Transcript
• Day/Night Camera in a Cast Aluminum Alloy Housing and a 3.9-inch Polycarbonate Dome • Day/Night Function w/IR cut filter removal mechanism • Endures the Equivalent of 120 lbs of Force • 3.0 - 9.0mm vari-focal integrated lens • Indoor and Outdoor Applications • High Resolution • Line-lock with Phase Adjustment 6.04 153.5 3.85 97.8
nting Holes 4x Ø 0.20 5.1
2.41 61.1
n mm
5.68 144.3
3.28 83.3
6.04 153.5
Threaded for 3/4-inch Conduit. Plug Supplied.
6.04 153.5
3.11 79
Mounting Holes 4x Ø 0.20 Mounting Holes 5.1 4x Ø 0.20 5.1
6.04 4.49 3.85 153.5 114.1
97.8
3.85 97.8
2x Ø 0.20 5.1
2x Ø 0.20 5.1
3.28 2.41 83.3 3.28 61.1 2.41 83.3
DAY /NIGHT Vandal Resistant Dome
2x Ø 0.20 5.1
6.04 153.5 6.04 153.5
61.1
Threaded for 3/4-inch Conduit
in in mm
Threaded for 3/4-inch Conduit
Threaded for 3/4-inch Conduit.
mm
5.68 5.68 144.3
144.3
3.11 3.11 79 79
Threaded for 3/4-inch PlugConduit. Supplied. Plug Supplied.
MLA2DN39
The Aigis MLA2DN39 Day/Night VariDome provides a sharp, clear picture in both lighted and dark viewing conditions. During the day a high resolution color picture is produced, at night the IR cut filter is automatically removed creating a highly sensitive, clear picture in dark conditions. 4.49 4.49 114.1 114.1 Along with the 1/4-inch day/night camera, this unit comes with an integrated 3.0 - 9.0mm vari-focal DC Auto-Iris lens and is prewired for quick installation. Its cast aluminum housing and polycarbonate dome allow it to withstand 120 lbs. of force. It can also be mounted directly onto a single gang electrical box and wired through the back or via a standard 3/4-inch conduit opening found on the side of the housing.
S
P E C I F I C A T I O N S
C A M E R A S P E C I F I C AT I O N S
MLA2DN39 OPTIONS
Resolution
Horizontal: 480 TVL
Voltage Range
24 VAC or 12 VDC, 60 Hz
Power Consumption
1.2W
Sensitivity
0.07lx (b/w mode)
minimum scene illumination f/1.4 lens, 50 IRE
Imager
1/4-inch Image Format; Interline Transfer CCD
Scanning System
NTSC
Signal to Noise
> 50dB
Electronic Shutter
1/60 sec. Fixed (Flickerless; Off) / 1/100 sec. Fixed (Flickerless: ON)
Lens
focal length 3.0 - 9.0mm
Iris
f1.4-360 (DC auto iris)
Backlight Compensation
Selectable On (two mode) / Off Control: 1) center weighted metering, 2) multi spot metering
White Balance
ATW
Video Output
1.0 Vp-p, 75 ohm
Synchronizing System
2:1 Interlace
Phase Adjust
0º to 180º
Connector
Video
BNC
Power
In-line push wire connectors
H
66.3º 23.9º
V
49.1º 17.9º
Angle of view
Controls
Options
Iris, Flickerless, Backlight Compensation, Synchronization Mode
-N
Includes unshielded twisted pair transmitter compatible with NVT receivers. Permits video transmission of up to 750 ft when passive receiver is used & 3000 ft when active receiver is used.
M E C H A N I C A L S P E C I F I C AT I O N S Construction Housing
Polycarbonate dome (with light tint) on custom cast aluminum housing. Standard: Powder coated white finish. Custom finishes available.
Finish
Option: Stainless Steel look - brushed aluminum finish
-SS
Weight
Unit Weight - 3.3 lbs (1.5kg) / Packaged Weight - 4.2 lbs
Surface Mount
Mounts on wall or ceiling using up to four #10 screws.
Cable Entry Mounting
3/4-inch conduit knockout through side or back
E N V I R O N M E N TA L Operating Temperature
-4 ºF to +122 ºF (-20 ºC to +50 ºC)
Humidity
0% to 90% relative, noncondensing.
Protection Level
IP 65.
E L E C T R O M A G N E T I C C O M PAT I B I L I T Y Electromagnetic Compatibility
EMC
FCC Class A.
Safety
UL, cUL
MLA S ERIES - DIMENSIONAL DRAWING 6.04 153.5 Mounting Holes 4x Ø 0.20 5.1
3.28 83.3
3.85 97.8 2x Ø 0.20 5.1 6.04 153.5
2.41 61.1
Threaded for 3/4-inch Conduit
in mm 5.68 144.3
3.11 79
Threaded for 3/4-inch Conduit. Plug Supplied.
4.49 114.1
A
C C E S S O R I E S
Standard color is white. Stainless steel finish and custom colors available. Mounting Kits for MLA Series
MLAP
Pipe mounting kit. Includes ceiling flange, gasket and mounting cap with screws.
MLAW
Wall mounting kit. Includes pendant wall mount, screws and mounting cap with screws.
MLAP - MLA PIPE MOUNT ACCESSORY B
Wire Entry Hole 3.50 88.9
.560
Mounting Hole
3/4-14 NPSM Threads
3.850
3.50 88.9 B 2.406
0.96 24.4
3/4-14 NPSM Threads Both Ends (Not Included)
6.12
Ceiling Flange with Gasket & Mounting Cap Section B
(ø 6.27)
(Dome not included)
(.35) .63
MLAW - MLA WALL MOUNT ACCESSORY 4.430 112.5
Hole pattern permits mounting of unit to a standard North American double outlet electrical box using four screws, included.
6.055 153.8 3.265 4.430 82.9 112.5
1.805 45.8
(4x) Ø 0.180 4.6
in mm
.75 19.05 5.90 149.86 6.06 153.92
(Dome not included)
.187 4.75
8.025 203.8 11.05 280.67
Accessory for the MLAW: MT9213 Pole Mount Adapter
©2004 Aigis Mechtronics 1124 Louise Road, Winston-Salem, NC 27107-5450 Tel: 336.785.7740 Fax: 336.785.7744 w w w. a i g i s m e c h . c o m Data subject to change without notice
04/07 rev_02 Printed in U.S.A.
