Dd–1203l–2

Transcript

www.keyang.com ORIGINAL INSTRUCTION MANUAL CORDLESS DRIVER DRILL (Li-ion Battery) ORIGINAL - BETRIEBSANLEITUNG DE HANDLEIDING NL MODE D’EMPLOI ORIGINAL EN FR ORYGINALNA INSTRUKCJA UŻYTKOWANIA PL PROVOZNÍ PŘÍRUČKA CZ DD–1203L–2 ORIGINAL INSTRUCTION MANUAL EN EN ОРИГИНАЛЬНАЯ ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ RU MANUAL ORIGINAL DE INSTRUCŢIUNI RO EREDETI HASZNÁLATI ÚTMUTATÓ HU ORIGINALNO UPUTSTVO ZA UPOTREBU SR ОРИГИНАЛНО РЪКОВОДСТВО С ИНСТРУКЦИИ BG MANUALE DI ISTRUZIONI ORIGINALE IT ORIGINAL BRUKSANVISNING SE ALKUPERÄINEN KÄYTTÖOHJE FI ΠΡΩΤΟΤΥΠΟ ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ GR DK To ORIGINAL reduce the INSTRUKTIONSBOG risk of injury, user must read instruction MANUAL DE INSTRUCCIONES ORIGINAL ES manual ORİJİNAL KULLANIM EL KİTABI TR 2 EN ILLUSTRATIONS KEYANG DD–1203L-2 DRIVER DRILL 1 2 ② ③ ① ⑨ ⑧ ④ ⑤ ⑦ 3 ⑥ 4 7 10 5 6 9 8 11 KEYANG DD–1203L-2 DRIVER DRILL SAFETY REGULATIONS 3 CORDLESS DRIVER DRILL (Li-ion Battery) It is essential that instruction manual is read before the power tool is operated for the first time. Always keeps this instruction manual together with the power tool. Ensure that the instruction manual is with the power tool when it is given to other persons. Table of Contents 1. General Power Tool Safety Warnings..............3 2. Specific Safety and Warnings.........................4 3. Check before Use...........................................6 4. Specifications and List of Contents.................6 5. Noise and vibration.........................................7 6. Description of Functions and Applications......7 7. Operating Instructions....................................7 8. Maintenance...................................................9 9. Examples of Application.................................9 Note As our engineers are striving for the constant research and development to develop the quality of products, shape or structure of our model can be changed without previous notice. 1.General Power Tool Safety Warnings WARNING! Read all safety warning and all instructions. Failure to follow the warning Instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains -operated (corded) power tool or Battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive Atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will Increase the risk of electric shock. d) Do not abuse the cord. Never use the cord carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or key left attached to a rotating part of the power tool may result in personal injury. EN 4 EN ILLUSTRATIONS e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dustrelated hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. KEYANG DD–1203L-2 DRIVER DRILL g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery pack. Use of any other battery packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shortening the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 2. Specific Safety and Warnings • Do not use the charger under the rain or • • when it is wet. Failure to observe this can cause serious injury or death due to electric shock. Do not insert metal wire or any conductive object through the ventilating opening of the charger. Failure to observe this can cause serious injury or death due to electric shock. Do not attempt to disassemble the charger and keep the charger out of the reach of children. Electric shock may cause injury. Do not use the charger under the rain or when it is wet. KEYANGFailure DD–1203L-2 DRIVER DRILL to observe this can cause serious injury or death due to electric shock. Do not insert metal wire or any conductive object through the ventilating opening of the charger. • • • • • • • • • • • • Failure to observe this can cause serious If theinjury cordorofdeath the charger has shock. due to electric beenDo damaged, replace or repair it • not attempt to disassemble the immediately. the charger with out of chargerUsing and keep the charger damaged cord may cause electric shock. the reach of children. Electric shock may cause injury. If the cord of the charger has been If the cord of the charger has been damaged, replace or repair it damaged, replace or repair it immediately. • immediately. Using the charger with damaged cord may Using the charger with damaged cord may cause electric shock. cause electric shock.injury. Electric shock may cause Electric may cause Do not throwshock the battery into injury. the live fire. In theDo fire,not the throw batterythe maybattery explodeinto due the to live fire. high temperature and cause serious injury. In the fire,the theterminals battery mayofexplode due toIf Do not short the battery high temperature and cause serious injury. the terminals of the battery is short circulated, • Do not short excessive current willthe flowterminals and fire orof the battery explosion may occur causing serious injury. the terminals of the is short circuited, • AvoidIf strong impact on battery the battery and excessive current will flow andwith fire or do not pierce the battery case a sharpexplosion object. may occur causing serious injury. Fire orAvoid explosion mayimpact occur causing strong on theserious battery injury.and do not pierce the battery case • Storewith the battery a sharpindoors object.at 0~40ºC and avoidFire direct light and closed and or explosion may occurhot causing humid places. serious injury. Fire orStore explosion may occur causing the battery indoors atserious 0 ~40 injury.and avoid direct light and closed hot Do not make yourplaces. fingers and hands and humid touchFire with the drill bit during operation. or explosion may occur causing When your fingers and hands are touched serious injury. with the drill bit or caught in it, you may be Do not make your fingers and hands injured seriously. touch with the drill bit during Do not leave the running tool. Otheroperation. operators stayed close to you may be When your fingers and hands are touched injured. with the drill bit or caught in it, Set the forward/reverse lever inyou themay be position injured seriously. neutral while you are changing Do not leave the running tool. or operating the tool. Other operators close to cause you may Careless operating of stayed the switch may a be injured. serious injury by the rotating part of the tool. the forward/reverse lever MakeSet sure the battery is attached in in thethe position you bodyneutral of the tool tightlywhile before youare start changing or operating the tool. operation. WhenCareless the battery is not attached tightly, operating of the switch mayit cause a may be falleninjury during and serious by the the operation rotating part of cause the tool. an injury in the topthe of your foot. is attached in Make sure battery Charge only Keyang approved rechargeable batteries. Other types of batteries may burst causing personal injury and damage. Do not disassemble battery. Incorrect re assembly may result in a risk of the body of the tool tightly before you start operation. When the battery is not attached tightly, SAFETY it may be fallen duringREGULATIONS the operation and 5 cause an injury in the top of your foot. Charge only Keyang appoved rechargeable batteries. Other types of batteries may burst causing personal injury and damage electric shock, electrocution or fire. Do not disassemble battery. Accessories may bemay hot result after in prolonged Incorrect reassembly a risk of use. electric shock, electrocution or fire. When removing may the bitbe from tool avoid Accessories hotthe after contact with skin and use proper protective prolonged use. gloves grasping bitthe or accessory. Whenwhen removing the bitthe from tool avoid Keep thewith battery from contact skin and usebeing properoverheated. If protective overheated battery is inserted, gloves when graspinghigh the bit or temperature accessory. stand by is indicated and charging canbattery only start afterbeing the battery has Keep the from been cooled down. When the battery is overheated. overheating due to continuous operation, in If overheated battery is inserted, high order to protect the battery performance will temperature standby is indicated and automatically the power. charging canshut only off start after the battery has Leaving the battery for a prolonged time been cooled down. without using it will shorten the life of the When the battery is overheating due to battery. continuous operation, in order to protect the If the battery is to be stored for a prolonged battery performance will automatically shut off time, charge it completely before storing it. the power. To use the battery for a long period of time, Leaving the battery for3amonths. prolonged charge it completely every without using it will shorten the Iftime drill stalls, it is usually because it is life ofoverloaded the battery. being or improperly used. If the battery is toimmediately. be stored for a prolonged Release trigger time, it completely storing it. to Do not charge click trigger on and before off in an attempt To use the battery for acan longdamage period ofthe time, start a stalled drill. This drill. charge it completely every 3 months. If drill stalls, it is usually because it is being overloaded or improperly used. Release trigger immediately. Doexplanation not click trigger on in an attempt An of and anyoffsymbols orto start a stalledon drill.the Thistool can damage the to drill. pictogram relevant safe use. An explanation of any symbols or pictograms on the tool relevant to safe use Wear goggles Wear ear plugs Wear safety helmet Wear protective gloves EN 6 SPECIFICATIONS KEYANG DD–1203L-2 DRIVER DRILL 3. Check before Use Use Check before EN Max. 50 Max. 50 Return waste Return waste material material Return waste material The Thebattery battery The battery over temperatures temperatures over50ºC 50 cause temperatures over 50 causedamage damage cause damage Do Donot notincinerate incineratethe the Do not pack incinerate the battery battery pack battery pack Do Donot notdispose disposeof of Do not dispose of batteries with batteries withgenearl general batteries refuse. refuse. with general refuse. V V V V - Volts - Volts - Direct Current - Direct Current Rotation only - Rotation only - Rotation only - Class II construction construction - Class construction no - No load speed V speed n V o - No load speed /min - Revolutions or reciprocations /min - Revolutions per minute or reciprocations per minute ~ - Alternating current ~ - Alternating current ECDeclaration Declarationof ofconformity conformity EC EC Declaration ofproducts conformity We declares that these meet the standards We declares that these products meet the We these products meet the standards EN declares 60745-1,that EN 60745-2-1, EN 60335-1, standards EN 60745-1, EN EN 60745-2-1, EN 60335-1, EN 60335-2-29, 55014-1, EN EN 60745-1,EN 60745-2-1,EN55014-2, 60335-1,v EN ENEN 55014-1, EN 55014-2, EN 60335-2-29, 61000-3-2 and 61000-3-3 EN 61000-3-2 and EN 61000-3-3 EN 61000-3-2 and EN 61000-3-3 Category )) ((Category ( Category ) with directives 2006/95/EC, 2006/42/EC, compliance inincompliance with directives 2006/95/EC, in compliance with directives 2006/95/EC, 2006/42/EC, 2004/108/EC. 2006/42/EC, 2004/108/EC. 2004/108/EC. (Legally binding signature of the issuer) signature (Legally binding signatureofofthe theissuer) issuer) Ki Hwang,binding Lee Ki Hwang Lee and Quality Assurance Ki Hwang, Director of Lee R&D Director R&D andand Quality Assurance Directorofof R&D Quality Assurance before Use 1. TheCheck power source • Observe correct main voltage. The voltage 1. The power source of power source must agree with the voltage 1. The power source Observe correct main voltage. The voltage specified in the name plate.The Observe correct main voltage. voltage of power source must agree with the • Make sure the rated voltage in the electric drill of power source must agree voltage specified in the name plate.with the thethe battery are the same. When the rated voltage specified in the name plate. Makeand sure rated voltages in the electric voltage of rated the battery higher than that Make sure voltages in the electric drill and thethe battery are theissame. When the of the drill and the battery the can same. When the by electric drill, motor damaged rated voltage of the theare battery is be higher than rated voltage of the drill, battery higher than fire. that of the electric the ismotor can be that thebyelectric the motor can be 2. of Attachment the battery damaged fire. ofdrill, damaged fire.the battery is attached correctly Makebysure 2. Attachment of the battery before you use electric tool. 2. Attachment ofthe the battery Make sure the battery is attached correctly Make sure the battery is attached in the body Make sure the battery is attached before you use the electric tool. correctly of the before before you usetool thetightly electric tool. you start operation. Make sure the battery is attached attached tightly, in the it When the battery is not Make sure battery isbefore attached the bodybe of thethe tool tightly youinstart may fallen during the operation and cause body of the tool the tightly before start operation. When battery is notyou attached an injury in the top of your foot. operation. When battery is the not operation attached tightly, it may be the fallen during 3. tightly, it may be fallen during operation and cause injury in the top the of your foot. Polarity ofanthe battery and cause an injury in the top of your foot. When the polarity of the battery is not correct, 3. Polarity of the battery it may cause the trouble of the switch. Also, 3. Polarity of the battery the reversal of the rotating direction can bring When the polarity of the battery is not correct, aWhen situation. polarity of the battery is not correct, it dangerous may the cause the trouble of the switch. Also, itthe may causeof the trouble of the switch. Also, 4. Trial run reversal the rotating direction can bring the reversal ofsituation. thethe rotating direction bring a dangerous Before starting work, wear can protection a dangerous situation. (goggles, safety helmet, ear plugs, protective 4. Trial run gloves) 4. Trial runand run the tool in the direction avoiding to see if(goggles, the tool is Before starting theother work,persons wear protection Before starting theplugs, work,protective wear protection (goggles, operated normally. safety helmet, ear gloves) and runthe safety ear plugs, protective gloves) to and tool in helmet, the direction avoiding other persons seerunthe if the tool the direction avoiding other persons to see if the tool in is operated normaly. tool is operated normaly. 4. Specifications and List of Contents 1. Specifications Specifications and List of Contents Specifications and List of Contents Model Items 1. Specifications 1. Specifications Rated voltage [V DC] DD-1203L-2 10.8 DD-1202L-2 No load Model Sp. 1st gear 0-350 Items Model DD-1202L-2 Items 10.8 Rated voltage [V DC] [/min] 2nd gear 0-1300 10.8 Rated voltage [V DC] Noload speed 0-350 gear Tool1stholder 1/4” (6.35mm) Noload speed 1st gear 0-350 Tool [ / minWeight(without ] 2nd gear battery)[kg] 0-1300 0.7 [ / min ] 2nd gear 0-1300 Chuck capacity[mm] Steel 0.8-10 10 Maximum Tool Chuck capacity[mm] 0.8-10 Tool Weight(Without battery)[kg]Wood 0.8 capacity 15 Weight(Without battery)[kg] 0.8 Steel Maximum 10 [ømm] Wood screw 6 Steel Maximum 10 capacity Wood 15 capacity Wood 15 [ mm] Wood screw 6 [ mm] Wood screw 6 SPECIFICATIONS KEYANG DD–1203L-2 DRIVER DRILL Battery Model BL10801 BL10802 Voltage [VDC] 10.8 10.8 Capacity [MAh] 1300 1500 Weight [Kg] 0.2 0.2 Imput Voltage [VAC] 110-127 / 220-240 Imput Frequency [VAC] 50/60 Output Voltage [VDC] 10.8 Battery Charger Charging Current [A] Charging Time [Min] 2.6 30 Weight [kg] 35 0.4 Saftey Class 7 Method given in EN60745 and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure. 5) A warning • The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used. • Identify additional safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 6. Description of Functions and Applications 2. List of Contents Fabric case 1 EA Battery 1 or 2 EA Battery Charger 1 EA Instruction Manual 1 EA 5. Noise and vibration 1. Noise and vibration 1) Noise emission Measured values are according to EN 607452) The operator to wear hearing protection Power Tool DD-1203L-2 A weighted sound power leval [LWA] [dBA] 76 A weighted admision leval [dBA] 65 Uncertainty [K] [dBA] 3 3) Vibration emission Vibration total values(triaxial vector sum) Vibration total values(triaxial vector sum) Power Tool DD-1203L-2 2 Drilling Vibration value (ah) [m/s ] Mode Uncertatey (k) [m/s2] 2.5 1.5 4) The following information • The declared vibration total value has been measured in accordance with a standard test 1. Description of Functions • DD-1203L-2 • 1 ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ Lock sleeve Torque adjustment ring Speed selector switch Rotation direction switch Housing Battery On/Off switch Work light Tool holder 2 • Battery • • Charger • 3 2. Applications Drilling mode : For drilling in woods, metals, plastics or other non concrete materials. 7. Operating Instructions 1. How to charge the battery (1) Insert the plug of the charger in the socket, and the charging indicating lamp will be flickered in green, red and yellow in turn within one second. And then, the battery charger will be in the stand by position. (2) Insert the battery in the battery charger considering the polarity, and the charging will be started immediately. EN 8 EN SPECIFICATIONS A new battery will work properly after five times of charging and discharging. Charge and discharge the battery, which is not used for a long time, for two to three times to function well. (3) When the battery working time is remarkably short despite full charging, the life of the battery may be over. Replace the battery immediately. Take care not to short-circuit the terminal of the battery. The short-circuit of the terminal may cause a fire or explosion doing a serious personal injury. 2. Charging process KEYANG DD–1203L -2 DRIVER DRILL 4. 1= 2= 3= 4= 5. Always set the rotational direction switch at centre position when inserting the battery or changing, carrying or storing the tool. Charge state of the battery 6 Pulling the switch trigger will turn on the battery level indicator for about 2 seconds. Battery 70 - 100% charged Battery 30 - 69% charged Battery less than 30% charged Battery flat of defective (Blinking/Turn off) Work light 7 Pulling the switch trigger will turn on the LED light Reversing the Rotation Direction Use only the specified battery and battery charger. Otherwise battery and charger can be damaged by 6. fire, explosion, charging error or overheat. Reversing the rotation direction must be done 4 only when the tool is switched off. Reversing the 1) Charging indication direction during operation may damage the tool Green Blinks : Before charging 8 Red Lights : While charging Green Lights : Charging completed L (Left rotation) : Counter clockwise direction Red Blink : Overheat stand by (for loosening of screw) (Battery overheated) R (right rotation) : Clockwise direction Yellow Blinks : Charging impossible (for fastening of screw, drilling) Neutral : Rotation lock (for changing the bit) Be sure to unplug the charger after 7. Adjusting the Speed finishing the charging. 9 2) If charging of the heated battery is attempted immediately after it has been used or charged, 1) Press the switch The power tool switch allows the speed to be indicator blinks in red (overheat stand by). After increased steeples up to maximum. the cooling, indication changes to red glowing 10 and charging begins. 3) This charger detects charging status of the 2) Move the speed selector switch battery and always keeps the battery in full 1: Low speed, high torque charge state. 2: High speed, low torque Use only the specified battery and battery Do not change direction of rotation until charger. Otherwise battery and charger can the power tool is at a stand still. be damaged by fire, explosion, charging error or overheat. 3. Installing and removing battery 5 1) Installing. • Set the rotational direction switch at centre position (locked state). • Insert the charged battery into the slot below the handle until the battery securely latched with a click. 2) Removing. • Push the battery button once and take it out to remove it. 8. Torque setting 1) Screw work • Selection is feasible from among five setting anges by force (torque) adjustment ring. 1 Low setting range when working with small screw or at soft working material. 18 High setting range when working with large screw or at hard working material. • When the tool is reached at the set torque, the overload clutch begins to work to keep the tool in the desired torque. You should set the desired torque in the practical work. Selection is feasible from among five setting anges by force (torgue) adjustment ring. low setting range when working with small screw or at soft working material. ake it KEYANG DRIVER DRILL high DD–1203L-2 setting range when working with large screw or at hard working material. witch at When the tool is reached at the set torque, battery the overload clutch begins to work to keep tool. the tool in the desired torque. You should set the desired torque in the practical work. 2) Drilling 3. 2) Drilling • Set the drilling drilling Setthe thetorque torqueadjustment adjustment ring to the position. position.( ) n the Theswitch switchhas hasbraking brakingfunction. function.When Whenyou you econds. The releasethe theswitch, switch,it itbrings bringsthe themotor motortotoa a release suddenstop. stop.Also, Also,the thesurplus surplusrotation rotationwill willbe sudden be stopped. ed stopped. It is very convenient for fastening It is very for fastening screws screws in convenient soft materials processed. The in softspindle materials processed. drill is locked when the switch is not pressed. If drill stalls, it is usually because itbecause is it is being If drill stalls, it is usually k light overloaded or improperly used. Release being overloaded or improperly trigger immediately.used. Do not click trigger on and off in an attempt to start a stalled drill. Release trigger immediately. Do not ng the switch trigger will turn on LED light 9. Automatic click trigger on and off in an Spindle attemptLock to 4. not The drill spindle is locked when the switch is rsing the Rotation Direction start a stalled drill. pressed. Reversing the rotation must be 9.direction Automatic Spindle Lock This makes quick and easy changing of the tool done only when the tool is switched off. in the drill chuck possibble. This makes quick and easy changing of the Reversing the direction during operation 10. Battery Protection may damage the tool tool in the drill chuck possible. When the battery is overheating due to This makes quick andcontinuous easy changing theto protect the operation, inof order ation) : Counterclockwise direction battery performance will automatically shut off the 9. (for loosening of screw) tool in the drill chuck possible. power. tation) : Clockwise10. direction Battery Protection (for fastening of screw, drilling) Maintenance When Rotation lock (for changing the bit) the battery is overheating due to continuous operation, in order tokeep protect usting the Speed Always tool and airthe ventage clean for safe work. battery performance will automatically shut off e switch the power. 1. Changing tool Keep the lock sleeve pressed forward while taking out the bit. slot ecurely 8. Maintenance Before you change the tool, you must remove the battery from the body of the electric drill or Always keep tool and air vent clean for direction swith in lock position set the rotational e speed selector switch (neutral position). speed, high torquesafe work. Figure 11 wer tool switch allows the speed to ased steplessly up to maximum. 0 speed, low torque 1. Changing Tool o not change direction of rotation until he power tool is at a stand still. 1) Mounting the Bit Pull the lock sleeve forward. Insert a screw driver bit into the tool holder to the end and release the lock sleeve. 2) Removing the bit Keep the lock sleeve pressed forward while taking out the bit. Before you change the tool, you must remove the battery from the body of the ork electric drill or set the rotational tion is feasible from among five setting s by force (torgue) direction switch in lock position ment ring. etting range when working with small (neutral position).2.Environmental Protection w or at soft working material. The tool and its accessories contain much setting range when working11 with large raw materials and plastics that can be w or at hard working material. recycled after their life. Therefore, plastic 1)at theMounting the Bit the tool is reached set torque, parts are indicated with their material types so verload clutch begins to work to keep that they can be classified and recycled for • Pull the lock sleeve forward. ol in the desired torque. You should material type. e desired torque in• the practical work. Insert a screw driver biteach into the tool holder to Do not dispose of the battery with home garbage or into the fire or river. the end and release the lock sleeve. e torque adjustment ring to the drilling on.( ) 2) Removing the Bit 3. What to do when the tool does not work normally witch has braking function. When you • theKeep forward e the switch, it brings motor tothe a lock sleeve pressed For power tool with type Y attachment: if the en stop. Also, the surplus rotation will while taking out the bit.replacement of the supple cord is necesary, pped. que setting ry convenient for fastening screws in aterials processed. this has to be done by the manufactuer or his agent in order to avod a safety hazard. 2. Environmental Protection It is very dangerous for customers to The tool and its accessories contain much raw materials and plastics that can be recycled after their life. Therefore, plastic parts are indicated with their material types so that they can be classified and recycled for each material type. Do not dispose of the battery with home garbage or into the fire or river. 2.Environmental Protection The tool and its accessories contain mu SPECIFICATIONS 9 raw materials and plastics that can recycled after their life. Therefore, plas parts are indicated with their material types that they can be classified and recycled each material type. Do does not dispose of the battery with hom What to do when the tool not work garbage or into the fire or river. EN normally For power tool with type Y attachment: if the 3. What to do when the tool does not work norma replacement of the supple cord is necessary, For power with typeorYhis attachment: if this has to be done by the tool manufacture replacement of thehazard. suppleItcord agent in order to avoid a safety is is necesary, to be done by the manufactuer or very dangerousthis forhas customers to trouble shoot agent in order to avod a safety or repair the tool for themselves, Contact thehazard. It is very dangerous customers nearest A/S centre (sales agency)for and request to for a service. troubleshoot or repair the tool for themselves, Contact the nearest A/S center (sales agency) The repair shall be requested to the and request for a service qualified electric specialist. The repair shall be requested to the qualified electric speciailst. Y attachment cord Y attachment cordof the supply cord is If 4. the replacement If the replacement of the supply cord is necessary. has bebydone necessary. thisThis has to be to done the by the manufacturer or his agent in order to avoid a manufacturer or his agent in order to avoid a safety hazard. safety hazard. Examples Application Examples ofofApplication Driver Bit Driver Bit Magnetic Set Socket Bit Power Screwdriver Set Drill Bit for Woodwork Hole Saw Drill Bit for Woodwork Chuck Adaptor CORDLESS DRIVER DRILL Socket Adaptor Socket Adaptor Universal Joint Socket Drill Socket Socket Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. 823-2 Wonsi-dong, Danwon-gu, Ansan-shi, Kyonggi-do, KOREA Tel : Int+82-31-490-3000 Fax : Int+82-31-490-3019