Transcript
ASD10H
I sol at e d a n d R e gul at ed 10 WATT Open F ra me DC/DC Co n ve rte r
series
Wide 4:1 Input Range 9 to 36V or 18 to 75V Available High Efficiency Regulated Outputs 1500VDC Isolation Integral Finned Heatsink EN60950-1 & UL60950-1 Approved Unit measures 1”W x 2”L x 0.41”H
Model Number
Output Voltage
Output Amps
Input Range
SINGLE OUTPUT ASD10H-12S3 3.3 VDC ASD10H-48S3 ASD10H-12S5 5 VDC ASD10H-48S5 ASD10H-12S9 9 VDC ASD10H-48S9 ASD10H-12S12 12 VDC ASD10H-48S12 ASD10H-12S15 15 VDC ASD10H-48S15
2.5 2.5 2 2 1.1 1.1 0.83 0.83 0.67 0.67
9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC
DUAL OUTPUT ASD10H-12D5 +/-5 VDC ASD10H-48D5 ASD10H-12D12 +/-12 VDC ASD10H-48D12 ASD10H-12D15 +/-15 VDC ASD10H-48D15
+/-1 +/-1 +/-0.42 +/-0.42 +/-0.33 +/-0.33
9-36VDC 18-75VDC 9-36VDC 18-75VDC 9-36VDC 18-75VDC
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458
I sol at e d a n d R e gul at ed 10 WATT Open F ra me DC/DC Co n ve rte r
12VDC 9-36 50V (12V Models), * 100V (48V Models), * 10 mS duration, min.
48VDC 18-75 VDC
OUTPUT SPECIFICATIONS Voltage and Current Preset Accuracy Cross Regulation (Duals) Load Regulation 20% - FL Line Regulation Minimum Load Ripple/Noise (Pk-Pk, typ) Single 3.3V Single 5V Single 9,12 Single15V Dual 5V Dual 12, 15V Overvoltage Protection Short Circuit Protection
series
GENERAL SPECIFICATIONS
INPUT SPECIFICATIONS Input Voltage, Nominal Input Voltage Ranges Input Surge Voltage
ASD10H
See Selection Chart Single: +/- 3% max. Duals: +/- 4% max. 5-8% typ. single: +/- 0.5% duals: +/-1%, +/-3% (5V mod) single: +/- 0.5% duals: +/- 1% 5% of Full Load (Note 1) 150mV 100mV (12Vin), 150mV (48Vin) 50mV (12Vin), 100mV (48Vin) 50mV 150mV 50mV Clamp, 130-150% * Clamp, need to release load
On/Off Control Shutdown Idle Current Input-Out Isolation In/Out Capacitance Efficiency
(Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF 15mA 1500VDC (48V) 500 VDC (12V) 1000 pF 82%, typ
ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Relative Humidity Storage Temperature Maximum Heatsink Temp MTBF Shock/Vibration Safety UL/cUL: UL-EU:
-25 to +71°C(FL) 0 to 95%, non-cond -40 to +125°C * 110°C * 1,000,000 Hrs Mil Std 217, 25°C To MIL-STD 810°C UL60950-1 2nd ed./ CAN/CSA C22.2 60950-1 2nd ed. EN60950-1 2nd ed.
PHYSICAL SPECIFICATIONS Heatsink Material Construction Weight
Aluminum Open Frame 0.57 oz, (16g)
NOTES All specifications are typical at nominal input, full load, and 25°C unless otherwise noted
1. Ripple & Noise is measured by using a 20MHz bandwidth oscilloscope and terminating the output with a 47uF electrolytic capacitor paralleled with a 0.1uF ceramic capacitor.
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied.
WWW.ASTRODYNE.COM
ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458
ASD10H
I sol at e d a n d R e gul at ed 10 WATT Open F ra me DC/DC Co n ve rte r
series
MECHANICAL DIMENSIONS
.41in 10.52mm max Pin# Single Outputs Dual Outputs .24in 6.0mm min 3
1.00in 25.4mm
.60in 15.24mm
.40in 10.16mm
1 2
4
6
5
.50in 12.7mm
.60in 15.24mm 1.40in 35.56mm 2.00in 50.8mm
.10in 2.54mm
.90in 22.86mm
1
+ Input
+ Input
2
- Input
- Input
3 4 5
+ Output N/A - Output
+ Output Common - Output
6
Control
Control
.10in 2.54mm
TOLERANCES : .XX 0.5mm(0.02in) : .XXX 0.25mm(0.01in)
0H_B DESCRIPTION
DATE
Change height from 9.52 to 10.52mm
OUTPUT DERATING CURVE
2012/10/29
DIMENSION X<8 8
