Transcript
DC133 Digital Visualizer
User manual
English - 1
Table of Contents COPYRIGHT INFORMATION ................................................................................ 4 CHAPTER 1 PRECAUTIONS ................................................................................ 5 CHAPTER 2 PACKAGE CONTENT ...................................................................... 7 CHAPTER 3 PRODUCT OVERVIEW .................................................................... 8 3.1
PRODUCT INTRODUCTION .................................................................... 8
3.2
I/O CONNECTION ................................................................................. 9
3.3
DIP SWITCH ........................................................................................ 9
3.4
REMOTE CONTROL ............................................................................ 10
CHAPTER 4 HOW TO USE IT ............................................................................. 11 4.1
GETTING STARTED ............................................................................ 11
4.1.1
TURN ON THE DIGITAL VISUALIZER ................................................. 11
4.1.2
LENS FOCUS .................................................................................. 11
4.1.3
ZOOM IN / OUT ............................................................................... 11
4.2
GENERAL FUNCTIONS ........................................................................ 12
4.2.1
SWITCH SOURCE ............................................................................ 12
4.2.2
PHOTO/TEXT ................................................................................. 12
4.2.3
ZOOM IN / OUT ............................................................................. 13
4.2.4
ADJUST BRIGHTNESS .................................................................... 13
4.2.5
OSD MENU ................................................................................... 13
4.2.6
OSD FUNCTION SELECT ................................................................ 14
4.3
ADVANCED ........................................................................................ 14
4.3.1
CAPTURING IMAGE ......................................................................... 14
4.3.2
PLAYING IMAGE ............................................................................. 14
4.3.3
DELETE IMAGES ............................................................................ 15
CHAPTER 5 OSD MENU INTRODUCTION ........................................................ 17 5.1
OPERATION MENU ............................................................................. 17 English - 2
5.2
OSD MENU ....................................................................................... 17
CHAPTER 6 TROUBLESHOOTING.................................................................... 20
English - 3
Copyright Information Copyright © Lumens Digital Optics Inc. All rights reserved. Lumens Digital Optics Inc. is in process the trademark registration of Lumens. No part of this document may be copied, reproduced, or transmitted by any means, without prior written permission from Lumens Digital Optics Inc. Except documentation kept by the purchaser for backup purposes. In the interest of continuing product improvement, Lumens Digital Optics Inc. reserves the right to change product specifications without notice. Information in this document may change without notice. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Disclaimer: Lumens Corporation shall not be liable for technical or editorial errors or omissions. Patent: M286526 & I260916 (Taiwan) & ZL 2005 2 0129210.7 (China)
English - 4
Chapter 1 Precautions Always follow these safety instructions when setting up and using the Digital Visualizer:
1. 2. 3. 4.
Do not place the Digital Visualizer on an unstable trolley, stand or table. Do not use the Digital Visualizer near water or source of heat. Use attachments only as recommended. Use the type of power source indicated on the Digital Visualizer. If you are not sure of the type of power available, consult your dealer or local electricity company for advice.
5. Place the Digital Visualizer can be easily unplugged. 6. Always take the following precautions when handling the plug. Failure to do so may result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket. Ensure that the plug is inserted into the socket securely.
7. Do not overload wall sockets, extensions leads or multi-way plug boards as this may cause fire or electric shock.
8. Do not place the Digital Visualizer where the cord can be stepped on as this may result in fraying or damage to the lead or the plug.
9. Unplug the projector form the wall socket before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
10. Do not block the slots and openings in the projector case. They provide ventilation and prevent the Digital Visualizer from overheating. Do not place the Digital Visualizer on a sofa, rug or other soft surface or in a built-in installation unless proper ventilation is provided.
11. Never push objects of any kind through cabinet slots. Never allow liquid of any kind to spill into the Digital Visualizer.
12. Except as specifically instructed in this User’s Manual, do not attempt to operate this product by yourself. Opening or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to licensed service personnel.
13. Unplug the Digital Visualizer during thunderstorms or if it is not going to be used for an extended period, do not place the Digital Visualizer or remote control on top of beat-emitting equipment or heated objects such as a car and etc.
14. In the following situations, unplug the Digital Visualizer from the wall outlet and refer servicing to licensed service personnel:
If the power cable or plug becomes damaged or frayed. If liquid is spilled into it or the Digital Visualizer has been exposed to rain or
English - 5
water.
Safety Precautions Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This Digital Visualizer has a 2 wires AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to defeat this safety feature. If the Digital Visualizer will not be used for an extended time, unplug it from the power outlet. CAUTION RISK OF ELECTRIC SHOCK
Caution: To reduce the risk of electric shock. Do not remove cover (or back). No user-serviceable parts inside. Refer servicing to licensed service Personnel. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in this User’s Manual with this unit.
FCC Warning This Digital Visualizer has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. These limits are designed to provide reasonable protection against a harmful interference when the equipment is operated in a commercial environment.
EN55022 (CE Radiation) Warning This product is intended for use in a commercial, industrial, or educational environment. It is not intended for residential use. This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.
English - 6
Chapter 2 Package Content Please make sure the package comes with the following items when you unpack: (11
items) Main Unit
Quick Start Guide
User’s Manual
CD
Power Cable
VGA Cable
USB Cable
Remote
C-Video Cable
Soft Bag (Big)
Soft Bag (Small)
English - 7
Chapter 3 Product Overview 3.1 Product Introduction
Gooseneck
Lens Lamp
I/O Port
Power/Control keypad
Infrared rays area
DIP Switch
English - 8
3.2 I/O Connection
3.3 DIP Switch The default settings are listed below！
AE ON
3.4
C-Video
PAL
SVGA
ON OFF (Default)
1 AE OFF
2 RGB
3 NTSC
4 XGA
(OFF at all time)
English - 9
Remote Control
3
2
1
4 5
7 7
6 10 12
8
13 11
1.
Power:
9
8.
Zoom +/-:
9.
Play／Del: Recall／Delete the saved images in the flash memory of your Digital Visualizer. Flip:
Turn on/ off.
2.
Capture:
Make the image larger & smaller
Capture the image
3.
Freeze: Freeze the image
4.
AWB:
10.
Auto white balance
5.
Menu:
Rotate the image by 180 degrees
11.
Lamp:
12.
Source:
Show the Control Menu (OSD Menu)
6. 7.
BRT+/-: Adjust the image brightness ghij / Enter: g h i j select the desired function item, then press Enter to take effect
Turn on/ off Lamp Switch between different signal sources
13.
Photo/ Text: Select the text or photo mode
*Only use CR2025 as replacement battery. Dispose used battery properly please.
English - 10
Chapter 4 How to use it 4.1 Getting Started 4.1.1 Turn on the Digital Visualizer Keypad
Remote
4.1.2 Lens focus ¾ Turn the lens to optimize the focus
4.1.3 Zoom in / Out
¾ Press the control button
on the remote controller
English - 11
4.2 General Functions 4.2.1 Switch source Press 『Source』to change the image source from PC. The default setting is Digital Visualizer. Keypad
Monitor
Remote
PC
Notebook
Projector
4.2.2 Photo/Text The default setting is『Photo』. Choose『Text』for displaying text file. Remote
English - 12
4.2.3
Zoom in / Out
4.2.4 Adjust Brightness
4.2.5 OSD Menu
English - 13
4.2.6 OSD Function Select Keypad
Remote
1. Press 『^ v< >』 to search functions. 2. Press the Enter key to enable your selection.
4.3 Advanced 4.3.1 Capturing Image Remote：Press『Capture』to capture the image you want. Control Panel： 1. Press『Menu』to access OSD menu. 2. Press『 T 』to choose
(Storage) and press『Enter』to
execute. 3. Press『 T 』to choose『Capture』. 4. Press『Enter』to execute image capturing. 5. Double click『Menu』to exit.
4.3.2 Playing Image Remote： 1. Press『Play』to display all the images. 2. Press『ef』to select the thumbnail picture you want to browse. English - 14
3. Press『Enter』to display the image with full screen. 4. Press『ef』to view next image. 5. Press『Play』to go back. 6. Press『Menu』to exit. Control Panel: 1. Press『Menu』to access OSD menu. 2. Press『 T 』to choose
(Storage) and press『Enter』to
execute. 3. Press『 T 』to choose『Play』 4. Press『Enter』to enter into browsing screen. 5. Press『ef 』to select the thumbnail picture you want to browse. 6. Press『Enter』to display the image with full screen. 7. Press『ef』to view next image. 8. Double click『Menu』to exit.
4.3.3 Delete Images Remote: 1. Press『Play』to enter into browsing screen. 2. Press『ef』to choose the image you want to delete. 3. Press『Del』to delete the selected image right away. Control Panel: 1. Press『Menu』to access OSD menu. 2. Press『 T 』to choose
(Storage) and press『Enter』to
execute. 3. Press『 T 』to choose『Play』. 4. Press『Enter』to enter into browsing screen. 5. Press『ef 』to select the thumbnail picture you want to browse. English - 15
6. Press『Enter』to display the image with full screen. 7. Press『Menu』to access OSD menu. 8. Press『 T 』to choose
(Storage) and press『Enter』to
execute. 9. Press『 T 』to choose『Delete』 10. Press『Enter』to execute image deleting. 11. Double click『Menu』to exit.
English - 16
Chapter 5 OSD Menu Introduction 5.1 Operation Menu Remote Control and Display Panel: 1. 2. 3. 4.
Press『Menu』to access OSD menu. Press『d Sfe』to select the function that you want. Press『Enter』to execute. Double click『Menu』to exit the OSD menu.
5.2 OSD Menu y There are four layers for OSD menu – Display, Setting, Source and Storage
y After accessing into OSD menu, it will disappear automatically after certain seconds. ¾ VGA Mode Layer 1
Layer 2
Layer 3
Function
Lamp
On / Off
Select Lamp On or Off.
Night view
On / Off
Language
English, Deutsch, Francais, Italiano, Espanol, Русский,
Setting
, Output Format Factory Reset Exit
Select Night view function On or Off. menu.
, Exit
XGA 75Hz/XGA 60Hz/ SVGA 75Hz/ SVGA 60Hz Enter/Exit
Select a preferred language on the
Select a fitting output format.
Reset all the values to the factory default. Exit menu.
English - 17
Brightness
0-46 (for PAL) 0-40 ( for NTSC)
Brightness adjustment
Display Zoom
Digital Zoom
Gamma
Photo / Text
Select Photo/Text Mode.
Image
Normal / Gray / Film
Select Normal/Gray/Film Mode.
Flip
On/Off
Adjust the image up and down by
Adjust Zoom 100% ~ 1600%.
180°. Freeze
On/Off
Use Freeze to retain the image on the screen.
Exit
Exit this menu.
Visualizer
Source
Storage
Select images of Visualizer or VGA
VGA In
In.
Capture
Capture the image of Visualizer.
Playback
Present the captured image.
Delete Delete All Format
Delete the captured image. Enter/ Exit Memory Format Enter/ Exit
Format
Delete all images. Memory Format Exit menu. Exit menu.
English - 18
¾ C-Video Mode Layer 1
Layer 2
Layer 3
Function
Brightness
0-46 (for PAL)
Brightness adjustment
0-40 ( for NTSC) Display
Gamma
Photo/Text
Select Photo/Text Mode.
Image
Normal/Gray
Select Normal/Gray Mode.
Freeze
On/Off
Use Freeze to retain the image on the screen.
Exit Lamp
Exit this menu. On/Off
Turn On/Off lamp
Full Range On/off Advance
Switch Full range on/off and night
Night view On /off
view on/off
Exit Setting
Language Factory Reset Exit
English/ /Exit Enter / Exit
,
,
Select a preferred language on the menu. Reset all the values to the factory default. Exit this menu. Exit menu.
English - 19
Chapter 6 Troubleshooting This chapter describes the problems you might have encountered when you use this Digital Visualizer. If you have a problem, refer to the appropriate section and follow all the suggestions that apply to your problem. If none of the suggested solutions solves the problem, call your dealer or your service center. Problem 1: No picture from the Digital Visualizer. Solution 1: Wait a few seconds, press desired source selector again. 2: Press a different source, then press-desired source again. 3: Check if the power of the Digital Visualizer is turned on. 4: Make sure the document or object is positioned under the camera. Problem 2: Cannot Focus, camera will not focus properly. Solution - To properly focus: Zoom in as far as possible on the document or object, focus and then zoom out to desired distance. Problem 3: Image is too bright or dark can not see desired part of the image because it is too bright or dark. Solution – Adjust the Control Button on the Digital Visualizer.
* The updated information will be regularly released on Lumens web site, please visit our web site http://www.lumens.com.tw for the latest information.
English - 20
