Preview only show first 10 pages with watermark. For full document please download

Datasheet For Gptp3150 By Green Power Solutions

   EMBED


Share

Transcript

Green Power Solutions srl Via Venezia 34D - 10088 Volpiano (TO), Italy Phone: +39-011-988 2251 Fax: +39-011-988 1358 Web: www.gpsemi.it e-mail: [email protected] GPTP3150 PHASE CONTROLLED SCR High reliability operation DC power supply AC drives VOLTAGE UP TO 2400 V AVERAGE CURRENT 1500 A SURGE CURRENT BLOCKING CHARACTERISTICS Characteristic Conditions 28 kA Value VRRM Repetitive peak reverse voltage 2400 V VRSM Non-repetitive peak reverse voltage 2500 V VDRM Repetitive peak off-state voltage IDRM IRRM Repetitive peak off-state current, max. Repetitive peak reverse current, max. 2400 V VDRM, single phase, half wave, Tj = Tjmax VRRM, single phase, half wave, Tj = Tjmax 70 mA 70 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 1500 A IT(AV) Average on-state current Sine wave,180° conduction, Tc = 85 °C Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax 1280 A ITSM Surge on-state current I²t VT(TO) I² t for fusing coordination Threshold voltage Tj = Tjmax rT On-state slope resistance Tj = Tjmax 0,30 mΩ VTM Peak on-state voltage, max 1,80 V IH IL Holding current, max Latching current, typ On-state current IT = 2900 A , Tj = 25 °C Tj = 25 °C Tj = 25 °C 28 kA 3920 kA²s 1,00 V 300 mA 700 mA TRIGGERING CHARACTERISTICS Gate trigger voltage Tj = 25 °C, V D = 5 V IGT Gate trigger current Tj = 25 °C, V D = 5 V 300 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0,25 V Pulse width 100 µs 150 W VGT 3,5 V PGM Peak gate power dissipation PG(AV) Average gate power dissipation IFGM Peak gate current 10 A VFGM VRGM Peak gate voltage (forward) Peak gate voltage (reverse) 30 V 5 V 2 W SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Tj = Tjmax 200 A/µs dV/dt tq Critical rate of rise of off-state voltage Tj = Tjmax 1000 V/µs Turn-off time, typ Tj = Tjmax, IT = 1000 A, di/dt = -20 A/µs 350 µs VR = 50 V, VD = 67% VDRM, dV/dt = 20 V/µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0,016 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0,006 °C/W Tjmax Max operating junction temperature Tstg Storage temperature F Clamping force ± 10% Mass Document GPTP3150T001 125 °C -40 / 125 °C 24,5 kN 520 g GPTP3150 PHASE CONTROLLED SCR Current rating - sine wave Power loss - sine wave 3500 180° 120 3000 110 90° 90 80 30° 2000 1500 1000 70 60 500 30° 60° 50 0 400 90° 800 120° 1200 180° 0 1600 0 400 IT [A] 800 1200 1600 IT[A] Maximum surge current d.s. cooled On-state voltage drop 30 3500 3500 3000 3000 2500 2500 25 20 [A] ITIT[A] ITSM [A] 120° 60° 2500 100 PF [W] Heatsink temperature [°C] 130 15 10 Tj=Tjmax Tj=Tjmax 2000 2000 1500 1500 1000 1000 500 500 5 0 1 10 100 00 0 0,5 0,5 1 1 1,5 1,5 VTT [V] [V] V Number of cycle current pulses [n] ZTH(j-c) [°C / W] Thermal impedance (j-c) 0,018 0,016 0,014 0,012 0,01 0,008 0,006 0,004 0,002 0 0,001 0,01 0,1 1 10 100 Time [s] dimensions mm In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GPTP3150T001 2