Transcript
Layer 2 Din-Rail Managed IEC61850 Industrial Ethernet Switches
PTC1000
PTP (Precision Time Protocol) Clock Converter Support IEEE1588v2, the synchronization accuracy reaches ±100ns Support ITU-T.G.8261/G.8262 SyncE, the synchronization accuracy can reach ±50ns with SyncE enabled Support 1 100Base-FX SC/ST/FC or 1 10/100Base-TX RJ45 input Support 1 PPS output, 2 IRIG-B TTL outputs, 2 IRIG-B AM modulation outputs and 1 IRIG-B RS422 output Support both vertical and horizontal Din-Rail installation Exceeds IEC61850-3 & IEEE1613 CE, FCC certificates
Overview PTC1000 Clock Converter realizes the con conversion from PTP to IRIG-B and PPS (Pulse Per Second). This allows the ind industrial devices that are equipped with IRIG-B clock interfaces and PPS interface to conveniently access PTP network. This achieves the normalization of network clocks and reaches high precision synchronization in the industrial control system. The PTC1000 supports Din-Rail installation. It provides one 100M fiber/copper optional port, one PPS port, two IRIG-B (DC) ports and two IRIG-B (AC) ports in the front panel.
Technical Specifications Standard IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE1588v2, ITU-G.8261/G.8262
Protocols Telnet,HTTP,SNMPv1/v2,LLDP; PTP,RTC; FTP
Interface
Features & Benefits 1. Network Management and Monitoring: supports CLI, Telnet, WEB management, Kyvision centralized management, SNMPv1/v2, LLDP 2. Synchronization Protocol: supports IEEE1588v2, ITU-G.8261/G.8262 SyncE 3. Device Management: supports FTP upgrade
Fast Ethernet Port: 1 100Base-FX, SM/MM port, FC/SC/ST connector or 1 10/100Base-TX RJ45 port Console Port: RS232 (RJ45 connector) Alarm Contact: 3-pin 5.08mm-spacing plug-in terminal block, 250VAC/220VDC Max, 2A Max, 60W Max Clock Interface: BNC interface, 2-pin 5.08 mm-spacing pluggable terminal blocks, 4-pin 5.08mm-spacing pluggable terminal block
Clock Signal PPS: TTL level +5V, 50Ω, Rising edge based, pulse width 20ms-200ms, stepped by 20ms (adjustable in software) IRIG-B DC: TTL level +5V, 600Ω, Rising edge based, Mark-Space Ratio 50% IRIB-B AM: Vp-p, 2V-10V (adjustable in software, default Vp-p: 4.5V), 600Ω, Modulation Ratio 3:1, 4:1, 5:1, 6:1 (optional, default modulation ratio is 3:1)
LED LEDs on Front Panel Running LED: Run Alarm LED: Alarm Power LED: PWR1, PWR2 Interface LED: Link/ACT, Speed PTP Sync LED: Sync
140
[email protected] / www.kyland.com
Reset Button
Warranty
Reboot and restore default configuration
5 years
Transmission Distance
Approvals
Twisted Pair: 100m (Standard CAT5, CAT5e network cable) Multi Mode Fiber: 1310nm, 5km (100M) Single Mode Fiber: 1310nm, 40km/60km (100M) 1550nm, 80km (100M)
CE, FCC
Power Requirements Power Input: 24DC (18-36VDC), 220AC/DCW(85-264VAC/77-300VDC) Power Terminal: 5-pin 5.08mm-spacing plug-in terminal block Power Consumption: <4W Overload Protection: Support Reverse Connection Protection: Support Redundancy Protection: Support
Physical Characteristics Housing: Aluminum, fanless Protection Class: IP40 Dimensions (W×H×D): 62.4×139×119.5 mm (2.45×5.47×4.70 in.) Weight: <0.75kg (1.653 pound) Mounting: Vertical or Horizontal Din-Rail
Environmental Limits Operating Temperature: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing)
MTBF 350,000hrs
3 L2 Din Rail
Industrial Standard EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A EMS: IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air) IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-8 (Power frequency magnetic field): 100A/m (cont.), 1000A/m (1s-3s) IEC61000-4-9 (Pulsed magnetic field): 1000A/m IEC61000-4-10 (Damped oscillation): 100A/m IEC61000-4-12 (Oscillatory wave): 2.5kV/CM, 1kV/DM IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) Machinery: IEC60068-2-6 (Vibration) IEC60068-2-27 (Shock) IEC60068-2-32 (Free Fall) Industry: IEC61000-6-2 Power: IEC61850-3, IEEE1613 Railway: EN50155, EN50121-4 Traffic: NEMA TS-2
Mechanical Drawing
Din Rail Installation
Ordering Information PTC1000 - ______ - ________ - _________ - ___ Ports Distance Connector PS Ports T M S
= 1 10/100Base-TX RJ45 port = 1 100Base-FX multi mode port = 1 100Base-FX single mode port
Distance: Fiber Distance 1310-5 1310-40 1310-60 1550-80
= = = =
1310nm, 5km 1310nm, 40km 1310nm, 60km 1550nm, 80km
Connector: Fiber Connector SC = SC Connector ST = ST Connector FC = FC Connector
PS: Power Supply 24DC = 220AC/DCW =
18-36VDC, dual redundant power inputs 85-264VAC/77-300VDC, single power input
Example Order Codes PTC1000-M-1310-5-SC-220AC/DCW 1 multi mode 1310nm 5km fiber ports with SC connector, 85-264VAC/77-300VDC power supply
[email protected] / www.kyland.com 141
