Transcript
C8051F X X X DK D E V E L O P M E N T K I T Q U I C K -S TA R T G U I D E F O R K I TS F E A T U R I N G T H E USB D E B U G A D A P T E R Installation 1
Connect USB Debug Adapter to Target Board with JTAG/DEBUG cable
4
2
Connect USB cable to USB Debug Adapter
Connect power supply to Target Board
Note: Some Target Boards include options for alternate power sources. See Development Kit User's Guide for details.
6
Select “Install Silicon Laboratories IDE” from the introduction window and follow the on-screen instructions
Silicon Laboratories Inc. 4635 Boston Lane Austin, TX 78735 Tel: 1+(512) 416-8500 Fax: 1+(512) 416-9669 Toll Free: 1+(877) 444-3032 Email:
[email protected] Internet: www.silabs.com
5
3
Connect USB cable to PC
Insert Development Kit CD in CD-ROM Drive
Note: If autorun does not launch the introduction window, run "SETUP.EXE" directly from the CD.
From the Programs list in the Start menu, select Silicon Laboratories and click on the Silicon Laboratories IDE logo
7
Copyright © 2005 by Silicon Laboratories
8
Silicon Laboratories IDE opens
Rev. 0.1 5/05
Example Program 9
Open project file "BLINK.WSP" in "Examples" directory
10
11
Connect to Target Board
Download the program
14
Execute example program Green LED on target board flashes as program runs
Select “Connection Options…” from “Options” menu Select USB Debug Adapter Select Correct Debug Interface C8051F0xx C8051F1xx C8051F2xx C8051F3xx
2
-> -> -> ->
JTAG JTAG JTAG C2
12
Click on "BLINK.ASM" to open source file
13
15
Stop execution of example program
16
Set a breakpoint
17
Execute program breakpoint encountered
18
Step through program
19
Open Debug windows
20
View/modify Peripherals, Registers, Memory
Build and
Rev. 0.1
