Transcript
FED30TW SERIES DC-DC CONVERTER 4 : 1 ULTRA WIDE INPUT RANGE UP TO 30Watts
FEATURES
APPLICATIONS
• 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 2.00 X 1.00 X 0.40 INCH • SIX-SIDED CONTINUOUS SHIELD • UL60950-1, EN60950-1, IEC60950-1, & EN50155 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
OCP
• WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
OVP
OTP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Input Range
Output Voltage
VDC
VDC
9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75
3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15 3.3 / ±12 3.3 / ±15 5 / ±12 5 / ±15
Model Number FED30-24T3312W FED30-24T3315W FED30-24T0512W FED30-24T0515W FED30-48T3312W FED30-48T3315W FED30-48T0512W FED30-48T0515W
Output Current @Full Load Min. Load (1) mA 500 / ±42 500 / ±33 400 / ±42 400 / ±33 500 / ±42 500 / ±33 400 / ±42 400 / ±33
Input Current @ No Load
Efficiency
Maximum Capacitor Load(2)
mA
%
1F
105 105 105 105 55 55 55 55
87 87 88 88 87 87 88 88
15000 / ±340 15000 / ±220 8000 / ±340 8000 / ±220 15000 / ±340 15000 / ±220 8000 / ±340 8000 / ±220
Full Load mA 5000 / ±416 5000 / ±333 4000 / ±416 4000 / ±333 5000 / ±416 5000 / ±333 4000 / ±416 4000 / ±333
PART NUMBER STRUCTURE
FED30 - 48 Series Name
Input Voltage (VDC) 24: 9~36 48: 18~75
T
0515
Output Quantity
Output Voltage Primary / Auxiliary (VDC) 3312: 3.3 / ±12 3315: 3.3 / ±15 0512: 5 / ±12 0515: 5 / ±15
T: Triple
INPUT SPECIFICATIONS Parameter
Input Range
4:1
N
HS
Remote Control Option
Assembly Option
1: Positive logic N: Negative logic
Conditions
Operating input voltage range
24Vin(nom) 48Vin(nom)
Input reflected ripple current Start up voltage Shutdown voltage Start up time
Constant resistive load
Input surge voltage
100 ms, max.
Input filter Remote ON/OFF
Referred to –Vin pin
1
W -
1: No assembly HS: Heat-sink HC: Heat-sink with Clamp
Min.
Typ.
Max.
Unit
9 18
24 48 20
36 75
VDC
24Vin(nom) 48Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48 Vin(nom) Positive logic DC-DC ON (Standard) DC-DC OFF Negative logic DC-DC ON (Option) DC-DC OFF Input current of Ctrl pin Remote off input current
111234567289AB
mAp-p 9 18
VDC
8 16
-0.5
VDC
30 30 50 100 Pi type Open or 3 ~ 12VDC Short or 0 ~ 1.2VDC Short or 0 ~ 1.2VDC Open or 3 ~ 12VDC +0.5 3
ms VDC
mA mA
2014/04/30
FED30TW OUTPUT SPECIFICATIONS Parameter
Conditions
Voltage accuracy Line regulation
Low Line to High Line at Full Load
Load regulation
Min. Load to Full Load
Ripple and noise
20MHz bandwidth (Measured with a 0.11F/50V MLCC)
Temperature coefficient Transient response recovery time Over voltage protection
Over load protection Short circuit protection
1 minute
Isolation resistance Isolation capacitance Switching frequency Safety approvals Case material Base material Potting material Weight MTBF
500VDC
+1.0 +5.0 +1.0 +5.0 +1.0 +5.0
Unit % % % mVp-p
+0.02 250 3.9 6.2 15 18
℃
%/ 1s
VDC
150 % Continuous, automatics recovery
Conditions
Min.
Input to Output Input (Output) to Case
Typ.
Max.
1600 1600 1
Unit VDC
G2 1500 pF 360 400 440 kHz IEC60950-1, UL60950-1, EN60950-1 Nickel-coated copper FR4 PCB Epoxy(UL94 V-0) 30.5g (1.07oz) 1.177 x 106 hrs
MIL-HDBK-217F, Full load
ENVIRONMENTAL SPECIFICATIONS Parameter
Max.
50 75
3.3Vout 5Vout 12Vout 15Vout
% of Iout rated; Hiccup mode
Isolation voltage
Conditions
Operating ambient temperature
Min. Without derating With derating
Typ.
Max.
-40 +50
+50 +85 105 115
-55 Vertical direction by natural convection (20LFM)
Without heat-sink With heat-sink
Thermal shock Vibration Relative humidity
+125 12 10
Unit
℃ ℃ ℃ ℃ ℃/W
MIL-STD-810F MIL-STD-810F 5% to 95% RH
EMC SPECIFICATIONS Parameter EMI (3) ESD Radiated immunity Fast transient (4) Surge (4) Conducted immunity
Typ.
-1.0 -5.0 -1.0 -5.0 -1.0 -5.0
-0.02 25% load step change Zener diode clamp
GENERAL SPECIFICATIONS Parameter
Maximum case temperature Over temperature protection Storage temperature range Thermal impedance
Min. 3.3Vout, 5Vout 12Vout, 15Vout 3.3Vout, 5Vout 12Vout, 15Vout 3.3Vout, 5Vout 12Vout, 15Vout 3.3Vout, 5Vout 12Vout, 15Vout
Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6
Air ± 8kV and Contact ± 6kV 10 V/m ±2kV ±1kV 10 Vr.m.s
Level Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1. 2. 3. 4.
The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Test by minimum input and constant resistive load The standard modules meet EN55022 Class A and Class B with external components.For more detail information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: 24VDC input Nippon chemi-con KY series, 3301F/50V The filter capacitor Power Mate suggest::48VDC input Nippon chemi-con KY series, 2201F/100V
CAUTION: This power module is not internally fused. An input line fuse must always be used.
2
111234567289AB
2014/04/30
FED30TW CHARACTERISTIC CURVE
FED30-48T0515W Derating Curve
FED30-48T0515W Derating Curve With Heat-sink
FED30-48T0515W Efficiency vs. Input Voltage
FED30-48T0515W Efficiency vs. Output Load
MECHANICAL DRAWING PIN CONNECTION PIN 1 2 3 4 5 6 7
TRIPLE +Vin -Vin Ctrl +Aux -Aux Common +Vout
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
3
111234567289AB
2014/04/30
