Preview only show first 10 pages with watermark. For full document please download

Datenblatt / Data Sheet

   EMBED


Share

Transcript

ARM 26 Analogue Radio Module for MESA 26 The ARM 26 is an analogue radio module for the Cab Radio MESA 26. It allows the operational communication in analogue radio systems in the frequency bands: MESA26: The universal system architecture contains uniform and standardised interfaces and sub-assemblies ■■ 70 cm (according to UIC 751-3) and conceived as 19” plug-in printed circuit ■■ 2 m boards. Thereby an easy and fast ex- The unit is modular and thus the respective customer requirements configurable. It consists of three functional units: change of the sub-assemblies and the possibility of using the sub-assemblies ■■ Power supply for the connection of the on-board voltage and the generation of the device’s internal operating voltage in all equipment variants and types is guaranteed. The consistent replacement assemblies ensures cost-opti- ■■ 2 m radio module mised spares inventory to permit fast ■■ 70 m radio module and efficient repair and minimized The analog radio is available for different voltage variants and the following specifications: training needed by the maintenance personnel. ■■ ARM 26-xxx/2 for use in 2 m band ■■ ARM 26-xxx/7 for use in 70 cm band ■■ ARM 26-xxx/2/7 for use in both frequency bands (xxx = Voltage input 24 V, 36 V, 48 V, 72 V or 110 V) MMI 2 GSM-R antenna 2 m antenna 0,7 m antenna UIC digital in- and output RS 422 service and diagnostics power supply ethernet locomotive identifications CR26 MMI 1 ARM26 service and diagnostics power supply ARM 26 Technical Specifications Power Supply Maße Input voltage 24 V / 36 V / 48 V / 72 V / 110 V Contraction type rack according to IEC 60297-3 Tolerances according to DIN EN 50155 Dimensions 84 HP / 3 RU / 238 mm Interruption according to DIN EN 50155, class S1 (no interruption) Maximal power consumption 6 A (at 24 V) Environmental Conditions Protection class IP 20 according to DIN EN 60529 Vibration and shocks according to DIN EN 50155 EMC according to DIN EN 50121-3-2 and DIN EN 50155 Climatic Conditions Operating temperature range -25 °C to +70 °C Storage temperature range -40 °C to +70 °C (in original package) Maximal gradient ± 1 °C/min of ambient temperature Maximal humidity 75 % in annual average Relative humidity 95 % on max. 30 days per year Altitude and pressure fluctuation -100 m to 1800 m above sea level HF data 2 m band 70 cm band Modulation type FM or PM (6 dB / oktave) FM Channel spacing 12,5 kHz or 25 kHz 25 kHz Frequency range 140,000 MHz ... 174,000 MHz 456,95 MHz .... 458,65 MHz HF power output (1 ... 25) W 5 level 0,5 /2 /6 /8/ 10 W (sw controlled) HF channel adjustment by RS422 by RS422 140,000 ... 174,000 MHz Duplex- / Scan receiver: 466,95 ... 468,65 MHz Transmitter Reciever Frequency range Simplex receiver: 456,95 ... 458,65 MHz Responsivity min. -107 dBm 20 dB SINAD at 1 kHz (with ± 3 kHz deviation) with CCITT filter -107 dBm (12 dB SINAD, CCITTfilter) Copyright by Funkwerk Aktiengesellschaft | Subject to change without notice Funkwerk Aktiengesellschaft Traffic & Control Communication CR | ARM 26 | EN | V 3.1 Im Funkwerk 5 D-99625 Kölleda +49 (0) 3635 / 458 500 +49 (0) 3635 / 458 399 Internet: www.funkwerk-tcc.de Phone: Fax: