Transcript
FKC08W SERIES DC-DC CONVERTER 4:1 ULTRA WIDE INPUT RANGE UP TO 8 Watts
FEATURES
APPLICATIONS
• NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, IEC60950-1, & EN50155 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH
1600VDC ISOLATION
REMOTE CONTROL
UVP
OCP
• RAILWAY SYSTEM • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT
SCP
TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number FKC08-24S3P3W FKC08-24S05W FKC08-24S12W FKC08-24S15W FKC08-24D05W FKC08-24D12W FKC08-24D15W FKC08-48S3P3W FKC08-48S05W FKC08-48S12W FKC08-48S15W FKC08-48D05W FKC08-48D12W FKC08-48D15W FKC08-110S3P3W FKC08-110S05W FKC08-110S12W FKC08-110S15W FKC08-110D05W FKC08-110D12W FKC08-110D15W
Input Range
Output Voltage
Output Current @Full Load
Input Current @ No Load
Efficiency
Maximum Capacitor Load
VDC 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 9 ~ 36 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 18 ~ 75 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160 43 ~ 160
VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15
mA 2400 1600 666 533 ±800 ±333 ±267 2400 1600 666 533 ±800 ±333 ±267 2400 1600 666 533 ±800 ±333 ±267
mA 40 40 25 25 20 25 25 20 20 13 13 10 13 13 8 8 4 4 5 5 5
% 85 87 86 86 84 86 86 85 87 87 88 84 87 87 84 85 86 86 82 85 85
1F 1330 1330 288 200 ±900 ±133 ±90 1330 1330 288 200 ±900 ±133 ±90 1330 1330 288 200 ±900 ±133 ±90
PART NUMBER STRUCTURE
FKC08 - 48 Series Name
Input Voltage (VDC) 24: 9~36 48:18~75 110:43~160
S Output Quantity S:Single
D: Dual
1
05 W - SMD Output Voltage (VDC) 3P3: 3.3 05: 5 12:12 15:15
Input Range 4:1
Mounting Type Option 1: DIP type SMD: SMD type
05:± 5 12:±12 15:±15
111234567289AB
2014/05/27
FKC08W INPUT SPECIFICATIONS Parameter
Conditions
Operating input voltage range
24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) 24Vin(nom) 48Vin(nom) 110Vin(nom) Power up Remote ON/OFF 24Vin(nom) 48Vin(nom) 110Vin(nom)
Start up voltage
Shutdown voltage
Start up time
Constant resistive load
Input surge voltage
100 ms, max.
Input reflected ripple current Input filter Remote ON/OFF
Referred to –Vin pin
Low Line to High Line at Full Load No Load to Full Load
DIP type
DIP type
Asymmetrical load 25%/100% FL 20MHz bandwidth
Case material Base material Potting material Weight MTBF
2
Min. Single Dual Single Dual Single Dual Single Dual Dual 24Vin(nom) 48Vin(nom) 110Vin(nom)
3.3Vout 5Vout 12Vout 15Vout
% of Iout rated
1 minute
Conditions DIP type SMD type
Isolation resistance Isolation capacitance Switching frequency Safety approvals
VDC
VDC ms VDC mAp-p
Pi type Open or 3.0 ~ 12VDC Short or 0 ~ 1.2VDC +0.5 2.5
Typ.
Input to Output Input (Output) to Case Input to Output Input (Output) to Case
500VDC
Unit
+1.0 +0.2 +0.5 +1.0 +1.0 +1.0 +0.3 +0.8 +0.8 +0.8 +5.0
% %
50 50 75
111234567289AB
%
% mVp-p
℃
+0.02 %/ 250 1s 3.9 6.2 VDC 15 18 150 % Continuous, automatics recovery
Min. 1600 1600 1600 1000 1 270
MIL-HDBK-217F
mA mA
Max.
-1.0 -0.2 -0.5 -1.0 -1.0 -1.0 -0.3 -0.8 -0.8 -0.8 -5.0
-0.02 25% load step change Single Output
GENERAL SPECIFICATIONS Parameter Isolation voltage
-0.5
Unit VDC
50 100 170
Conditions
SMD type
Over load protection Short circuit protection
36 75 160 9 18 43
8 16 40 450 5
DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current
10% Load to 90% Load
Temperature coefficient Transient response recovery time Over voltage protection
Max.
24 48 110
Positive logic
SMD type
Cross regulation Ripple and noise
Typ.
9 18 43
20
OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation
Min.
Typ.
Max.
Unit VDC
G2 pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 EN50155 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 2.832 x 106 hrs 1500 330
VER: 19
2014/05/27
FKC08W ENVIRONMENTAL SPECIFICATIONS Parameter
Conditions 3.3Vout, ±5Vout
Operating ambient temperature(1)
Others Maximum case temperature Storage temperature range Thermal impedance Thermal shock Shock Vibration Relative humidity
Typ.
Max.
-40 +70 -40 +78
+70 +105 +78 +105 105 +125
-55 Natural convection
20
Unit
℃ ℃ ℃ ℃/W
MIL-STD-810F EN61373, MIL-STD-810F EN61373, MIL-STD-810F 5% to 95% RH
EMC SPECIFICATIONS Parameter EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity
Min. Without derating With derating Without derating With derating
Conditions EN55022, EN55011 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6
Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV ± 2kV 10 Vr.m.s
Level Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A
Note: 1.
Converter can meet the railway T2 and TX temperature requirement. T2: -40 ºC ~ +70 ºC as all models; TX: -40 ºC ~ +85 ºC as power derating to 55% output power. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: : 24Vin/48Vin Nippon chemi-con KY series, 2201F/100V : 110 Vin Nippon chemi-con KXJ series, 1501F/200V CAUTION: This power module is not internally fused. An input line fuse must always be used.
CHARACTERISTIC CURVE
FKC08-48S05W Derating Curve
3
FKC08-48S05W Efficiency vs. Input Voltage
111234567289AB
FKC08-48S05W Efficiency vs. Output Load
VER: 19
2014/05/27
FKC08W MECHANICAL DRAWING DIP type
PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11
SMD type
NC NC
PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 Others
NC NC NC
DUAL Ctrl -Vin -Vin
PIN
SINGLE
DUAL
23 22
+Vin +Vin
+Vin +Vin
Common -Vout
16 14
-Vout +Vout
Common +Vout
DUAL Ctrl -Vin -Vin
PIN
SINGLE
DUAL
23 22
+Vin +Vin
+Vin +Vin
Common -Vout NC
16 14
-Vout +Vout
Common +Vout
1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1)
4
111234567289AB
VER: 19
2014/05/27
