Transcript
MTSS Series – 3.2 X 2.5 Ceramic SMD VCTCXO ¾
Low Profile SMD Device
¾
Hermetically Sealed
¾
Tight Stability Over Temperature
¾
Excellent Phase Noise
ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Stability vs Temperature* Operating Temperature Range Storage Temperature Range Aging Supply Voltage Supply Current Output Type Output Level Output Load
14.400MHZ TO 32.734MHZ (See Frequency Stability vs Temperature Table) (See Frequency Stability vs Temperature Table) -40°C to +85°C
±1.0 per year +2.80VDC
+3.00VDC 2mA max Clipped Sinewave 0.8 Vp-p min 10k Ohms//10pF
Vc = +1.40VDC Vc = +1.5VDC +0.40VDC to +2.40VDC +0.50VDC to +2.50VDC Frequency Tunning Range ±8 ppm to ±15 ppm 100Hz -115dBc/Hz Phase Noise 1kHz -135dBc/Hz 10kHz -145dBc/Hz * Inclusive of Temperature., Load, Voltage and Aging Control Voltage
PART NUMBER GUIDE: MTS
Frequency
S
3.2 x 2.5 Ceramic SMD
Output S = Clipped Sinewave
Supply Voltage 3 = +3.0 VDC 2 = +2.8 VDC
Frequency Stability 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm
Operating Temperature A = 0°C to +50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C
Pin 1 Connection Blank = Ground* V = Voltage Control
Packaging Blank = Bulk T = Tape and Reel
Please Consult with MMD Sales Department for any other Parameters or Options *If no Voltage Control is specified, Pin 1 must be grounded.
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Revision MTSS030508I
FREQUENCY STABILITY vs TEMPERATURE TABLE: Stability 10 Temp ±1.0ppm 0°C TO +50°C 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -30°C TO +80°C -40°C TO +85°C ● = Available
Code A G C D E F
15 ±1.5ppm
20 ±2.0ppm
25 ±2.5ppm ● ● ● ● ●
30 ±3.0ppm ● ● ● ● ●
50 ±5.0ppm ● ● ● ● ●
= Consult with the Manufacturer
MECHANICAL DIMENSIONS: 3.40 [.134] MAX
MARKING
0.90 [.035] MAX
2.65 [.104]
2.24 [.088] 3
4
2
1
0.25 [.010]
0.70 [.028]
0.51 [.020]
2.70 [.106] MAX
0.83 [.033]
1.20 [.047]
0.30 [.012] 0.60 [.024]
0.40 [.016] GROUND PLANE UNDER OSCILLATOR
Dimension in Brackets are in Inches External Bypass Capacitor is Recommended
PIN PIN PIN PIN
PIN CONNECTIONS 1 GRD OR VC (NOTE 1) 2 GND 3 OUTPUT 4 SUPPLY VOLTAGE
NOTE 1 IF VC OPTION IS NOT USED, THIS PIN MUST BE GROUNDED OR FREQUENCY WILL SHIFT.
Recommended Land Pattern
ENVIRONMENT / MECHANICAL: Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test
TAPE and DIMENSIONS:
MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 215 MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A-2
PHASE NOISE:
TAPE AND REEL DIMENSIONS COMING SOON
MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com
[email protected]
Specifications subject to change without notice
Revision MTSS030508I
