Transcript
R
DC Input Two-Ports PoE Midspan
PT-PSE205G-E
Introduction PT-PSE205G-E is a two-ports DC input industrial-grade PoE mid-span with AT standard detection chip inside, compliant with IEEE802.3at standard. Provide 48VDC outpout 15.4W per port for remote PD. There is a rail slot on the back can be fixed at guide rail. Support 10/100/1000Mbps. It provides power for IEEE802.3af/at terminal equipment,such as wireless AP, network camera and VoIP phone.
PT-PSE205G-E suitable for indoor using, works well at 10-24VDC input. Support 8-lines network signal and PoE port 6KV(10/700us) surge&ligntning protection. It is connected to network equipment through Cat5e cable, the effective distance is 100 meters, bear with tough environment.
12 3 45 1. PoE Output Port 4. PoE Load Active Instruction Light 2. LAN Input Port 5. DC Input Port 3. PoE Power Supply Instruction Light
Key Features
Outline Drawing
- Standard AT detection chip is inside, detect PD before provide power. - Power Pin：4/5(+),7/8(-) - Output Voltage : 48VDC - Output Power : 15.4W per port - Industrial grade design - Operating tempreture : -40 to +65℃ - High power, flexiable deployment, lower cost. - Support terminal equipment with IEEE802.3af/IEEE802.3at
Beijing Creative Lianjie Network Technology Co., Ltd.
http://www.cxlj.com.cn
Specification Standard
Dimension & Weight
- IEEE802.3 10Base-T Ethernet - IEEE802.3u 100Base-Tx Fast Ethernet - IEEE802.3ab 1000Base-T Gigabit Ethernet - IEEE802.3af/802.3at Power over Ethernet standard - RoHS Compliant - WEEE Compliant,CE/FCC - FCC Part 15,Class B - EN 55022 Class B - MTBF:100,000 小时.@25℃
- Dimension：115mm(L) X 75mm(W) X 32mm(H) - Weight：0.60kg
Environment & Condition - Operation Temperature：-5 to +45℃ - Operation Height：-304.8 meters to 3048 meters - Operation Humidity：Maximum90％，without coagulation
LED Instructions - DC Power LED：Green - Active Load LED：Yellow
PoE Power Output - Port No：2 - Power Pin：4/5(+),7/8(-) - Data Rate：10/100/1000Mbps - Output Voltage：48V - Output Current：350mA - DC Power Input：10-24VDC - Input Current：4A
Network Signal Surge Protection - Protection Line :1，2，3，4，5，6，7，8 - Common-mode Surge Protection（10/700us) : 6KV - Clamp Voltage（1、2；3、6；4、5；7、8）：7.5VDC
PoE Power Output Surge Protection - Different-Mode Surge Protection (10/700us):6KV - Power Clamp Voltage (4、5—7、8)：60VDC
Work Functional Picture
Data & Power Data 10-24VDC Power Solar Power
Solar Panel 10-24VDC Power
Wireless AP PoE Mid-span Switch Indoor
Order Info : PT-PSE205G-E
Outdoor
Boost/48VDC/15.4W/1000M/(4,5+,7,8-)
Packing Info ：PT-PSE205G-E x 1 Product Manual x 1
This document belongs to PROCET comany.Without written permission, it is not allow any publication, upload, post, delivery or public use.It is also PROCET policy to improve its products as new technology, components, software,and firmware at any time,PROCET, therefore, reserves the right to change specifications without prior notice.
