Datasheet For Fkc12-24d12 By Power Mate Technology Co., Ltd.

Transcript

FKC12 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 12 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION REMOTE CONTROL UVP OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 2.5 3.3 5.1 12 15 ±5 ±12 ±15 2.5 3.3 5.1 12 15 ±5 ±12 ±15 2.5 3.3 5.1 12 15 ±5 ±12 ±15 mA 3500 3500 2400 1000 800 ±1200 ±500 ±400 3500 3500 2400 1000 800 ±1200 ±500 ±400 3500 3500 2400 1000 800 ±1200 ±500 ±400 mA 50 60 53 15 17 24 19 24 36 36 35 16 17 15 15 18 10 14 23 11 5 6 6 6 % 82 84 86 86 86 82 87 87 83 85 87 87 87 83 88 88 83 85 87 87 87 83 88 88 1F 2000 2000 2000 430 300 ±1250 ±200 ±120 2000 2000 2000 430 300 ±1250 ±200 ±120 2000 2000 2000 430 300 ±1250 ±200 ±120 FKC12-12S2P5 FKC12-12S3P3 FKC12-12S05 FKC12-12S12 FKC12-12S15 FKC12-12D05 FKC12-12D12 FKC12-12D15 FKC12-24S2P5 FKC12-24S3P3 FKC12-24S05 FKC12-24S12 FKC12-24S15 FKC12-24D05 FKC12-24D12 FKC12-24D15 FKC12-48S2P5 FKC12-48S3P3 FKC12-48S05 FKC12-48S12 FKC12-48S15 FKC12-48D05 FKC12-48D12 FKC12-48D15 PART NUMBER STRUCTURE FKC12 - 48 Series Name Input Voltage (VDC) 12: 9~18 24:18~36 48:36~75 S Output Quantity Output Voltage (VDC) S:Single 2P5: 2.5 3P3: 3.3 05: 5.1 12:12 15:15 D: Dual 1 05 - SMD Mounting Type Option 1: DIP type SMD: SMD type 05:± 5 12:±12 15:±15 111234567289AB 2014/05/27 FKC12 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 12Vin(nom) 24Vin(nom) 48Vin(nom) Start up voltage Shutdown voltage Start up time Constant resistive load Input surge voltage 100 ms, max. Input reflected ripple current Input filter Remote ON/OFF Referred to –Vin pin No Load to Full Load DIP type SMD type Asymmetrical load 25%/100% FL 20MHz bandwidth VDC ms VDC Min. Single Dual Single 2.5Vout Single others Dual Single 2.5Vout Single others Dual Dual mAp-p Pi type Open or 3.0 ~ 12VDC Short or 0 ~ 1.2VDC +0.5 2.5 Typ. 2.5Vout 3.3Vout 5.1Vout 12Vout 15Vout % of Iout rated 1 minute Conditions DIP type Input to Output Input (Output) to Case Input to Output Input (Output) to Case 500VDC Unit +1.2 +0.2 +0.5 +1.0 +0.5 +1.0 +1.0 +1.0 +1.0 +5.0 % 111234567289AB % % % mVp-p %/ 1s ℃ +0.02 250 3.9 3.9 6.2 VDC 15 18 150 % Continuous, automatics recovery Min. 1600 1600 1600 1000 1 360 MIL-HDBK-217F mA mA Max. -1.2 -0.2 -0.5 -1.0 -0.5 -1.0 -1.0 -1.0 -1.0 -5.0 -0.02 SMD type 2 VDC 85 25% load step change Single Output GENERAL SPECIFICATIONS Parameter Case material Base material Potting material Weight MTBF -0.5 Unit VDC 36 50 100 Conditions Load regulation Isolation resistance Isolation capacitance Switching frequency Safety approvals 18 36 75 9 18 36 8 16 33 450 5 DC-DC ON DC-DC OFF Input current of Ctrl pin Remote off input current Low Line to High Line at Full Load Isolation voltage Max. 12 24 48 Positive logic Voltage accuracy Line regulation Over load protection Short circuit protection Typ. 9 18 36 20 OUTPUT SPECIFICATIONS Parameter Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over voltage protection Min. Typ. Max. Unit VDC G2 pF 400 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 2.064 x 106 hrs 1200 440 VER: 20 2014/05/27 FKC12 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions 2.5Vout, 3.3Vout, ±5Vout Operating ambient temperature Others Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Typ. Max. -40 +61 -40 +66 +61 +100 +66 +100 100 +125 -55 Natural convection 20 Unit ℃ ℃ ℃ ℃/W MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter EMI(1) ESD Radiated immunity Fast transient (2) Surge (2) Conducted immunity Min. Without derating With derating Without derating With derating Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Level Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggests: Nippon chemi-con KY series, 2201F/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FKC12-48S05 Derating Curve 3 FKC12-48S05 Efficiency vs. Input Voltage 111234567289AB FKC12-48S05 Efficiency vs. Output Load VER: 20 2014/05/27 FKC12 MECHANICAL DRAWING DIP type PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 SMD type NC NC PIN CONNECTION PIN SINGLE 1 Ctrl 2 -Vin 3 -Vin 9 11 Others NC NC NC DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout 16 14 -Vout +Vout Common +Vout DUAL Ctrl -Vin -Vin PIN SINGLE DUAL 23 22 +Vin +Vin +Vin +Vin Common -Vout NC 16 14 -Vout +Vout Common +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 111234567289AB VER: 20 2014/05/27