected with Power-reach port: 500 E x t e n d s R a n g e ( R J - 4 5 meters (1640ft) max.) Connected with standard Ethernet port: 100 meters (328ft)
Network Specifications – Input: 1 x 10/100Mbps RJ-45 port, IEEE802.3af PoE compliant – Output: 1 x 10/100Mbps RJ-45 port, IEEE802.3af PoE compliant – Full-duplex operation at the rate of 100 Mbps and 10 Mbps – Fully compliant with IEEE 802.3TM, IEEE 802.3u, and IEEE 802.3ab standards – Line-side loopback and low EMI emissions – Support for jumbo packets
Standards Conformance – IEEE 802.3af Power over Ethernet – IEEE 802.3 10Base-T – IEEE 802.3u 100Base-TX – FCC Part 15 Class A, CE
Environmental Specifications • Operating
Humidity max: 95% RH(non-condensing), Temperature: -10 °C to 50 °C
• Storage
Humidity max: 95% RH(non-condensing), Temperature: -20 °C to 70 °C
Electrical Specifications Input Voltage
15~48VDC
Input Power Connectors
1 x 2-pin 2.45mm screwless terminal block 1 x 5.5mm barrel DC connector (Center pin diameter 2.0mm)
Output Voltage
48VDC at PoE output port 12VDC at DC connectors
1 x 2-pin 2.45mm screwless terminal block Output Power Connectors 1 x 5.5mm barrel DC connector (Center pin diameter 2.0mm)
Datasheet
EPE1FDL 1-ch Ultra-long-distance PoE Extender
Engineering Drawing Demision
Ports Assignment - - Input Ports
- - Output Ports
Optional Accessories
AC-DC Power Adapter
Wall-mount Brackets
Screws for Wall-mount Installation 除非另外指定: 尺寸使用毫米 表面粗糙度: 公差: 线性: 角度:
将锐边清除 毛刺并折断
表面粗糙度:
名称
签名
日期
不调整工程图比例
修订
标题:
绘制 检查 批准 制造 验检
材料:
交换机上柜支架平头螺 工程图号
Datasheet 重量:
比例:5:1
图纸 1 (共1)
WWW.ELITEUN.COM
