Transcript
Datasheet
Raisecom Technology Co., Ltd
RCMS2901-120FE Multi-Service FiberMUX RCMS2901-120FE is a stand-alone multi-service FiberMUX, which provides 1 optical fiber for uplink, and 4 E1 plus 4 FE for client access. RCMS2901-120FE can be remotely managed and has local/remote alarm indicators on front panel. Local/remote loop-back function benefits link fault detection and troubleshooting. Power supply and remote device power-off alarm provide a flexible and reliable transmission solution of multiple E1 and Ethernet application. RCMS2901-120FE can work with RCMS2902-120LFE-BL module which
inserted
in
manageable
chassis
RC002/RC001-1M
or
with
RCMS2901-120FE
OPCOM3500E-120FEx8L-GE to implement SNMP management.
Highlights Multi-Service
Provide 4 E1 plus 4 FE on client side
Easy Management
Local managed via CLI menu, remote managed via SNMP on Nview NNM
Typical Application
Raisecom Technology Co., Ltd. Building 2, No. 28 of the Shangdi 6th Street, Haidian District,Beijing 100085, China
Tel: +86 10 8288 3305 Fax: +86 10 8288 3056 Email:
[email protected] Web: http://www.raisecom.com
Copyright@1999-2011 All rights reserved Technical information is subjected to change without notice
Datasheet
Raisecom Technology Co., Ltd
Features Fiber Port
Code: Scrambled NRZ Speed: 150Mbps SC or FC (made to order) connecter ALS supported
E1 port
4 x E1 Transparent 75Ω unbalanced (BNC) E1 local and remote loopback test In-built bit error tester Unframed E1 error statistics: ES, SES, LOF, E-3, E-6 Unused E1 tributary alarm mask provided
FE port
4 x FE, RJ-45 connector 10/100Mbps auto-negotiation, speed and duplex mode configurable MTU: 1916Bytes Flow Control: IEEE 802.3x in full duplex mode Back pressure in half duplex mode Support MDI/MDIX
Fault Pass Through
Close down local FE ports when local/peer fiber port has LOS/LOF, or peer FE ports link down
Remote
Power
Off
Supported
Alarm Rate Limit
Egress/Ingress per port Increments 64Kbps (0-1562*64Kbps, factory default 1562*64Kbps)
Management
CLI-based management through local CONSOLE GUI-based SNMP management on Raisecom NView NNM system
Specifications
Compliances
Fiber Port
1 x SC (or FC made to order)
Standards &
IEEE802.3-2002
E1 Port
4 x BNC connector unbalanced
protocols
IEEE802.3 10BaseT
FE Port
4 x 10/100Base-T
IEEE802.3u 100BaseTX
RJ-45 Connector
IEEE802.3x Flow Control
RS232
ITU-T G.703, G.704, G.823,G.742,G.751
CONSOLE port
Baud Rate: 9600 RJ-45 connector Indicator
PWR for power supply LPR for remote power off LOOP for E1 loopback test
Raisecom Technology Co., Ltd. Building 2, No. 28 of the Shangdi 6th Street, Haidian District,Beijing 100085, China
Tel: +86 10 8288 3305 Fax: +86 10 8288 3056 Email:
[email protected] Web: http://www.raisecom.com
Copyright@1999-2011 All rights reserved Technical information is subjected to change without notice
Datasheet
Raisecom Technology Co., Ltd PAT for in-built bit error tester LOS/LOF/E-3/E-6 for fiber port LOS1-8 for E1 tributaries LNK/ACT and 100M/FDX for FE port DIP switch
SW1: ALS/unused E1 alarm mask/FPT SW2: Bit error test/E1 ISP/Loopback
Dimension
43.6mm(H)×440mm(W)×180mm(D)
Weight
<2.6Kg
Power supply
AC: 220V Voltage:180V~260V DC: -48V Voltage:-36V~-72V DC: +24V Voltage:+18V~+36V
Power consumption
≤ 7W
Working environment
Temp: -5~50 Celsius RH: 10~90% (35 Celsius)
Storage environment
Temp : -40~80 Celsius RH : 5~90% non-condensing
Ordering Information RCMS2901-120FE-X-Y
Multi-service FiberMUX, 4 E1 ports (BNC connector) + 4 10/100Mbps FE ports on client side, 1 fiber port on line side, single AC or DC power supply
Raisecom Technology Co., Ltd. Building 2, No. 28 of the Shangdi 6th Street, Haidian District,Beijing 100085, China
Tel: +86 10 8288 3305 Fax: +86 10 8288 3056 Email:
[email protected] Web: http://www.raisecom.com
Copyright@1999-2011 All rights reserved Technical information is subjected to change without notice
Datasheet
Raisecom Technology Co., Ltd
X – Fiber interface Specification X
Optical connector
Wavelength (nm)
Rx Sensitivity (dBm)
Tx Power (dBm)
Typical Distance (Km)
Attenuation (dB/Km)
M-850
SC
850
<-28
-20~-14
0~2
3
M
SC
1310
<-28
-20~-14
0~2
3
S1
SC
1310
<-34
-15~-8
0~25
0.5
S2
SC
1310
<-34
-5~0
10~60
0.5
S3
SC
1550
<-36
-5~0 (DFB)
15~120
0.25
SS13
SC
1310
<-30
-12~-3
0~25
0.5
SS15
SC
1550
<-30
-5~0
0~25
0.5
SS23
SC
1310
<-32
-12~-3
10~50
0.5
SS25
SC
1550
<-32
-5~0
10~50
0.5
SS34
SC
1490
<-32
-5~0
15~100
0.5
SS35
SC
1550
<-32
-5~0
15~100
0.5
SS1
SC
A: 1310 Tx
<-30
-12~-3
0~25
0.5
B: 1550 Tx
<-30
-5~0
0~25
0.5
A: 1310 Tx
<-32
-12~-3
10~50
0.5
B: 1550 Tx
<-32
-5~0
10~50
0.5
A: 1490 Tx
<-32
-5~0
15~100
0.25
B: 1550 Tx
<-32
-5~0
15~100
0.25
SS2
SS3
SC
SC
M: Multimode dual-strand; M-850nm is made to order. S1, S2, S3: Single-mode dual-strand; SS13, SS15, SS23, SS25, SS34, SS35, SS1, SS2, SS3: Single-mode single-strand.
Y – Power Supply Specification AC
Single 220V/AC power supply
DC
Single -48V/DC power supply
DC(+24V)
Single +24V/DC power supply (made to order)
Raisecom Technology Co., Ltd. Building 2, No. 28 of the Shangdi 6th Street, Haidian District,Beijing 100085, China
Tel: +86 10 8288 3305 Fax: +86 10 8288 3056 Email:
[email protected] Web: http://www.raisecom.com
Copyright@1999-2011 All rights reserved Technical information is subjected to change without notice
