Transcript
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
Features RoHS compliant Compliant with SONET/SDH standard Compliant with Fast Ethernet standard Compliant with IEEE802.3ah 100Base-BX Compliant with ITU-T G.985 class S Industry standard small form pluggable (SFP) package Simplex SC connector Differential LVPECL inputs and outputs Single power supply 3.3V TTL signal detect indicator Hot Pluggable Class 1 laser product complies with EN 60825-1
Ordering Information PART NUMBER
TX/RX
INPUT/OUTPUT SIGNAL DETECT
DB1310-SFP-SC.S20
1310/1550
AC/AC
DB1310-SFP-SC.S20(WT) 1310/1550
AC/AC
TEMPERATURE
LD Type
Distance
LVTTL
0C to 70 C
1310 FP
20km
LVTTL
Option;-40C to 85 C
1310 FP
20km
Absolute Maximum Ratings PARAMETER
SYMBOL
MIN
MAX
UNITS
TS
40
85
C
Supply Voltage
Vcc
0.5
4.0
V
Input Voltage
VIN
0.5
Vcc
V
Output Current
Io
---
50
mA
Operating Current
IOP
---
400
mA
Storage Temperature
Page 1 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
NOTE
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
Recommended Operating Conditions PARAMETER
SYMBOL
Case Operating Temperature TC
Case Operating Temperature (option)
MIN
MAX
UNITS
NOTE
0
70
DB1310-SFP-SC.S20
-40
85
C C
DB1310-SFP-SC.S20(WT)
Supply Voltage
Vcc
3.1
3.5
V
Supply Current
ITX + IRX
---
200
mA
Transmitter Electro-optical Characteristics Vcc = 3.1 V to 3.5 V, TC = 0 C to 70 C (-40 C to 85 C) PARAMETER Output Optical Power 9/125 m fiber
SYMBOL
MIN
TYP.
MAX
UNITS
NOTE
Pout
14
---
8
dBm
Average
Extinction Ratio
ER
8.2
---
---
dB
Center Wavelength
C
1261
1310
1360
nm
Spectral Width (RMS)
---
---
4
nm
Rise/Fall Time (1090%)
Tr, f
---
1
2
ns
Output Eye
Compliant with Telcordia GR-253-CORE Issue 3 and ITU-T recommendation G-957
Max. Pout TX-DISABLE Asserted
POFF
---
---
45
dBm
Differential Input Voltage
VDIFF
0.4
---
2.0
V
Page 2 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
Receiver Electro-optical Characteristics Vcc = 3.1 V to 3.5 V, TC = 0 C to 70 C (-40 C to 85 C) PARAMETER
SYMBOL
MIN
TYP.
MAX
UNITS
NOTE
Optical Input Power-maximum Optical Input Power-minimum (Sensitivity)
PIN
0
---
---
dBm
BER < 1010
PIN
---
---
32
dBm
BER < 1010
Operating Center Wavelength
C
1480
---
1600
nm
Optical Return Loss
ORL
14
---
---
dB
=1480~1600nm
Optical isolation
ISO
---
---
-40
dB
=1480~1600nm
Loss of signal-Asserted
PA
---
---
32
dBm
Loss of signal-Deasserted
PD
45
---
---
dBm
VDIFF
0.5
---
1.6
V
Tr, f
---
1
2
ns
RX_LOSL
0
---
0.5
V
RX_LOSH
2.4
---
VCC
V
Differential Output Voltage Data Output Rise, Fall Time (10%~90%) Receiver Loss of Signal Output Voltage-Low Receiver Loss of Signal Output Voltage-High
Page 3 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
Block Diagram of Transceiver
DATA DATA/
LD Drive & Fault Sense
LD
TX_DISABLE TX_FAULT PRE. AMPLIFIER IC
(0) (1)
PD
WDM Filter
MOD_DEF
(2) OPTICAL DATA DATA/
SUB-ASSEMBLIES POST-Amp & LOS Detect
RX_LOS
Transmitter and Receiver Optical Sub-assembly Section A 1310 nm InGaAsP laser and an InGaAs PIN photodiode integrate with an WDM filter to form a bi-directional single fiber optical subassembly (OSA). The laser of OSA is driven by a LD driver IC which converts differential input LVPECL logic signals into an analog laser driving current. And, The photodiode of OSA is connected to a circuit providing post-amplification quantization, and optical signal detection. TX_DISABLE The TX_DISABLE signal is high (TTL logic “1”) to turn off the laser output. Receive Loss (RX_LOS) The RX_LOS is high (logic “1”) when there is no incoming light from the companion transceiver. This signal is normally used by the system for the diagnostic purpose. The signal is operated in TTL level.
Page 4 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
Dimensions
DIMENSIONS ARE IN MILLIMETERS
ALL DIMENSIONS ARE 0.2mm UNLESS OTHERWISE SPECIFIED
Page 5 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
SFP host board mechanical layout X Y
S XY A 1
LXA S
1
PIN1
LXA S
LEGEND
A SB S
PIN1
1.PADS AND VIAS ARE CHASSIS GROUND 2.THROUGH HOLES, PLATING OPTIONAL 3.HATCHED AREA DENOTES COMPONENT AND TRACE KEEPOUT(EXCEPT CHASSIS GROUND) 4.AREA DENOTES COMPONENT KEEPOUT (TRACES ALLOWED) DIMENSIONS ARE IN MILLIMETERS
A SB S A SB S
Unit: mm
Page 6 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
Pin Assignment Pin-Out
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
PIN 11
PIN 20
PIN 10
PIN 1
Signal Name
Description
TGND TX_FAULT TX_DISABLE MOD_DEF (2) MOD_DEF (1) MOD_DEF (0) RATE SELECT RX_LOS RGND RGND RGND
Transmit Ground Transmit Fault Transmit Disable SDA Serial Data Signal SCL Serial Clock Signal TTL Low Open Circuit Receiver Loss of Signal, TTL High, open collector Receiver Ground Receiver Ground Receiver Ground Receive Data Bar, Differential PECL, ac coupled Receive Data, Differential PECL, ac coupled Receiver Ground Receiver Power Supply Transmitter Power Supply Transmitter Ground Transmit Data, Differential PCEL, ac coupled Transmit Data Bar, Differential PCEL, ac coupled Transmitter Ground
RX RX RGND VCCR VCCT TGND TX TX TGND
Page 7 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
RoHS compliant TX-1310/RX-1550 nm Single-mode Bi-directional (Single-Fiber) SFP SC Simplex Connector 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet / 100Base-BX10-U/ITU-T G.985
Eye Safety Mark The LS3 series single mode transceiver is a class 1 laser product. It complies with EN 60825-1 and FDA 21 CFR 1040.10 and 1040.11. In order to meet laser safety requirements the transceiver shall be operated within the Absolute Maximum Ratings.
Required Mark Class 1 Laser Product Complies with 21 CFR 1040.10 and 1040.11
Caution All adjustments have been done at the factory before the shipment of the devices. No maintenance and user serviceable part is required. Tampering with and modifying the performance of the device will result in voided product warranty. Note : All information contained in this document is subject to change without notice.
Page 8 of 8 Version 1.0 Date:4/12/2007
TEL: 03-3836-5611 FAX: 03-3836-5614 Website: http://www.dci.jp
