Preview only show first 10 pages with watermark. For full document please download

Datasheet For Xvme-6200-834e

   EMBED


Share

Transcript

Single Board Computers XVME-6200 6U VME Intel® Core™2 Duo Processor Board INTEL CORE DUO PROCESSOR L7400, T7400 DDR-II CHANNEL A FRONT DDR-II CHANNEL B PCI MUX REAR TO P2 PLX8111 TO P2 PCIE x1 (2) USB 2.0 (2) USB 2.0 PCIE x4 USB USB INTEL 82571 PCIE x4 PCIE x4 IDE COMPACT FLASH IDE 1.8” DRIVE FIRMWARE HUB MUX XMC FRONT REAR TO P0 EXPANSION CONNECTOR AUDIO CODEC 6300ESB I/O CONTROLLER HUB LPC BUS GRAPHICS CONTROLLER INTEL E7520 MEMORY CONTROLLER HUB LINE IN/OUT TO REAR SATA PCI X 32 TUNDRA UNI VME CONNECTORS PMC J4 ROUTED TO P2 PCIX CPLD REGISTERS SUPER I/O SCH3114 PARALLEL/ SERIAL PORT Intel® Core™ 2 Duo CPU (up to 2.16GHz) Description The XVME-6200 is a powerful VMEbus PC-compatible processor module that allows users to take advantage of the multiprocessing capability while using standard off-the-shelf PC software, operating systems and VMEbus I/O modules. ◆ FLOPPY DISK 4GB DDR2 ECC SODIMM Key Features & Benefits ■ E7520 and 6300ESB chipset ■ Enhanced Intel® SpeedStep® ■ Headless operation using serial console mode including BIOS setup Parallel printer port (ECP, EPP, and IEEE1284) ■ Keyboard and mouse port via shared PS/2 on ■ Long duration Watchdog timer ■ Front panel I/O includes: - Reset switch and status LEDs - COM1: RS-232 / 422 / 485 port - Dual USB 2.0 ports - Dual 10/100/1000 ports via front panel or optional P0 rear connector - VGA, resolutions up to 1280 x 1024 (optional rear support) ■ Accessories For more information, see www.acromag.com XVME-912 On-board Compact Flash Carrier XVME-913S On-board SSD Kit XVME-990 Rear Transition Module XVME-9076 Dual PMC Carrier Module Backplane I/O includes: - COM2 and COM3: Two RS-232 ports via P2 - Dual USB 2.0 ports via P2 - Line level stereo input and output via P2 ■ Bulletin #8400-687b [email protected] ■ www.acromag.com/xembedded PCIe x4 site ■ XVME-6200-ABCD-X A = CPU 8 - 1.50 GHz Core™ 2 Duo 9 - 2.16 GHz Core™ 2 Duo B = P0 1 - No P0 3 - With P0 C = Memory 4 - 4GB D = Extended Temperature Blank - Standard temperature E - Extended temperature X = Solder L - Lead solder LF - Lead-free solder Contact factory for conformal coating options. ■ ■ ◆ Ordering Information front panel Tel 248-295-0885 PS2 KEYBOARD/ MOUSE ■ 30765 Wixom Rd, Wixom, MI 48393 USA All trademarks are property of their respective owners. Copyright © Acromag, Inc. 2012. Data subject to change without notice. Printed in USA 6/2013. Single Board Computers XVME-6200 6U VME Intel® Core™2 Duo Processor Board Performance Specifications ■ General Processor Intel® Core™ 2 Duo - L7400 1.50GHz - T7400 2.16GHz Memory 4GB DDR2 ECC 400MHz SODIMM Mass Storage - Dual SATA channels via P2 - Floppy drive interface via P2 - EIDE Ultra-DMA 100 interface supports up to three devices: ○ Two channels via P2 for use with mass storage or rear transition modules ○ One channel on-board for optional 1.8” SSD EIDE or Compact Flash carrier Software Support Microsoft Windows® 7, Windows® XP, RTX®, Linux®, and MS-DOS® Vibration (5Hz-2kHz) Operating: 0.015” (380µm) peak-to-peak displacement 2.5 g max acceleration Non-operating: 0.030” (760µm) peak-to-peak displacement 5.0g max acceleration NOTE: If the user backplane is only a 96-pin J1/J2 VMEbus, the I/O functions on the outer rows of the P1/P2 160-pin VMEbus connector are not available. All functions on the P2 and P0 connectors are supported via connectors on the optional XVME-990 rear transition module. ■ Bus Compliance VMEbus Interface - VME-64 support with Tundra Universe IID A32/A24/ A16/D64/D32/D16/D8 (Hardware byte-swapping with D16 or D32), MBLT64 - The optional P0 connector is used to implement Vita 31.1 and PMC rear I/O functions PMC/XMC (PCIe x4) Site - 32/64-bit, 33/66MHz site (IEEE P1386/P1386.1) - Front panel I/O bezel and user I/O on optional P0 rear connector ■ Form Factor 6U VMEbus 9.2” (233mm) x 6.3” (160mm) ■ Environmental Operating temperature Standard models: 0 to 55°C* Extended models: -20 to 65°C* * w/ 200 lfm airflow Storage temperature -40 to 85°C Relative humidity 20 to 80% non-condensing Shock Operating: 30g peak acceleration, 11ms duration Non-operating: 50g peak acceleration, 11ms duration Tel 248-295-0885 Bulletin #8400-687b ■ [email protected] ■ www.acromag.com/xembedded ■ 30765 Wixom Rd, Wixom, MI 48393 USA All trademarks are property of their respective owners. Copyright © Acromag, Inc. 2012. Data subject to change without notice. Printed in USA 6/2013.