Preview only show first 10 pages with watermark. For full document please download

Datasheet For Q-ms 10 (3 Phase) By Power Innovations Inc.

   EMBED

Share

Transcript

Q-MS 10 Output Capacity (VA) Capacity (Watts) Current (peak amp) 120/220 (max amps) Nominal voltage range Frequency Waveform Outlets 10000 8000 72 / 36 120 / 220 VAC (dual outputs is available as required) 50 / 60 / 400 Hz ± .1% High resolution, pure sine wave Terminal Block Input Current (peak amps) Power factor Frequency 86 / 42.8 0.8 50 / 60 / 400 Hz ± 5% General UPQ power conditioning topology Five (5) stages of isolation and conversion, High frequency, true on-line digital sine wave Desktop Configuration Rack Mount Configuration CE approved No Yes Yes Voltage Regulation Input voltage range: single phase Input voltage range: three phase Full load without using battery Half load without using battery Output voltage regulation 176 to 297 VAC 176 to 264 VAC 3w / 285 to 494 VAC 4w ± 20% ± 25% ± 1% Isolation Common-mode noise rejection Normal-mode noise rejection Yes Yes Suppression IEEE 587/ANSI 62.41 (North America) IEEE 587/ANSI 62.41 (International) Joules (energy absorption) Peak surge current (amp) Multi-stage protection Conditioning Yes Yes 2000 20000 Yes Yes Q-MS 10 Page 1 Output frequency regulation Input frequency range 50 / 60 Hz 50 / 60 Hz ± 0.5% Hz High Frequency On-Line Inverter Inverter driver frequency Overload capacity Crest Factor Transfer Time Efficiency UPQ to bypass/bypass to UPQ ± 0.5% >110% continuous 3:1 Zero 85% Min Zero cross transfer, less than 4 ms (2 mSec. minimum) Battery Full load run time Half load run time Extended battery packs DC voltage Recharge time Recharge current Hot-swappable Front panel removal > 5 min > 15 min Cabinet 192 VDC 5 to 8 hrs 5A or 10A Yes, with external battery bank No Environment Maximum heat dissipation kW Maximum heat dissipation BTU/hr Operating temperature Humidity Front panel removal 1.5 5120 32° to 104° F (0° to 40° C) 20-90% non-condensing < 45 dBA at 1 meter Physical WxDxH Weight in Ibs/kg (no battery) 19 x 13 x 33 in (480 x 340 x 845 mm) 291 lbs / 132 kg Battery pack A/B (WxDxH) Battery pack A/B weight 9 x 23 x 27 in (230 x 578 x 685 mm) / 19 x 13 x 33in (480 x 340 x 845 mm) 136 lbs (62 kg) / 355 (161 kg) Power Innovations Int’l, Inc. www.power-innovations.com phone: 801-785-4123 fax: 801-785-6999 Q-MS 10 Page 2