Preview only show first 10 pages with watermark. For full document please download

Dcdc30a

   EMBED


Share

Transcript

5/30/12 DCDC30A - HCdP Electronics HCdP Electronics (Pty) Ltd 233 Fountain Street Bellevue (Silverton) Pretoria, South Africa, 0184 Tel: +27 12 804 1377 Fax: +27 12 804 8917 DCDC30A NEW 12V 30A DC to DC dual purpose charger Features High current dual purpose 30A 12V DC to DC battery charger Suitable for deep cycle and cranking lead acid batteries of 70Ah and higher battery capacities Eliminates dual battery switch Will not flatten vehicle battery Compensates for voltage drops over supply wires Dual purpose lead acid battery charger (charges from car or solar panel without having to re-connect car or solar panel) Integrated 360W MPPC solar charger Integrated alternator overload protection Integrated bypass circuit automatically connects loads directly to alternator when charger operates thus making full 30A available to charge battery. Three state charger optimises charging (bulk, constant voltage and trickle charging) Two colour charge indicator LED shows charging and charge completion status Integrated battery temperature compensation to prolong battery life Twin two speed thermally controlled cooling fans Integrated over temperature protection Short circuit and reverse battery protection on all inputs and outputs Sturdy powder coated mild steel enclosure Easy installation with high quality screw type wire connections Operating instructions Connect load (fridge etc) to terminals marked +Ld and GND Connect auxilliary battery to terminals marked +Bat and GND Connect 10mm sq wire from vehicle\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'s battery to terminals marked +Car and GND observing polarity Connect Ign input to a switched ignition line in vehicle Connect solar panel to terminals marked +SP and GND Switch selector switch to Car for charging from Car www.hcdpelectronics.co.za/print_product.php?prod=DCDC30A 1/2 5/30/12 DCDC30A - HCdP Electronics Switch selector switch to SP for Charging from Solar Panel Place temperature sensor at battery Specifications Switch ON voltage Switch OFF voltage Charge input voltage Solar input power Charge current Output voltage Output voltage Load current Input current Operating temperature Dimensions Weight : >13,3V (on ignition input) : <12.5V (on ignition input) : 10.5V to 15V between GND and +Car input : 360W max : 30A max : 14.2+/-0.1V in charge mode (Amber LED ON) : 13.8 +/-0.1V in Trickle mode (Green LED ON) : 25A max : 65A max with max load current of 25A : -10 to +45 degrees Celsius : 175mm x 165mm x 68mm : 1425 gram NOTES Only the car or solar panel can charge the battery (not both simultaneosly) Solar Panel MPPC (Maximum Power Point Control) ensures that the maximum power is extracted from the Solar Panel Warning Do not block ventilation holes on top or on the side Do not expose to rain or water No user servicable parts inside Return to seller if malfunctioning Warranty This product will be replaced or repaired if a failure occurs within one year, from the date of purchase, as a result of faulty materials or workmanship provided that the product is returned to the seller with proof of purchase. Replacement or repair shall be at the discretion of the manufacturer. This warranty excludes failures which results from misuse of the product. The manufacturer and/or seller shall not be held liable for personal injury of consequential damages that may result through the use of this product. Lightning damage is excluded from this warranty. Note The manufacturer reserves the right to change the product specification without prior notice as a result of his continued development and improvement program. Picture may differ from actual product http://www.hcdpelectronics.co.za www.hcdpelectronics.co.za/print_product.php?prod=DCDC30A 2/2