Transcript
S3D Processor / Color Equalizer
CEQ-100HS Color matching is normally carried out manually. The CEQ-100HS allows extremely precise color matching by using automatic color calibration by means of image recognition technology. Stereoscopic 3D feature - Automatic offset of the vertical difference - Calculation and adjustment of Parallax - Auto color correction without Color Chart - Reverse left and right eye views - Stereoscopic 3D monitoring - Embedded audio pass through: Audio embedded in the L or R video input can be output from the 3D monitor output. - Two frame synchronizer channels: They ensure phase alignment of two 3D image signals. Automatic Color calibration Independent color calibration and/or color correction for 2 out of 4 video inputs Store and recall color calibration/correction parameters Internal Standard Color chart for color calibration and standard color bars generator Color correction using Color Matrix Easy-operation by GUI
Color Calibration for Camera Captured Monitor
Color Calibration for Multi Camera Shooting
Generate the base color chart for color calibration CEQ-100HS
Studio Camera
Studio Camera
Video Switcher Monitor in the Studio
Master Monitor (Camera Output)
CEQ-100HS
Adjust the video source colors in the captured monitors to have correct colors on the master monitor.
Studio Camera
Stereoscopic Application Stereoscopic Camera
Left image (Reflected)
3D RIG (Half-mirror)
N Optical axis correction and parallax adjustment Parallax calculation Automatic Color Calibration without color chart Horizontal/Vertical-Flip Left image 3D monitoring (Side-by-Side, Anaglyph, etc.)
CEQ-100HS Right image (Transmitted)
Right image
The half-mirror 3D RIG splits the signal into two images, and one of the resulting image is reflected. The CEQ-100HS can correct the reflected image, as well as the brightness and color of both split images.
Specifications Video Formats
Video Inputs
Genlock Input Video Outputs
Signal Processing Quantizing I/O delay Input phase adjustment Interfaces
Temperature / Humidity Power Consumption Dimensions / Weight Consumables (if used 24 hours a day at normal temperature) Option
HD-SDI: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p SD-SDI: 525/60, 625/50 (Selected in the menu) HD-SDI: 1.5 Gbps SD-SDI: 270 Mbps 75Ω BNC x 4 BB: NTSC: 0.429 Vp-p/PAL: 0.45 Vp-p or Tri-sync: ±0.3 Vp-p 75Ω BNC x 1, loop-through (Terminate with 75Ω terminator, if unused.) HD-SDI: 1.5 Gbps SD-SDI: 270 Mbps 75Ω BNC x 4 (2 x 2) 4:2:2 (YPBPR), Internal processing: 4:4:4 (RGB) 10-bit FS mode: 1 frame, LS mode: 1 line (when the input phase is the same as the genlock phase) FS mode: approx. 1 frame, LS mode: approx. ± 0.5 H VGA: Output resolution: SXGA (1280 x 1024), 15-pin mini D-sub (female) x 1 USB: USB 2.0, Series-A type connector x 4 (2 ports on front and 2 ports on rear) GPI/ALARM: 15-pin D-sub (female) x 1 ALARM: power and fan alarm outputs (make relay contact) LAN1/LAN2: (Not used) REMOTE: (Not used) RS-232C: (Not used) 10°C to 40°C / 20% to 80% (no condensation) 100 V AC to 240 V AC ±10%, 50/60 Hz 100 VA (99 W) at 100 V AC, 101 VA (89 W) at 200 V AC 430 (W) x 44 (H) x 500 (D) mm, EIA 1 RU / 9 kg Cooling fan: Replace every 3 years. Power: Replace every 5 years. Battery: Replace every 5 years. Single or dual mount rack bracket, Rack mount brackets
Rear Panel RS-232C
SER.NO.
AC100-240V 50/60Hz IN
GPI/ALARM GENLOCK IN 1
1
2
2
OUTPUT
3
3
REMOTE
4
4
INPUT
VGA
LAN2
LAN1
USB4
USB3
External Dimensions 2.3
430 CEQ-100HS
COLOR EQUALIZER FAN
USB 1
USB 2
POWER
OFF
44
POWER ACT
ON RESET
480
FOR-A COMPANY LIMITED
Head Office : 3-8-1 Ebisu, Shibuya-ku, Tokyo 150-0013, Japan FOR-A Corporation of America Corporate Office : 11155 Knott Ave., Suite G&H, Cypress, CA 90630, USA FOR-A Corporation of America East Coast Office : 2 Executive Drive, Suite 670, Fort Lee Executive Park, Fort Lee NJ 07024, USA FOR-A Corporation of America Distribution & Service Center : 2400 N.E. Waldo Road, Gainesville, FL 32609, USA FOR-A Corporation of America Miami Office : 5200 Blue lagoon Drive, Suite 760, Miami, FL 33126, USA FOR-A Corporation of Canada : 346A Queen Street West, Toronto, Ontario M5V 2A2, CANADA FOR-A UK Limited : UNIT C71, Barwell Business Park, Leatherhead Road, Chessington Surrey, KT9 2NY, UK FOR-A Italia S.r.l. : Via Volturno, 37, 20047, Brugherio MB, ITALY FOR-A Corporation of Korea : 801 Dangsan Bld., 53-1 Dangsan-dong, Youngdeungpo-gu, Seoul 150-800, KOREA FOR-A China Limited : 708B Huateng Building, No. 302, 3 District, Jinsong, Chaoyang, Beijing 100021, CHINA
500
Homepage: http://www.for-a.com/
Tel : +81 (0)3-3446-3936 Tel: +1 714-894-3311 Tel: +1 201-944-1120 Tel: +1 352-371-1505 Tel: +1-305-931-1700 Tel: +1 416-977-0343 Tel: +44 (0)20-8391-7979 Tel: +39 039-881-086/103 Tel: +82 (0)2-2637-0761 Tel: +86-(0)10-8721-6023
Fax : +81 (0)3-3446-1470 Fax: +1 714-894-5399 Fax: +1 201-944-1132 Fax: +1 352-378-5320 Fax: +1-305-264-7890 Fax: +1 416-977-0657 Fax: +44 (0)20-8391-7978 Fax: +39 039-878-140 Fax: +82 (0)2-2637-0760 Fax: +86-(0)10-8721-6033
ISO 9001 and 14001 certified (Sakura R&D) © 2011 FOR-A Company Ltd. FOR-A is a registered trademark of FOR-A Company Ltd. Design and specifications subject to change without notice. Printed in Japan. 1108FJ2B
