Transcript
1700 & 1750 Toggle Switches 16A 250Vac Single and Double Pole ៉ Nylon toggle switches
Approvals and specifications 16(4)A 250Vac T85
៉ Ratings up to 20A,
250V ac UL 20A 250Vac Non Ind (Single pole) UL 16A 250Vac Non Ind (Double pole) UL CSA (2 pos types) 250Vac 1hp, 125Vac 1/2hp UL CSA (3 pos types) 250Vac 1/2hp, 125Vac 1/4hp CSA 16A 250Vac Non Ind UL 85˚C, file E45221, CSA file LR10990 UL and CSA N/A on momentary types
៉ Single and double
pole ៉ Wide choice of
terminals ៉ Choice of circuit
options including 3 position
Selective “A, B, C” and “OFF, A, A+B” circuits at 5 amp also available. 3mm contact gap except where marked µ. Technical data on pages 4 & 5.
៉ Flat & round actuator
toggle switches
options
C 1750 H O - - TERMINAL FUNCTION ACTUATOR BODY OPTIONS
TERMINAL
FUNCTION Single pole
C 9.1
6.3 x 0.8
1 2
ACTUATOR Double pole
3
1700
1
2
3
4
5
6
H 16.4
1750 ON - OFF
H 9.1
1710 µ
1760 µ
4.8 x 0.8 ON - ON
K
R 9.1 2.0
17.5
1720 µ
1.2
1770 µ
13.8
ON - OFF - ON
2.8 x 0.8
T 7.0
1721 µ ON - OFF -ON (momentary 1 side)
Ø2.1
Solder
X
1722 µ 9.1 4.0
ON - OFF - ON (momentary 2 sides)
PCB 0.8 Sq
36 tel: +44 (0)20 8979 3232 • Arcolectric • email:
[email protected]
The switch is on between centre terminals (2 & 5) and the terminals over which the lever is positioned.
C1700H --
C1760R --
C1750H --
toggle switches
C1700R --
BODY
DIMENSIONS (mm)
OPTIONS
O
Neck Seal A0539MOAAA
Single pole
Material - Nitrile (H & R Actuators) Actuator visible
Thread: 15/32” x 32TPI Keyway
Single Pole (C terminals shown) Thread: 15/32” x 32TPI Keyway
25.5
Cover A1080MOAAA 10.0
12.2
10.0
13.7
Material - EPDM (R Actuator only)
12.2
0FF
Cover A0331MOAAA Material - PVC (R Actuator only)
0N
Optional F00232PAAA plate SP or DP
O Double pole Thread: 15/32” x 32TPI
Covers have internal nylon nuts
Double Pole (C terminals shown)
Keyway
Thread: 15/32” x 32TPI
Fixing nuts (Standard is M506 & T92) T5 Hex brass M506 Hex nylon 10.0
Keyway 30.2
15.2
19.2
3.0 (M506) 2.0 (T5)
25.0
10.0
19.2
1.3 Ø12.7
11.1
T92 Knurled brass slotted
With barrier
1A 2A
3A
1A 2A
3A
4B 5B
6B
4B 5B
6B
2.6
Panel hole (all types) Panel thickness (Max) Both nuts - 3.5mm Less backnut - 6.5mm
Without barrier
16.0
M279 Knurled nylon 16.2 4.1
Optional terminal barrier M441.
37 tel: +44 (0)20 8979 3232 • Arcolectric • email:
[email protected]
