Preview only show first 10 pages with watermark. For full document please download

Dcm-300bah-os

   EMBED


Share

Transcript

DCM-300BAH-OS OPTI-SERVE SERIES SANITARY CUBELET ICE MACHINE/DISPENSER DCM-300BAH-OS 08/14/17 Item # 13285 Item #: Project: Qty: AIA#: WxDxH 26" x 221/2" x 40” Features SD-450 261/4" x 22" x 321/2” Durable stainless steel exterior SD-500 Advanced CleanCycle24TM design 257/8" x 22" x 323/4” TM Stainless steel auger with greaseless bearing DCM-300BAH-OS Air-Cooled Shown with optional SD-450 Stand • Up to 321 lbs. of ice production per 24 hours • Built-in storage capacity of 1.3ft3/40 lbs.* • 2 second flush cycle every hour • Corrosion resistant stainless steel exterior *Hands-free sensor designed for use with opaque containers. Not intended for outdoor use - avoid placement in direct sunlight. • Easy to chew, cubelet ice • Self-contained design reduces oppportunities for cross contamination • Protected by H-GUARD Plus Antimicrobial Agent • Dispenses ice and water • R-404A Refrigerant Warranty: 3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries. *Rated in accordance with AHRI Standard 820(I-P). Capacity based on 100% of total volume x 30 lb/ft3 average density of ice. ICE PRODUCTION Condenser Air-Cooled Model DCM-300BAH-OS WATER USAGE ELECTRICAL Air / Water Temp Condenser Potable kWh Used Max. Fuse Size Type of Ice Lbs. per 24 hours Amperage or HACR Gal. per 100 lbs. Gal. per 100 lbs. per 100 lbs. (Hardness Rating) 90°/ 70°F 90°/ 70°F 70°/ 50°F 90°/ 70°F 90°/ 70°F Circuit Breaker 321 Cubelet Dimensions* Cubelet (88) 232 12.5 Operating Limits • • • • Ambient Temp Range Water Temp Range Water Pressure Voltage Range N/A 6.84 45 - 100°F 45 - 90°F 10 - 113 PSIG 104 - 127V 20A 10.25A Voltage Heat Rejection BTU/hr. Shipping Weight 115V/60/1 3,500 240 lbs. ENERGY STAR® Plumbing • Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent • Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent Service • Allow 6” (15 cm) clearance at rear and sides for proper air circulation and ease of maintenance/ service should they be required. Allow 24” (61 cm) clearance at top to allow for removal of the auger. * approximate size in inches, image not to scale Printed in the U.S.A. © HOSHIZAKI AMERICA, INC. Not intended for outdoor use - avoid placement in direct sunlight. Hoshizaki reserves the right to change specifications without notice. 618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com DCM-300BAH-OS DCM-300BAH-OS 08/14/17 Item # 13285 OPTI-SERVE SERIES SANITARY CUBELET ICE MACHINE/DISPENSER FRONT VIEW inch [mm] SIDE VIEW AIR-COOLED Front REAR VIEW AIR-COOLED TOP VIEW AIR-COOLED Front AIR-COOLED © HOSHIZAKI AMERICA, INC. 618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com Printed in the U.S.A.