Transcript
Specifications
HD/SD Video Switcher
Number of M/Es
1 M/E or 2 M/E
Control Panel
6 types
HVS-390HS
“HANABI”
HVS-391OU: 1 M/E 20-button model / HVS-392WOU: 2 M/E 28-button model / HVS-392OU: 2 M/E 20-button model / HVS-392ROU: 2 M/E 12-button rack size model HVS-30OU: 1 M/E 12-button model / HVS-30RU: Remote panel Video Formats
1080/59.94i, 1080/50i, 1080/29.97PsF, 1080/25PsF, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p, 525/60 (NTSC), 625/50 (PAL)
Video Input
HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75Ω BNC × 16 * Frame synchronizer on each input
Video Input (optional) HVS-30HSDI
HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75Ω BNC × 4
HVS-30HSAI
HD analog component, SD analog component, Analog composite
HVS-30PCIN
DVI-D: XGA to WUXGA (1080i), XGA to WXGA (720p), VGA to XGA (SD) (HDCP incompatible) RGB: XGA to WUXGA (1080i), XGA to WXGA (720p), VGA to XGA (SD)
Number of Inputs
Standard: 16 (SDI), Max.: 24 (with HSDI × 2 or HSDI-A × 2)
Video Output
HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75Ω BNC × 8 (PGM × 2, AUX × 6), HDMI (AUX) × 1 (HDCP, AUDIO incompatible)
Video Output (optional) HVS-30HSDO
HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75Ω BNC × 3
HVS-30HSAO
HD analog component, SD analog component, Analog composite
HVS-30PCO
DVI-D: SXGA to WUXGA/HDTV (1080i), SXGA/WXGA (720p), SVGA (SD) (HDCP incompatible)
HD/SD Video Switcher
HVS-390HS
RGB: SXGA to WUXGA (1080i), SXGA/WXGA (720p), SVGA (SD), YPbPr: HDTV (1080i) Number of Outputs
Standard: 9 (SDI × 8, HDMI × 1), Max.: 13 (with 2 output cards)
AUX Outputs
Standard: 6, Max.: 8 * Crossfade switching available on each AUX output
Signal Processing
4:2:2 Digital component
Quantization
HD/SD-SDI: 10-bit
Genlock Input
BB: NTSC 0.429 Vp-p/PAL 0.45 Vp-p or Tri-level Sync: 0.6 Vp-p, 75Ω BNC × 1, loop-through (Terminate with 75Ω terminator, if unused.)
System Phase Adjust
Horizontal: -1/2H to +1/2H
Genlock Output
BB: NTSC 0.429 Vp-p/PAL 0.45 Vp-p or Tri-level Sync: 0.6 Vp-p, 75Ω BNC × 1
I/O Delay
HD: 1 H, SD: 1.7 H (minimum delay) 1 to 2 frames + minimum delay (when FS or up-resize engine used) 2 to 3 frames + minimum delay (when FS or up-resize engine plus DVE used) 3 to 4 frames + minimum delay (when FS or up-resize engine plus output resize engine and DVE used)
Interfaces
EDITOR: 9-pin D-sub (female) × 1 (inch screw) RS-422: 9-pin D-sub (female) × 6 (inch screw) GPI IN: 15-pin D-sub (female) × 1 (inch screw) 10 inputs GPI/TALLY OUT: 25-pin D-sub (female) × 1 (inch screw) 20 outputs ARCNET: 75Ω BNC × 1, loop-through (Terminate with 75Ω terminator, if unused.) Ethernet: 100BASE-TX/1000BASE-T RJ-45 × 1
Temperature / Humidity
0ºC to 40ºC / 30% to 90% (no condensation)
Power
100 V AC to 240 V AC ±10%, 50/60 Hz
Consumption
HVS-390HS: Max. 510 W (100 V to 120 V AC), 460 W (220 V to 240 V AC) HVS-391OU: Max. 32 W (100 V to 120 V AC), 30 W (220 V to 240 V AC) HVS-392WOU: Max. 39 W (100 V to 120 V AC), 37 W (220 V to 240 V AC) HVS-392OU: Max. 43 W (100 V to 120 V AC), 40 W (220 V to 240 V AC) HVS-392ROU: Max. 28 W (100 V to 120 V AC), 26 W (220 V to 240 V AC)
Dimensions/Weight
HVS-390HS: 430 (W) × 450 (D) × 132 (H) mm / Approx. 17 kg (standard), Approx. 20 kg (full option) HVS-391OU: 576 (W) × 279 (D) × 131 (H) mm / Approx. 5.5 kg HVS-392WOU: 800 (W) × 409 (D) × 132.6 (H) mm / Approx. 10.5 kg HVS-392OU: 576 (W) × 409 (D) × 132 (H) mm / Approx. 8.5 kg HVS-392ROU: 430 (W) × 409 (D) × 132 (H) mm / Approx. 7.5 kg
Accessories
Main unit: Operation manual (CD-ROM), Setup guide, AC cord, Rack mount brackets (for main unit) HVS-391OU/392WOU/392OU/392ROU: Operation manual, AC cord, BNC cable (10 m)
Consumables (if used 24 hours
Cooling fan: Replace every 4 years
a day at room temperature)
Power unit: Replace every 5 years
Options
HVS-39EXTME: M/E expansion card (for 1 M/E model)
HVS-39MEM: Video memory expansion card
HVS-30HSDI: HD/SD-SDI input card (w/ up-resize engine)
HVS-30HSAI: Analog input card
HVS-30PCIN: PC input card
HVS-30HSDO: HD/SD-SDI output card
HVS-30HSAO: Analog output card
HVS-30PCO: PC output card
HVS-AUX8/16/32: AUX remote unit (Arcnet type)
HVS-AUX16A/32A/64A: AUX remote unit (Ethernet type)
HVS-AUX8RK/AUXRK: AUX remote extension kit
HVS-TALR20/32: Tally relay unit (20/32 terminal)
HVS-TALOC20/32: Tally open collector unit (20/32 terminal)
HVS-30TALR: Tally relay output card
HVS-39ED: Editor interface software
HVS-39VR: Virtual link software
HVS-39PSM: Redundant power supply unit for main unit
HVS-39PSO: Redundant power supply unit for HVS-391OU/392WOU/392OU/392ROU
HVS-39MB: Memory backup function
Head Office: 3-8-1 Ebisu, Shibuya-ku, Tokyo 150-0013, Japan FOR-A Corporation of America:
11155 Knott Ave., Suite G&H, Cypress, CA 90630, U.S.A.
FOR-A Corporation of America East Coast Office:
Tel : +81 (0)3-3446-3936
Tel: +1-714-894-3311 2 Executive Drive, Suite 670, Fort Lee Executive Park, Fort Lee NJ 07024, U.S.A. FOR-A Corporation of America Distribution & Service Center: Tel: +1-352-371-1505 2400 N.E. Waldo Road, Gainesville, FL 32609, U.S.A. FOR-A Corporation of America Miami Office: Tel: +1-305-931-1700 5200 Blue Lagoon Drive, Suite 760, Miami, FL 33126, U.S.A. FOR-A Corporation of Canada: Tel: +1-416-977-0343 346A Queen Street West, Toronto, Ontario M5V 2A2, CANADA FOR-A Europe S.r.l.: Tel: +39-039-879-778 Via Volturno, 37, 20861 Brugherio MB, Italy
FOR-A UK Limited:
URL: http://www.for-a.com/
Trident Court, 1 Oakcroft Road, Chessington, KT9 1BD, UK
Tel: +44 (0)20-3044-2935
FOR-A Italia S.r.l.:
Tel: +39-039-881-086/103
FOR-A Corporation of Korea:
Tel: +82 (0)2-2637-0761
Via Volturno, 37, 20861, Brugherio MB, Italy
1007, 57-5,Yangsan-ro,Yeongdeungpo-gu, Seoul 150-103, Korea
FOR-A China Limited:
Tel: +86 (0)10-8721-6023 708B Huateng Building, No. 302, 3 District, Jinsong, Chaoyang, Beijing 100021, China FOR-A Middle East-Africa Office: Tel: +971 4 887 6712 Jebel Ali Free Zone, LOB-16, Office 619, P.O. Box 261914, Dubai, U.A.E. Agiv (India) Private Limited (FOR-A India): Tel: +91-22-2405 1258 85, V.N. Purav Marg Sion-Chunabhatti (E) Mumbai - 400 022
ISO 9001 and 14001 certified (Sakura R&D) © 2014 FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company Ltd. Design and specifications subject to change without notice. Printed in Japan. 1409FJ2F
HD/SD Video Switcher
HVS-390HS The HVS-390HS - Why is it all the switcher you’ll ever need?
HVS-390HS
Bus selection buttons One click to select a bus for signal selection Double click for instant menu access
All the switcher you will ever need!
16 dedicated user buttons* The user buttons are programmable to instantly recall almost all switcher functions including: system memories, menus, previews, and any on/off functions
Unparalleled versatility for today’s ever changing world
* HVS-392WOU only
Key/AUX bus sources One click to select source for the above selected bus
The HANABI HVS-390HS is available as a 1M/E or 2M/E switcher. 1M/E versions can be upgraded to 2M/E. The 2M/E is switchable to 2.5M/E, with the additional bus being controlled by either the (included) Web browser control, or an (optional) control panel.
Mnemonic row for sources Source buttons can be programmed using name or custom bitmap image
HVS-392OU 2M/E 20 buttons
HVS-30OU 1M/E 12 buttons
AUX control panels Ethernet type
AUX control panels Arcnet type
Hanabi Your guarantee of the highest quality and reliability Industry standard T-Bar/Auto controls can be programmed for function using the next transition area WOU panel offers Mnemonic row for each keyer showing type of key source as well as transition effect selected FOR-A “On-Air” system Assign cut/mix/wipe/DVE function to dedicated transition buttons
HVS-390HS standard features
Extreme choice in control surfaces
HVS-392WOU 2M/E 28 buttons
Smooth, professional joystick with X, Y, and Z axis The high quality joystick is selectable for fine or normal adjustment of DVE X/Y/Z position as well as Rotation/angle and Default
HVS-392ROU 2M/E 12 buttons
HVS-391OU 1M/E 20 buttons
HVS-30RU remote 12 buttons
HVS-390HS web browser
With the HVS-390HS, there is no compromise offering up to 3 different control panels and up to 10 remote AUX control panels that can be used all at the same time! You can choose what size or type of control you prefer and what fits your environment. From the 19” rack mount 12 button panels (1M/E or 2M/E), all the way up to the operator designed 2M/E 28 button panel. As well as traditional control panels, there is also the choice of simple remote panel, included Web browser control, and our range of AUX control panels. All control choices are easy to operate, for safe, reliable and repeatable LIVE operation!
• 4 × Keyers on each M/E, including 2 high quality Chroma keyers, can be used as keyers and/or Picture in Picture • Freely assign up to 4 × keyers to an AUX output or M/E output (2 from M/E 1, 2 from M/E 2) • All keyers include DVE with resize and perspective/tilt, etc. (2.5D) • 2 × 3D DVEs on each M/E for background and keyer transitions • CG Wipe engine on each M/E offering animated wipe/mix transitions • ‘Next transition’ including direction for all keyers and background on each M/E, as well as FOR-A’s On-Air programmable transition section • Included Web Browser GUI gives total control and set up from a connected device such as PC, Mac, or Tablet, etc. • FTP access for stills and clips, plus built-in USB for stills • Increase the number of stills by using spare inputs as extra still stores • The Web Browser provides an easy way to edit: Macros, Event Memories and key-frame sequences • Industry leading color correction with 2 per M/E, assignable for inputs or entire bus • 4 clip store capability with up to 60 frames in each clip store (HVS-39MEM option provides 120 frames) • Option to save stills and clips to internal memory (HVS-39MB) • Redundant PSU for both Main and Control Panel available, hot-swappable from the front of the MU • Safe-area generator and audio monitoring are selectable and adjustable per window on internal multi-viewer layouts • 2 x Multi-viewer outputs in HD mode, each with selectable layouts • Standard interface for multiple external device control, including audio mixers, routers, and VTR/VDCP units via RS-422 • Individually switchable frame synchronizer on each input • 4 × Upconverters are standard—expandable to 12 • 16 inputs are standard, expandable to 24 with optional HD/SD-SDI, DVI, VGA, composite or component cards • 8 outputs plus 1 × HDMI output are standard, expandable to 13 with optional HD/SD-SDI, DVI, VGA, composite or component cards • Depending on configuration and usage, HVS-390HS has a minimum delay of 1H in HD • Up to 100 m BNC cable can be used to connect Mainframe and control panel • Dedicated Black Burst or Tri-Level sync output
HD/SD Video Switcher
HVS-390HS The HVS-390HS - Why is it all the switcher you’ll ever need? Unparalleled broadcast reliability and performance Advanced AUX- Virtual 6M/E
While the HVS-390HS has a full powered primary Mix Effects (M/E), FOR-A offers the first switcher system to use Advanced AUX technology. Operators and technical staff will appreciate the capabilities of a virtual 6M/E switcher. With Advanced AUX technology any AUX HD/SD HANABI VIDEO SWITCHER HD/SD HANABI VIDEO SWITCHER HD/SD HANABI VIDEO SWITCHER bus can be used like never before… HVS-390HS HVS-390HS HVS-390HS and AUX output can cut, mix, wipe, key and move graphics with a DVE.
A dozen DVE channels
The HVS-390HS has 8 channels of 2.5D and 4 channels of 3D DVE. Twelve channels of DVE means you don’t need to float DVEs as you should have enough for any production need. All twelve channels are included, no extra charge. Some other suppliers, ask you to pay for enough DVEs or only provide 4.
Powerful outputs! - All at the same time ● 2.5 M/E switcher
With Advanced AUX plus technology, we provide a virtual 6M/E production switcher. You can even also use AUX bus 7 and 8 as a Half M/E (Program/Preset bus) complete with mix transitions and up to 4 DSKs.
MV 1
Monitoring
AUX 3 P-in-P × 1
MV 2 M/E 2 P-in-P × 2
Multi-OU Operation
HVS-390HS Main unit
HVS-392WOU
AUX 5
2.5 M/E
AUX 6
Advanced AUXs
Outputs
HVS-391OU Web browser
● Dual multi-viewer
HVS-AUX16
Two independent multi-viewers are equipped, each capable of displaying 16 windows with safety area marker and audio level meter.
Operation via Web browser
The ability to set up, adjust and operate the HVS-390HS via a Web browser, from a PC, Mac, or tablet device, over Ethernet, is included at ‘no extra charge’. This also allows easy recalling and editing of macros, key-frame sequences and event memories. The Web browser control also displays thumbnails of stills loaded to still stores. This easy to use software control can be used as at secondary operational positions, or as an AUX control for TD or director.
AUX 4 P-in-P × 1
PGM P-in-P × 1
Animation playout (CG wipe): with picture of CG wipe
The HVS-390HS can store and playout from an internal 4 channel media player. Why not free up your external clip player(s) and let the ‘no extra charge’ internal media player replay those animated bugs or integrate your animations into transition opens and closes. Your wipe transitions will really get noticed as the animation becomes part of your A/B wipe.
AUX 2 P-in-P × 1
M/E 1 P-in-P × 2
1 3
1
2 4
Quad-Split
2
1
2
3
4
6 7 8 10 11 12
3
4
5
6
5 9
7
8
9
10
13 14 15 16
10-Split
16-Split
HVS-390HS versatile and reliable main unit A 3U main unit is available with optional redundant power supply. Up to two redundant power supplies can be equipped. It is the same main unit for 1M/E or 2 (2.5)M/E systems, thus providing easy future to upgrade.
HD/SD Video Switcher
HVS-390HS HVS-392ROU External Dimensions 27.4
132.6
MEMORY WIPE
MACRO
EVENT
SEQUENCE
MENU
USER BUTTON
COPY/SWAP
SEQ EDIT
POWER2 F1
F2
F4
F3
KEY2
KEY1
KEY2
M/E1
KEY3
KEY4
1
2
3
4
KEY3
KEY4
PGM
PREV
CLEAN
PGM
5
6
7
8
PREV
CLEAN
MV1
MV2
AUX
4 channels HD/SD-SDI input card. It has a frame synchronizer function and re-size (expansion) function on all inputs so SD images can be processed internally as HD images.
2 channel analog video input card. Either channel can be used as composite or component and the component inputs can be set for SD or HD.
409
PC (DVI/VGA) Input Card
330.7
Analog Video Input Card
1
409
HD/SD-SDI Input Card
HVS-30PCIN
For computer-based applications we have an input card with one DVI-D and one VGA connector, with resolutions ranging from VGA to WUXGA.
M/E2
2
3
4
M/E1
5
6
KEY/AUX
7
M/E2
8
9
COPY
SWAP
NEW
STILL
MATT
FILE
DETTACH
4
5
KEY2
KEY3
DEC KEY1
KEY1
8
INC SETUP
M/E1
1
+/-
M/E2
PLAY
WIPE POS
3
DEL
MENU
10
11
DEF
0
RECALL
STORE
HVS-390HS
M/E2
KEY1
ENTER
PASTE
DIGITAL VIDEO SWITCHER
BKGD
OVWR
KEY2
WIPE
SELECT/KEYPAD
9
ROT
JOYSTICK
ADD
M/E1
COPY
(2D DVE)
POS
FINE
KEY4
2
CUT
KEYER
6
INS
12.7
PAGE
WIPE CHANNEL TRANSITION RATE
12
DVE REV
NOR/REV
PATTERN
KEY1
KEY2
KEY3
KEY4
DIRECTION
BKGD
KEY1
DVE
FADER LIMIT
KEY2
330.7
2 1 USER BUTTON
7
ATTACH
POWER1
STOP
HVS-30HSAI
BLACK TRANS
CONTROL
ALARM
CLEAR
HVS-30HSDI
132
USB MEMORY
12.7
HVS-390HS can accept up to 2 optional input cards and 2 output cards from the following types:
HVS-392WOU External Dimensions
27.4
Dimensions
HVS-390HS input/output options
M/E1
NEXT TRANSITION
DVE
KEY3
1
2
3
4
5
6
7
8
9
10
11
WIPE
MIX
12
TRANSITION TYPE DVE
AUTO
KEY4
CUT ON AIR
DVE REV
NOR/REV
PATTERN
KEY1
KEY2
KEY3
KEY4
DIRECTION
BKGD
FADER LIMIT
KEY1
DVE
KEY2
M/E2
NEXT TRANSITION
DVE
KEY3
1
2
3
4
5
6
7
8
9
10
11
12
MIX
M/E
WIPE
TRANSITION TYPE
DVE
AUTO
CUT
KEY4 ON AIR
CONTROL
TO MU
40
24.4 OFF
40
40
698
HVS-392OU External Dimensions
328
40
HVS-391OU External Dimensions
132
131
MEMORY
USB MEMORY
USB MEMORY MEMORY
Tally relay interface card (18 terminals). Up to 2 cards can be installed (the slot is shared with I/O cards).
WIPE
MACRO
EVENT
SEQUENCE
MENU
USER BUTTON
COPY/SWAP
SEQ EDIT
F1
F2
F4
F3
M/E1
COPY
SWAP
NEW
STILL
MATT
FILE
DETTACH
4
5
KEY2
KEY3
DEC KEY1
KEY1
M/E1
KEY4
KEY3
KEY1
KEY2
M/E2
KEY3
KEY4
1
2
3
4
AUX
5
6
7
8
1
+/-
DEL
ADD
CLEAR
0
RECALL
STORE
4
5
7
6
8
9
10
KEY/AUX
11
12
13
14
15
16
CLEAN
MV1
MV2
17
18
19
20
POS
ROT
MENU
FINE
DEF
JOYSTICK
COPY
PASTE
OVWR
6
7
8
9
10
RS-422
11
12
13
14
15
16
17
18
19
KEY2
KEY2 WIPE CHANNEL
Crosspoint control from HVS
KEY4 DVE
TRANSITION TYPE AUTO
1
2
KEYER
2
3
3
4
4
1
5
2
6
3
7
4
AUX
8
5
6
7
8
PGM
MFR-16RU MFR-16RUD MFR-40RU
PREV
CLEAN
MV1
DEL
CLEAR
0
RECALL
COPY
MV2
9
10
KEY/AUX
11
12
13
14
15
16
17
18
19
9
NEW
KEYER
FILE
6
INS
WIPE POS
(2D DVE)
POS
ROT
FINE
DEF
KEY4
3
MENU
KOYSTICK
ADD
PASTE
STORE
HVS-390HS
DIGITAL VIDEO SWITCHER
KEY1
ENTER OVWR
KEY2
WIPE
WIPE CHANNEL TRANSITION RATE
20
DVE NOR/REV
REV
DIRECTION
KEY1
PATTERN
KEY1
KEY2
KEY3
KEY4
NEXT TRANSITION
PGM
DVE FADER LIMIT
KEY2
DVE
KEY3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
MIX
WIPE
TRANSITION TYPE DVE
PST
AUTO
KEY4
CUT ON AIR
NOR/REV
BKGD
KEY1
576
KEY1
PATTERN
DVE
KEY2
KEY3
NEXT TRANSITION
KEY2
KEY4 DVE
KEY3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
MIX
M/E
WIPE
TRANSITION TYPE
DVE
CUT
KEY4 ON AIR
PREV
24.4
REF
MFR-TALM
CUT
SELECT/KEYPAD
DVE REV
DIRECTION
AUX control from MFR
Tally signal
MFR-GPI
2
PLAY
ON AIR
AUTO
MFR-5000
5 KEY3
KEY4
CUT
FADER LIMIT
HVS-390HS
4 KEY2
1
+/-
F4
F3
BKGD
KEY2
576
POWER1 ON
RATING LABEL CONTROL
TO MU
(SERVICE)
POWER
POWER2
AC100 - 240V 50/60Hz IN
GPI/TALLY OUT OFF
40
MV monitor 1 POWER1 ON
RATING LABEL CONTROL
TO MU
474
POWER2
POWER
AC100 - 240V 50/60Hz IN
GPI/TALLY OUT
(SERVICE)
OFF
DVI Tally signal/ source name from MFR
MV monitor 2
474
40
40
HVS-390HS External Dimensions
MV-3200
HVS-390HS
MV monitor 3
DIGITAL VIDEO SWITCHER
57
MFR-39RU MV monitor 4
POWER 1 ALARM
POWER 2 ALARM
POWER 1
System related FOR-A products
POWER 2
ON
ON
OFF
OFF
37.5
GUI
450
430 480
HVS-390HS Rear View 1
2
3
4
5
6
7
8
1
2
1
2
3
4
5
6
SDI OUTPUT
1
OPTION SLOT
MBP–100MP Multi-format File Base server
VTW-350HS Character Generator
SDI INPUT
LAN 9
AUX
EDITOR
MV-series Multi-viewers
F2
M/E2
MFR-18RU
MFR-series Routing Switcher
F1
KEY1
DVE
FADER LIMIT
WIPE
MIX
20
PGM
SDI
POWER2
8
SWAP
MATT
STOP
1
M/E2
DVE
REF
SEQ EDIT
7
COPY
STILL
BKGD
KEY3
5
COPY/SWAP
BLACK TRANS
DVE PATTERN
KEY1
KEY3
4
2 1 USER BUTTON
TRANSITION RATE
NOR/REV
NEXT TRANSITION
3
USER BUTTON
INC
KEY1
PAGE
HVS-390HS
M/E1
2
MENU
SETUP
DEC
POWER1
KEY1
ENTER
WIPE
SELECT/KEYPAD
SEQUENCE
DETTACH
ALARM
DIGITAL VIDEO SWITCHER
BKGD
M/E1
DIRECTION
Ethernet Hub for PC-LAN
d VR-Link optional software for FOR-A for current or future virtual studio use.
3
PREV
M/E2
BKGD
1
Ethernet Hub for MFR-LAN
c Media player interfaces can use VDCP (video disk communications protocol) RS-422 based VTR style control.
2
PGM
REV
Source name
b Integrate an audio mixer with the HVS-390HS using ESAM II (edit suite audio mixer) industry standard protocol.
1
CLEAN
3
CUT
EVENT
27.2
a When integrating a router and switcher, FOR-A’s system incorporates pass through for processing of tally information and source names.
From system
409
SDI
PREV
M/E1
WIPE POS
(2D DVE)
KEY4
2
PLAY
STOP
PGM
KEYER
10
11
12
13
HDMI 2
14
15
GPI IN
3
2
132
Facility Integration:
KEY2
M/E2
6
INS
MACRO
ATTACH
9
INC SETUP
279
POWER2
8
12.7
PAGE
330.7
2 1 USER BUTTON
7
ATTACH
POWER1
WIPE
CONTROL
BLACK TRANS
CONTROL
ALARM
POWER2
AC100 - 240V 50/60Hz IN
GPI/TALLY OUT
(SERVICE)
OFF
For computer-based applications we have an output card with one DVI-D and one VGA connector, with resolutions ranging from SVGA to WUXGA.
POWER
ON
RATING LABEL
AC100-240V 50/60Hz IN
GPI/TALLY OUT
(SERVICE)
27.4
2 channel analog video output card. Outputs can be set-up as 1 component and 1 composite or as 2 component. The component outputs can be set as SD or HD.
TO MU
POWER1
POWER 2 POWER
ON
RATING LABEL CONTROL
37.5
Tally Interface Card
POWER 1
PC (DVI/VGA) Output Card
12.7
2 channel HD/SD-SDI output card. A third dedicated down-converted output is provided for simultaneous output of HD and SD.
HVS-30TALR
HVS-30PCO
Analog Video Output Card
208.3
HVS-30HSAO
HD/SD-SDI Output Card
27.4
HVS-30HSDO
430
24.4
800
16
REF IN
GPI/TALLY OUT
4
5
AC100-240V 50/60Hz IN
OPTION SLOT C
B
D
REF OUT
TO OU
6
RS-422
A
LAN
GENLOCK
1
AC100-240V 50/60Hz IN
40
