Transcript
W005M THRU W10M
DC COMPONENTS CO., LTD. R
RECTIFIER SPECIALISTS
TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts
CURRENT - 1.5 Amperes
FEATURES * Surge overload ratings to 50 Amperes peak * Good for printed circuit board assembly
WOM .360 (9.1) .340 (8.6)
MECHANICAL DATA
.217 (5.5) .197 (5.0)
* Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Terminals: MIL-STD-202E, Method 208 guaranteed * Polarity: As marked
1.0 (25.4) MIN.
1.2 (30.5) MIN.
* Mounting position: Any
* Weight: 1.20 grams
.032 (0.8) .028 (0.7)
POS. LEAD
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
.220 (5.6) .180 (4.6)
.220 (5.6) .180 (4.6)
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
SYMBOL
W005M
W01M
W02M
W04M
W06M
W08M
W10M
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Bridge Input Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
o Maximum Average Forward Output Current at T A = 25 C
Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum DC Forward Voltage Drop per Element at 1.0A DC Maximum Reverse Current at rated
@T A = 25 oC
DC Blocking Voltage per element
@T A = 125 o C
Volts
IO
1.5
Amps
I FSM
50
Amps
VF
1.1
Volts
IR
10
µAmps
500
I 2t Rating for Fusing (t = 8.3ms)
I2t
10
Typical Junction Capacitance ( Note 1)
CJ
24
RθJ A
36
TJ
-50 to + 125
0
C
T STG
-50 to + 150
0
C
Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range
A 2 Sec pF 0
C/W
NOTES : 1. Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13x13mm) copper pads.
REV-1,Apr/25/2013
RATING AND CHARACTERISTIC CURVES (W005M THRU W10M)
50
40
8.3ms Single Half Sine-Wave (JEDEC Mathod)
30
20
10
0
1
2
5
10
20
50
100
FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD OUTPUT CURRENT, (A)
PEAK FORWARD SURGE CURRENT, (A)
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
1.6
1.4
1.2
0.8
Single Phase Half Wave 60Hz Inductive or Resistive Load
0.4
0
20
50
20.0
TJ=25oC
1.0
Pulse Width=300ms 1% Duty Cycle
.1
.01
.2
.4
.6
.8
1.0
1.2
150
1.4
INSTANTANEOUS FORWARD VOLTAGE, (V)
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (µA)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
10.0
100
CASE TEMPERATURE, (oC)
NUMBER OF CYCLES AT 60Hz
1.6
10
1.0
.1 TJ=25oC
.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
DC COMPONENTS CO., LTD. R
REV-1,Apr/25/2013
