Transcript
16.2
MOULDING AND CURING
TEMPERATURE RECORDER 6 INPUT CHANNELS
AT 248
The measurements, which are transformed into tracks on the graph-paper, are achieved with iron-constantan thermocoupled wires in concrete casts during the curing phases. Temperature: from 0 to 100°C (1° sub-divisions). Paper advancement 60 mm/h (upon request 20, 120, 240, mm/h), paper width 120 mm. Power supply: 220 V, 50 Hz, single phase. Dimensions: 230 x 280 x 440 (h) mm. Weight: 10 kg. Supplied without accessories which should be ordered separately. AT 248
Accessories and spare parts: AT 248/1
5 rolls of graph paper (15m each)
AT 248/2
3 sets of 6 inked ribbons
AT 248/5
Iron constan wire, 100 m bobbin
DB 834
THERMOCOUPLE THERMOMETER (N. 4 PROBES): - 200 + 1370°C
High resolution and extended temperature range. Instant printouts of date, time and temperature: the memorized information can later be displayed, downloaded and/or printed. It can take up to 4 separate probes. The sophisticated software allocates up to 15000 temperature readings to maximize available space. The LCD shows temperature with a secondary level of readout displaying logging interval, time and date. Resolution K: 0.1°C (-99.9 to 999.9°C), 1°C (1000 to 1370°C), 0.2°C (-200.0 to -100.0°C). Accuracy: ± 0.5°C (-200.0 to 999.9°C); ± 1°C (outside). Printing/Logging Intervals: selectable from 1, 2, 5, 10, 15, 30, 60, 120 and 180 minutes. Power: 4 x 1.5V AA batteries, 350 of continuous use. Dimensions: 220 x 82 x 66 (h) mm. Weight: 500 g. DB 834/S
DB 840
Thermocouple K type probe (50 mm bobbin) DIGITAL THERMOMETER (-200 +400°C)
Resolution 0.1° C. Display LCD. Accuracy ±0.05° C.
DB 829
DB 829
DB 840/1
Immersion probe, dia. 3 x 230 (h) mm. (temperature -50 + 400°C)
DB 840/2
Air probe, dia. 4 x 230 (h) mm. (temperature -50 + 250°C)
DB 840/3
Contact probe, dia. 5 x 230 (h) mm. (temperature -50 + 400°C)
DB 830/2 DB 830/1 DB 831/5 DIGITAL THERMOMETER (°C/°F) - 60 + 1200°C and - 76 + 2000°F
Large LCD display. 0.1°C resolution. (Supplied without probes). Power: 3 x 1.5 V battery. Automatic change of scale (°C/°F).
DB 830/1 DB 830/2 DB 830/3 DB 830/4 DB 830/5 DB 831
Accessories and spare parts:
DB 840/E
DB 834
DB 831/5
PENETRATION PROBE: Ø 4.5x150 mm long Temperature: AMBIENT to 500°C IMMERSION PROBE: Ø 3x180 mm long Temperature: AMBIENT to 800°C AIR PROBE: Ø 4x180 mm long Temperature: AMBIENT to 400°C SURFACE PROBE: Ø 5x180 mm long Temperature: AMBIENT to 500°C IMMERSION PROBE: Ø 6x700 mm long Temperature: AMBIENT to 1200°C 8-WAY CONNECTOR FOR DB 831/5 Complete with cable and plug for connection to the thermometer. It allows the connection of thermocouple probes (cable type) and the reading of each probe (alternatively) on the display. THERMOCOUPLE K TIPE: 400°C 5 m cable. Complete with connecting plug.
DIGITAL THERMOMETER (-50 +150°C)
Resolution: 0.1°C. Precision: 0.4°C. Supplied with probe: dia. 3 x 100 mm. 9 V battery: autonomy for 700 hours use. Dimensions: 83 x 180 x 40 (h) mm. Weight: 226 g.
DB 840/E
DB 840
377
