Transcript
Double Balanced Mixer
Model MC53SMC-13
Communications Band Electrical Specifications
RF 4.0 to 8.0 GHz
:
(1)
Conditions Parameter SSB Conversion loss:(2) (3)
RF (GHz) 4.0-8.0 4.0-8.0 4.0-8.0
LO (GHz) 4.0-8.0 4.0-8.0 4.0-8.0
IF (MHz) DC-1000 DC-3000 DC-4000
Specifications Min
Typical 5.5 dB 6.5 dB 7.5 dB
25 dB
35 dB 19 dB 25 dB
Isolation LO to RF: LO to IF: RF to IF:
4.0-8.0
Input 1 dB Compression Point:
4.0-8.0
4.0-8.0
DC-4000
+2 dBm
Input Third Order Intercept Point:
4.0-8.0
4.0-8.0
DC-4000
+12 dBm
4.0-8.0
4.0-8.0
DC-4000
+7 dBm
LO Power:
(4)
4.0-8.0 4.0-8.0
Max 7.0 dB 8.0 dB 9.0 dB
Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss if IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
Typical Performance at +25º C Relative Conversion Loss VS. IF Frequency 0
(dB)
1
2
Outline: SMCKR
Rel CL
3
4
DC
Frequency (GHz)
4.0
LO to RF Isolation -10
(dB)
-20
L to R
-30
-40
-50
4.0
Frequency (GHz)
8.0
LO to IF Isolation -10
(dB)
-20
L to I
-30
-40
-50
4.0
Frequency (GHz)
8.0
Conversion Loss (1 GHz) 8 7
(dB)
6 CL
5 4
All dimensions are in inches and [mm].
3 2
4.0
Frequency (GHz)
8.0
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532
Rev. 4/26/07
www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001
