Transcript
INSTALLATION AND MAINTENANCE GUIDE
DB 1900 Dolphin Panel Mounted Sensor Tap
Important: Read carefully before installing product
DOLPHIN November 2013
CONTENTS 2
Technical Data
3
Pack List
4-6
Installation Steps
7
Maintenance
7
Limited Warranty
TECHNICAL DATA Item no:
DB 1900
Description:
Dolphin Sensor Tap
Power:
DC: 6v (4 x AA alkaline batteries) AC: 220V-240V 50/60Hz
Power consumption:
< 0.3MW
Sensing distance:
100mm
Water pressure:
0.5 - 7.0 bar
Temperature:
0.1 - 45ºC
Diameter of inlet pipe: G(1/2)” Diameter of outlet pipe: G(1/2)” Flux:
< 0.15 (L/S)
2 | Dolphin Dispensers | DB 1900
PARTS LIST
50mm Cover Tap body Spout Ceramic wall
Counter top
Control box inc solonoid Valve and battery box Signal line connector
300mm minimum distance to surface beneath
Water inlet (with filter)
Water inlet hose Transormation head
Signal transformation
Pipe buckle
Line
Flexible hose
Signal line
DB 1900 | Dolphin Dispensers | 3
INSTALLATION STEPS
1. Install tap body to the wall
Wall
cover
Spout
Fix sensor tap to the wall
4 | Dolphin Dispensers | DB 1900
Sensor
INSTALLATION STEPS
2. Connect power
AC: Connect the transformer
DC: put in 4 x AA alkaline batteries into the battery box
3. Connect water Connect the water feed for the tap to the control box using the flexible hose, ensuring the clip is tightened properly. Connect the water inlet hose to the control box Note: Check for leaks
DB 1900 | Dolphin Dispensers | 5
INSTALLATION STEPS
4. Connect signal cable Connect the signal cable with the control box. Screw tightly.
Note: Keep this cable dry and clean to ensure you do not have any faults.
Installing the Control Box Mount the control box onto the wall, using screws and plugs.
Note: 1. Turn off the water and power supply before
3. For easy maintenance, choose a suitable
820 550
2. Be sure to install the control box correctly.
650
installation.
place to install the control box. It must be less than 500mm from the basin. (Please check the picture opposite). 4. Ensure the tap spout when installed is 300mm from the surface beneath to ensure sensor has room to work.
6 | Dolphin Dispensers | DB 1900
MAINTENANCE Aftercare Whilst modern plating techniques are used in the manufacture of this product, the surface will be affected if cleaned incorrectly. Surfaces should be maintained using a clean damp cloth, no abrasive agents or materials should be used or come into contact with the surface finish, or this will invalidate your guarantee.
LIMITED WARRANTY Dolphin Dispensers. warrants that its electronic products will be free of defects in material and workmanship during normal use for two years from the date the product is purchased. If a defect is found in normal use, Dolphin Dispensers will, at its discretion, repair, provide a replacement part or product, or make appropriate adjustments. Damage caused by accident, misuse, or abuse is not covered by this warranty. Improper care and cleaning will void the warranty. Proof of purchase (original sales receipt) must be provided to Dolphin Dispensers with all warranty claims. Dolphin Dispensers is not responsible for labor charges, installation, or other incidental or consequential costs other than those noted above. In no event shall the liability of Dolphin Dispensers exceed the purchase price of the product. If you believe that you have a warranty claim, contact your Dolphin Dispensers, Dealer or Plumbing Contractor. Please be sure to provide all pertinent information regarding your claim, including a complete description of the problem, the product, model number, the date the product was purchased, from whom the product was purchased and the installation date. Also include your original invoice. DOLPHIN DISPENSERS AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
DB 1900 | Dolphin Dispensers | 7
DOLPHIN Soap Dispensers
Page 5
Taps DOLPHIN
Hot Air Hand Combination Paper Towel Toilet Dryers Units Tissue Dispenser Dispenser
Counter Mounte d 105
100
142
135°
Ø45
Taps
Ø50
Grab Rails Baby Changing Hotel Range s
Consumable
Product Families Installation Guide
Tap • Touch Free Tap – for ultimate hygiene – prevents cross contamination • Quality polished chrome plated brass or lacquered nickel plated brass finishes available • Water Supply: Single inlet cold or pre-mixed – a TMV2 TMV3 thermostatic or mixing valve is recommende premixed applications. d for For 2 inlet hot and cold feed see page 183 • Flow rate – 6 litres/minute (down to 1.89 litres/minute please specify at – time of ordering) • Neopearl Aerator • Tap settings can be adjusted manually or by using remote control (DB51 – see page 188) • Mandatory Hygiene Flush feature can be specified to combat Legionella – please specify at time of orering • WRAS Approved Product • 2 year manufacturer ’s warranty • Maximum water temperature 70ºC • Operating pressure 0.5–8.0 bar (7–116 PSI)
Related items
Washroom Accessories
Bins
Power source
DB 200 / DB 225 Dolphin Blue Infrared
DB 200 page 178
178 Dolphin Dispensers
DBL 400 page 180
WP 106 page 11
Product Data • H 142 x Ø 45 mm • Projection 105mm • Power Connections: tap male, power source female • Counter hole Ø 28-34mm Min-max thickness 2-27mm • 3/8" BSP water supply connector • Power: Plug-in 9 volt transformers or 9 volt battery (with low battery warning) – for other power source options see page 190-191 Product Codes Polished chrome finish • Powered by 6 x AAA / 9v PP3 battery • Powered by 9v plug in transformer
Request your 320 page catalogue today on
0800 0723 404
DB 200C DB 225C
Brushed nickel finish (designed to match brushed stainless steel) • Powered by 6 x AAA / 9v PP3 battery DB 200S • Powered by 9v plug in transformer DB 225S
WP 208R page 12
WP 112R page 105
Technical helpline
BC 2006 page 159
01424 202224
Bell-Chem Products Company Haywood Way, Hastings TN35 4PL Tel: +44 (0)1424 202224 Fax: +44 (0)1424 205 200
[email protected] www.dolphindispensers.co.uk
