Transcript
RS201L THRU RS207L
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * *
Ideal for printed circuit board Surge overload rating: 50 amperes peak Weight: 2.74 grams Mounting position: Any
RS-2L .710 (18.0) .670 (17.0)
MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O * UL listed the recognized component directory,file #94233
.566 (14.4) .528 (13.4)
DIA.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.035 (0.9) .028 (0.7)
.787 (20.0) MIN.
.160 (4.1) .140 (3.6)
.125 (3.2)
Ratings at 25 o C ambient temperature unless otherwise specified.
.528 (13.4) .488 (12.4)
AC
.260 (6.6) .240 (6.1)
resistive or inductive load.
Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL
RS201L
RS202L
RS203L
RS204L
RS205L
RS206L
RS207L
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
RATINGS
Maximum Average Forward Rectified Current o at T A = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Current Squarad Time Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 3) Operating and Storage Temperature Range
UNITS
IO
2.0
Amps
IFSM
60
Amps
2
I t R q JC
14.9
A 2 /Sec
R q JA
40
CJ
15
15
T J, T STG
0
C/ W pF 0
-55 to + 150
C
ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage
o @T A = 25 C
@T A = 100 o C
SYMBOL VF IR
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 3. Measureed at 1MHz and applied reverse voltage of 4.0 volts.
RS201L
RS202L
RS203L
RS204L 1.1
RS205L
RS206L
RS207L
UNITS Volts
5.0 100
mAmps 2009-11 REV:O
AVERAGE FORWARD CURRENT, (A)
2.0 1.6 1.2
0.8 Single Phase Half Wave 60 Hz Inductive or Resistive Load
0.4 0 0
50
100
150
INSTANTANEOUS FORWARD CURRENT, (A)
RATING AND CHARACTERISTICS CURVES ( RS201L THRU RS207L ) 4
1.0 0.4
0.1 0.04
0.01
TA = 25 OC Pulse Width = 300mS 1% Duty Cycle
0
O
1000
TA = 100 OC
100
10 TA = 25 OC
1.0
0.1
0
20
40
60
80
100
0.5
1.0
1.5
2.0
2.5
3.0
3.5
INSTANTANEOUS FORWARD VOLTAGE, (V)
PEAK FORWARD SURGE CURRENT, (A)
INSTANTANEOUS REVERSE CURRENT, (mA)
AMBIENT TEMPERATURE, ( C)
120
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
140
60 8.3mS Single Half Sine-Wave JEDEC Method
50 40 30 20 10 0 1
2
5
10
20
NUMBER OF CYCLES AT 60Hz
50
100
Marking Description
Rectron Logo
Part No.
RS20XL
Voltage-code UL Logo Year – code (Y:Last digit of year)
VYWW +
AC
-
Week – code (WW:01~52)
1-------50V 2-------100V 3-------200V 4-------400V
5-------600V 6-------800V 7-------1000V
PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE
PACKING CODE
RS-2L
-B
EA PER BOX 400
INNER BOX SIZE
CARTON SIZE
(mm)
(mm)
213*162*52
450*220*255
EA PER CARTON 4,000
GROSS WEIGHT(Kg) 13.65
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
