Transcript
Series AM1DS-NZ 1 Watt | DC-DC Converter FEATURES: • • • •
RoHS compliant High efficiency up to 76% Low profile plastic package 7 pin SIP package
• • • •
Operating temperature -40°C to + 85°C Continuous short circuit protection Pin compatible with multiple manufacturers Up to 3000VDC Isolation
Models Single output Input Voltage (V)
Output Voltage (V)
AM1DS-0303S-NZ AM1DS-0305S-NZ AM1DS-0505S-NZ AM1DS-0509S-NZ AM1DS-0512S-NZ AM1DS-0515S-NZ AM1DS-0524S-NZ AM1DS-1205S-NZ AM1DS-1209S-NZ AM1DS-1212S-NZ AM1DS-1215S-NZ AM1DS-1515S-NZ AM1DS-2403S-NZ AM1DS-2405S-NZ AM1DS-2412S-NZ AM1DS-2415S-NZ
3.0-3.6 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4
3.3 5 5 9 12 15 24 5 9 12 15 15 3.3 5 12 15
AM1DS-0305SH30-NZ AM1DS-0505SH30-NZ AM1DS-0512SH30-NZ AM1DS-0515SH30-NZ AM1DS-0524SH30-NZ AM1DS-1205SH30-NZ AM1DS-1212SH30-NZ AM1DS-2405SH30-NZ
3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 21.6-26.4
5 5 12 15 24 5 12 5
Input Voltage (V)
Output Voltage (V)
AM1DS-0505D-NZ AM1DS-0509D-NZ AM1DS-0512D-NZ AM1DS-0515D-NZ AM1DS-0524D-NZ AM1DS-1205D-NZ AM1DS-1212D-NZ AM1DS-1215D-NZ AM1DS-2405D-NZ AM1DS-2412D-NZ AM1DS-2415D-NZ
4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4
±5 ±9 ±12 ±15 ±24 ±5 ±12 ±15 ±5 ±12 ±15
AM1DS-0505DH30-NZ AM1DS-0512DH30-NZ AM1DS-0515DH30-NZ AM1DS-1212DH30-NZ
4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2
±5 ±12 ±15 ±12
Model
Output Current max (mA)
Isolation (VDC)
Efficiency (%)
303 200 200 112 83 67 42 200 112 83 67 67 303 200 83 67
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
68 70 73 73 75 75 76 73 72 75 76 75 70 70 75 76
200 200 83 67 42 200 83 200
3000 3000 3000 3000 3000 3000 3000 3000
70 73 75 75 76 73 75 70
Isolation (VDC)
Efficiency (%)
±100 ±56 ±42 ±34 ±21 ±100 ±42 ±34 ±100 ±42 ±34
1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000
69 73 74 74 76 70 76 76 68 76 76
±100 ±42 ±34 ±42
3000 3000 3000 3000
69 74 74 76
Models Dual output Model
www.aimtec.com F 051e R12.A
Output Current max (Ma)
Tel: +1 514 620 2722 1 of 3
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
Series AM1DS-NZ 1 Watt | DC-DC Converter Models Dual output (continued) Model
Input Voltage (V)
Output Voltage (V)
AM1DS-1215DH30-NZ AM1DS-2405DH30-NZ AM1DS-2412DH30-NZ
10.8-13.2 21.6-26.4 21.6-26.4
±15 ±5 ±12
Output Current max (Ma) ±34 ±100 ±42
Isolation (VDC)
Efficiency (%)
3000 3000 3000
76 70 76
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.
Input Specifications Parameters Voltage range
Nominal
Typical
3.3 5 12 15 24
Maximum
Units
3.0-3.6 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Capacitor
Filter Start up time
VDC
ms
Absolute Maximum Rating
3.3 5 12 15 24
7 9 18 21 30 1 50
Peak Input Voltage time No Load Input Current
VDC
s mA
Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance
Conditions
Typical
60 sec
Rated
Units
1000, 3000
VDC MOhm pF
> 1000 15
Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Minimum Load Current
Conditions
Typical
Maximum
±5 Continuous Auto recovery ±1.5 20% ±0.03 200 10
For 1.0% change of Vin load 10~100% 20MHz Bandwidth
Units %
% of Vin % %/oC mV p-p % of Max
General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight www.aimtec.com F 051e R12.A
Conditions 100% load
Typical
Maximum
100 -40 to +85 -55 to +125 100 Not-Required Free air convection 95 Non-conductive black plastic (UL94V-0 rated) 2.3 Tel: +1 514 620 2722 2 of 3
Units KHz o C o C o C %/ oC % RH g Toll free: + 1 888 9 AIMTEC (924 6832) North America only
Series AM1DS-NZ 1 Watt | DC-DC Converter General Specifications (continued) Parameters Dimensions (L x W x H) MTBF Maximum soldering temperature
Conditions
Typical
Maximum
Units
0.77 x 0.24 x 0.37 inches 19.5 x 6.00 x 9.35 mm >1 940 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5 mm from case for 10sec 300
o
C
Pin Out Specifications Pin 1 2 4 5 6 7
1000 VDC Single + V Input - V Input - V Output No pin + V Output No pin
Dual + V Input - V Input - V Output Common + V Output No pin
3000VDC Single + V Input - V Input No pin - V Output No pin + V Output
Dual + V Input - V Input No pin - V Output Common + V Output
Dimensions
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com F 051e R12.A
Tel: +1 514 620 2722 3 of 3
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
