Preview only show first 10 pages with watermark. For full document please download

Datasheet Shieldpixx

   EMBED


Share

Transcript

SHIELDPixx TM Shielding enclosure for MRI, MEG, PET, EEG application with video and USB over fiber optic FEATURES MRI SAFE Waveguides SHIELDING WINDOW FOR PROJECTOR WAVEGUIDE FOR FIBER OPTICS INCLUDED POWER ISOLATION STATION Shielded vents DVI DUAL LINK OVER FIBER OPTICS USB 2.0 OVER FIBER OPTICS EASY SETUP Power isolation station USB and DVI over fiber optics TX and RX modules OVERVIEW The SHIELDPixx is a complete MRI compaƟble shielding enclosure in which you can install mulƟple electronic devices so that they may be used safely in an MR room. The SHIELDPixx is opƟmized for reduced EMI at the frequency operaƟon of a 1.5T, 3T or 7T scanner. A power isolaƟon staƟon is also supplied with the SHIELDPixx allowing electronics devices in the SHIELDPixx to be compaƟble and comply with safety standards in an MR room. Also, the SHIELDPixx enclosure includes the StudioPRO Extender powered by Thinklogical’s®. The StudioPRO Extender DVI Extension System transports every frame of a DVI video stream seamlessly with no compression or dropped frames. In addiƟon, all high speed peripherals funcƟon with no latency. Using standard SFP+ transceivers, the system uses mulƟ-mode or single-mode fiber opƟc cable that allow you to place a digital monitor or projector up to 1000 meters (3280 feet) away from the controlling computer without loss of resoluƟon. ELECTROMAGNETIC EMISSION The following picture shows the electromagneƟc emission of a fully funcƟonal PROPixx projector placed inside the SHIELDPixx enclosure. ENCLOSURE USB and DVI extender • Aluminum casing • Width: 45.09 cm (17.750 inches) • Depth: 61.91 cm (24.375 inches) • Height: 35.65 cm (14.0 inches) • Shielding glass window 101.6 mm x 101.6 mm • Two wave guides • USB 2.0 compliant • Allows to connect 4 USB 2.0 devices • DVI Dual Link interface • Video resolution: 3840 x 2400 @ 60 Hz 1920 x 1200 @ 120 Hz POWER ISOLATION STATION • Power 600 VA • C14 inlet type, IEC 320 outlet type (4x) • Input voltage : 115 V /230 VAC • Output voltage : 115 V /230 VAC • Safety approval: o UL506 - General Purpose Transformers o UL1411 – Audio, Radio and Television-type appliances o UL60950 – Information Technology Equipment o UL60601 – Medical and Dental Equipment o EN60601 – Medical and Dental Equipment for European installations o EN60950 – Information Technology for European installations DESCRIPTION: SHIELDPixx shielding enclosure P/N: VPX-ACC-5205