Transcript
ORDER NO.
CRT3434 DEH-P5700MP/XM/EW
MULTI-CD CONTROL HIGH POWER CD/MP3/WMA PLAYER WITH RDS TUNER
DEH-P5700MP
/XM/EW
DEH-P5730MP/XM/EW
This service manual should be used together with the following manual(s): Model No. CX-3158
Order No. CRT3394
Mech.Module S10.1AAC
Remarks CD Mech. Module : Circuit Description, Mech. Description, Disassembly
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005 K-ZZA. FEB. 2005 Printed in Japan
1
2
3
4
SAFETY INFORMATION This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician.
A
1. Safety Precautions for those who Service this Unit. • When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results. Caution: 1. During repair or tests, minimum distance of 13cm from the focus lens must be kept. 2. During repair or tests, do not view laser beam for 10 seconds or longer.
B
2. A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.
3. The triangular label is attached to the mechanism unit frame.
CLASS 1 LASER PRODUCT C
4. Specifications of Laser Diode
D
Specifications of laser radiation fields to which human access is possible during service. Wavelength = 800 nanometers
- Service Precaution 1. You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and should keep the safety during servicing by following the safety instructions described in this manual. 2. Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on mode may damage the ICs inside the unit. 3. To protect the pickup unit from electrostatic discharge during servicing, take an appropriate treatment (shorting-solder) by referring to "the DISASSEMBLY". 4. After replacing the pickup unit, be sure to check the grating.
E
F
2
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
[Important Check Points for Good Servicing] In this manual, procedures that must be performed during repairs are marked with the below symbol. Please be sure to confirm and follow these procedures. A
1. Product safety Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual. 1 Use specified parts for repair. Use genuine parts. Be sure to use important parts for safety. 2 Do not perform modifications without proper instructions. Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as radio/TV interference and foreign noise. 3 Make sure the soldering of repaired locations is properly performed.
B
When you solder while repairing, please be sure that there are no cold solder and other debris. Soldering should be finished with the proper quantity. (Refer to the example) 4 Make sure the screws are tightly fastened. Please be sure that all screws are fastened, and that there are no loose screws. 5 Make sure each connectors are correctly inserted. Please be sure that all connectors are inserted, and that there are no imperfect insertion. 6 Make sure the wiring cables are set to their original state. Please replace the wiring and cables to the original state after repairs. In addition, be sure that there are no pinched wires, etc.
C
7 Make sure screws and soldering scraps do not remain inside the product. Please check that neither solder debris nor screws remain inside the product. 8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord. Damaged power cords may lead to fire accidents, so please be sure that there are no damages. If you find a damaged power cord, please exchange it with a suitable one. 9 There should be no spark traces or similar marks on the power plug. When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure connections and suitable usage. Please exchange the power cord if necessary. 0 Safe environment should be secured during servicing.
D
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries. Please pay attention to your surroundings and repair safely.
2. Adjustments To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification. Adjustments should be performed in accordance with the procedures/instructions described in this manual.
3. Lubricants, Glues, and Replacement parts Use grease and adhesives that are equal to the specified substance. Make sure the proper amount is applied.
E
4. Cleaning For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper cleaning should be performed to restore their performances.
5. Shipping mode and Shipping screws To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual.
F
DEH-P5700MP/XM/EW 5
6
7
8
3
1
2
3
4
CONTENTS SAFETY INFORMATION ..................................................................................................................................... 2 1. SPECIFICATIONS ............................................................................................................................................ 5 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6 2.1 PACKING ................................................................................................................................................... 6 2.2 EXTERIOR................................................................................................................................................. 8 2.3 CD MECHANISM MODULE..................................................................................................................... 12 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 14 3.1 BLOCK DIAGRAM ................................................................................................................................... 14 3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE).............................................................................. 16 3.3 KEYBOARD UNIT.................................................................................................................................... 22 3.4 CD MECHANISM MODULE(GUIDE PAGE) ............................................................................................ 24 4. PCB CONNECTION DIAGRAM ..................................................................................................................... 34 4.1 TUNER AMP UNIT................................................................................................................................... 34 4.2 KEYBOARD UNIT.................................................................................................................................... 38 4.3 CD CORE UNIT(S10.1) ........................................................................................................................... 40 4.4 PANEL UNIT ............................................................................................................................................ 42 5. ELECTRICAL PARTS LIST ............................................................................................................................ 43 6. ADJUSTMENT ............................................................................................................................................... 49 6.1 CD ADJUSTMENT................................................................................................................................... 49 6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT .................................................... 51 6.3 ERROR MODE ........................................................................................................................................ 53 7. GENERAL INFORMATION ............................................................................................................................. 54 7.1 DIAGNOSIS ............................................................................................................................................. 54 7.1.1 DISASSEMBLY ..................................................................................................................................... 54 7.1.2 CONNECTOR FUNCTION DESCRIPTION .......................................................................................... 57 7.2 PARTS...................................................................................................................................................... 58 7.2.1 IC .......................................................................................................................................................... 58 7.2.2 DISPLAY ............................................................................................................................................... 66 7.3 OPERATIONAL FLOW CHART ............................................................................................................... 67 7.4 CLEANING............................................................................................................................................... 68 8. OPERATIONS ................................................................................................................................................ 69
A
B
C
D
E
F
4
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
1. SPECIFICATIONS A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
5
1
2
3
4
2. EXPLODED VIEWS AND PARTS LIST NOTES : • Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List. • The > mark found on some component parts indicatesthe importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. • Screw adjacent to mark on the product are used for disassembly. • For the applying amount of lobricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.)
A
"
2.1 PACKING
B
C
D
E
F
6
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
(1) PACKING SECTION PARTS LIST Mark No.
*
*
Description
Mark No.
Part No.
15
1 2 3 4 5
Polyethylene Bag Cord Assy Accessory Assy ••••• Screw Assy
CEG-162 CDE7059 CEA4993
6 7 8 9 10
Fixing Screw Screw Polyethylene Bag Screw Screw
BPZ20P060FZK CBA1650 CEG-127 CRZ50P090FTC TRZ50P080FTC
11 12 13 14
Polyethylene Bag Handle Holder Holder
CEG-158 CNC5395 CND1249 CND1250
16, 17 18 19 20 21
CEA3848
* *
22-1 22-2 22-3 22-4 22-5
Description Bush
Part No. CNV3930 A
••••• Carton Contain Box Protector Protector
See Contrast table(2) See Contrast table(2) XHP7003 XHP7004
Owner's Manual Owner's Manual Owner's Manual Installation Manual Passport
CRD3941 CRD3942 CRD3943 CRD3944 CRY1013
22-6 Warranty Card 23 Case Assy
B
CRY1157 CXB3520
(2) CONTRAST TABLE DEH-P5700MP/XM/EW and DEH-P5730MP/XM/EW are constructed the same except for the following: Mark
No.
Description
18 19
Carton Contain Box
DEH-P5700MP/XM/EW CHG5422 CHL5422
DEH-P5730MP/XM/EW CHG5423 CHL5423
Owner's Manual,Installation Manual Part No.
C
Language
CRD3941
English, Spanish
CRD3942
German, French
CRD3943
Italian, Dutch
CRD3944
English, Spanish, German, French, Italian, Dutch
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
7
1
2
3
4
3
4
2.2 EXTERIOR A
B
C
D
E
F
8
DEH-P5700MP/XM/EW 1
2
5
6
7
8
(1) EXTERIOR SECTION PARTS LIST Mark No.
>
Description
Mark No.
Part No.
1 2 3 4 5
Screw Screw Screw Screw Cable
BMZ30P040FZK BSZ26P060FTC BSZ30P060FTC BSZ30P200FTC CDE7189
6 7 8 9 10
Case Earth Plate Insulator Cushion Tuner Amp Unit
CNB2793 CNC8915 CNM7682 CNM8890 CWM9774
11 12 13 14 15
Screw Screw Screw Fuse(10A) FM/AM Tuner Unit
ASZ26P060FTC BPZ26P080FTC BSZ26P160FTC CEK1208 CWE1645
16 17 18 19 20
Holder Pin Jack(CN351) Plug(CN981) Connector(CN101) Plug(CN831)
CND1054 CKB1054 CKM1376 CKS3408 CKS3537
21 22 23 24 25
Connector(CN721) Connector(CN671) Antenna Jack(CN401) Holder Heat Sink
CKS3837 CKS4124 CKX1056 CND1352 CNR1668
26 27 28 29 30
Terminal(CN402) Holder Insulator Holder Unit Chassis Unit
VNF1084 CND1325 XNM7031 CXB6681 See Contrast table(2)
31 32 33 34 35
••••• ••••• Detach Grille Assy Screw Button(SOURCE)
See Contrast table(2) BPZ20P100FZK CAC9008
36 37 38 39 40
Button(BAND) Spring LCD(LCD1) Connector(CN1) Holder
CAC9009 CBL1470 CAW1851 CKS5207 CND2510
41 42 43 44 45
Sheet Lighting Conductor Connector Cushion Sub Grille Assy
CNM9287 CNV8274 CNV8275 XNM7049 See Contrast table(2)
46 47 48 49
Knob(VOLUME) Button(TA) Button(DISPLAY) Button(LOUDNESS)
XAA7021 XAC7089 XAC7063 CAC9086
Description
Part No.
50
Button(OPEN)
XAC7065
51 52 53 54 55
Button(1-6)
56 57 58 59 60
Button(EJECT) Screw(M2x4.5) Screw(M2x4) Washer Spring
CAC7752 CBA1647 CBA1649 CBF1038 CBH2650
61 62 63 64 65
Spring Spring Spring Holder Gear
CBH2651 CBH2652 CBH2653 CND1254 CNV5997
66 67 68 69 70
Arm Arm Arm Arm Panel Unit
CNV7400 CNV7401 CNV7402 CNV7403 CWM9781
71 72 73 74 75
Connector(CN1950) Connector(CN1951) Holder Unit Holder Unit Damper Unit
CKS5192 CKS4806 CXB9501 CXB9502 CXB9503
76 77 78 79 80
Sub Panel Unit Cover Lighting Conductor Spring Pin
See Contrast table(2) CNM6854 CNV6487 CBL1512 CNV6486
81 82 83 84 85
Screw Cord Assy Insulator Insulator
ISS26P055FTC CDE7059 XNM7100 XNM7106
86 87 88 89 90
Panel ••••• Choke Coil(L981) Transistor(Q751, 901) IC(IC911)
See Contrast table(2)
91 92 93 94 95
IC(IC301) ••••• ••••• IC(IC2) Cap
PAL007A
96
Lavel
VRW-329
See Contrast table(2) Button(FUNCTION, AUDIO, EQ) XAC7071 Spring XBH7001 Cover See Contrast table(2) Sub Button Assy(UP, DOWN, LEFT, RIGHT) XXA7310
6
B
C
D
CD Mechanism Module(S10.1AACA) CXK5668
E
CTH1291 2SD2396 NJM2388F84
TSOP4840SB1 CKX-003 F
DEH-P5700MP/XM/EW 5
A
7
8
9
1
2
3
4
(2) CONTRAST TABLE DEH-P5700MP/XM/EW and DEH-P5730MP/XM/EW are constructed the same except for the following: Mark A
No.
Description
DEH-P5700MP/XM/EW
DEH-P5730MP/XM/EW
30 33 45 51 54
Chassis Unit Detach Grille Assy Sub Grille Assy Button(1-6) Cover
CXC3918 CXC3887 CXC3944 XAC7070 XNS7087
CXC3919 CXC3888 CXC3945 CAC9010 CNS8110
76 86
Sub Panel Unit Panel
XXA7361 XNS7088
CXC4367 CNS8330
B
C
D
E
F
10
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
11
1
2
3
4
2.3 CD MECHANISM MODULE 5 42 13
A
81 34
5
15
13
22
E
5
F
93 13
92
A B
44 5 54
1
13
C
G
83
86
68
D
52
B
26
82
86
53
28
I
H
4
28
37 71
4
23
1
55
4
1
2
J
87
36
5
45
50
73
23
72
18 29 51
64
38
K
10
47
75
1
C
I
2
24
76
B
49
1
7
61
E M
2
A
Q
27 8
H
21
G
L
M
1
57 D
90 48
1
79
77
F
1
63 2
59
N
D
O
R
16
17
12
1
58
67
J
3
1
78
33 P
2
62
46 60
20
2
80 40
1
6
1
N
1GEM1024 2GEM1045 3GEM1035
1
11
1
25
69
P
43
L
30
19
56
60
39
K
70 14
E
74 41
R
85
31
C
91
14
C
65 1
3
F
Q
35 O
85
31
2
66 85
12
DEH-P5700MP/XM/EW 1
2
3
4
89 10
5
6
7
8
CD MECHANISM MODULE SECTION PARTS LIST Mark No.
Description
Mark No.
Part No.
1 2 3 4 5
CD Core Unit(S10.1) Connector(CN101) Connector(CN901) Screw Screw
CWX3096 CKS4182 CKS4017 BMZ20P035FTC BSZ20P040FTC
6 7 8 9 10
Screw(M2x4) Screw(M2x3) Screw(M2x3) ••••• Washer
CBA1362 CBA1824 CBA1825
11 12 13 14 15
Washer Spring Spring Spring Spring
CBF1060 CBH2390 CBH2606 CBH2607 CBH2608
16 17 18 19 20
Spring Spring Spring Spring Spring
CBH2609 CBH2610 CBH2735 CBH2612 CBH2613
21 22 23 24 25
Spring Spring Spring Spring Spring
CBH2614 CBH2615 CBH2616 CBH2617 CBH2620
26 27 28 29 30
Spring Spring Spring Spring Spring
CBH2621 CBH2641 CBH2642 CBH2643 CBH2659
31 32 33 34 35
Spring ••••• Shaft Frame Frame
CBH2688
36 37 38 39 40
Bracket Bracket Arm Arm Lever
CND2712 CND1895 CNC9968 CND1909 CND2032
41 42 43 44 45
Lever Sheet Collar Guide Arm
CNC9984 CNM8134 CNV7798 CNV7799 CNV8403
46 47 48 49
Rack Holder Holder Arm
CNV8374 CNV8376 CNV8377 CNV8378
CBF1038
CLA4441 CNC9962 CNC9963
Description
Part No.
50
Gear
CNV8379
51 52 53 54 55
Gear Gear Gear Gear Gear
CNV8380 CNV8381 CNV8382 CNV8383 CNV8384
56 57 58 59 60
Rack Arm Arm Guide Roller
CNV8385 CNV8386 CNV8387 CNV8388 CNV7218
61 62 63 64 65
Gear Arm Arm Arm Damper
CNV8389 CNV8391 CNV8390 CNV8392 CNV7313
66 67 68 69 70
Damper Arm Arm Guide Guide
CNV7314 CNV8394 CNV8395 CNV8396 CNV8397
71 72 73 74 75
Holder Arm Gear Damper Motor Unit(M1)
CNV8398 CNV8402 CNV8400 CNV7618 CXC4440
76 77 78 79 80
Chassis Unit Screw Unit Gear Unit Arm Unit Arm
CXC2318 CXB8729 CXC2397 CXC2316 CND1896
81 82 83 84 85
Arm Motor Unit(M2) Bracket ••••• Screw(M2x5)
CND1894 CXB8933 CNC9985
86 87 88 89 90
Screw Screw ••••• Washer Pickup Unit(P10)(Service)
YE20FTC CXX1641
91 92 93
Screw Spring Clamper
IMS26P030FTC CBL1635 CNV8372
6
B
C
D
EBA1028 JFZ20P020FTC JGZ17P022FTC
E
F
DEH-P5700MP/XM/EW 5
A
7
8
13
1
2
3
4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 3.1 BLOCK DIAGRAM A TUNER AMP UNIT
5V
OSC
B
ANTENNA
TUNPDI
RDS_HSLK
RDS_CK
LDET
RDS_DATA
18 19 20 21 RDS_LOCK
14 DO
11
CE1
DI
IC3 EEPROM 5.0V
CK
10 9 8
SL
ROM_VDD
WC
5
LDET
TUNPDO
CE2
13
CE2
7 6
FM/AM TUNER UNIT
TUNPCK
VDD
IC5 3.3V ←
A
LPF
CN401 AM ANT
1
1
FMRF
ATT Rch
2,3
3
IC1 3.3V
FM ANT ATT FMRF
RDS_HSLK Lch
MIXER, IF AMP
23
DET, FM MPX, RDS DECODER
RF adj
ANT adj
RDS_DATA
24
IC2 2.5V
5
7 IC431 NJM4558MD RDS_CK RDS_LOCK
T51
CF52
AUDIOGND
NC
15
22
16
VDD_3.3
DGND
12
VCC
OSCGND
2
4
ELE SO
IC4 3.3V 2.5V 2.5V ←
C
RFGND
CF51
3.3V
TUN L
3
IN2
17
6 TUN3.3V
5
SYS+B 4
CN101 IP-BUS
IN4 IN3
EVCK EVDT EVST
CDL
IN4
11 BUSL7 BUSL+
Q101 8
B.UP
Q102 71
ASENBO
C CD CORE UNIT(S10.1)
PICKUP UNIT (P10)(SERVICE)
D
5
5
1
6
BUSBUS+
DIN1
IC101 HA12240FP
DOUT STBY
V3R3D
86
2
85
8
24
LDMD
15
15
5
5
142 Q101 143
FOCUS ACT. MONITOR TRACKING ACT. DIODE
TX RX IPPW
LD+
14
1 4
M
M2 LOADING/CARRIAGE MOTOR
M
LOUT
31
10
14
15
9
IC601(2/2) PE5464A
CDL
LOUT
FOP TOP FD,TD
14
SD,MD
X701
12 FOP 13 TOP M1 SPINDLE MOTOR
SYSTEM CONTRO CN721
CN901 RF AMP, CD DECODER, LOUT MP3 AND WMA DECODER, DIGITAL SERVO/DATA PROCESSOR
E,F FOP 1 TOP 4
IC201 UPD63763GJ
LD PD
AC,BD
HOLOGRAM UNIT
12
16 SOP 15 SOM 18 LCOP 17 LCOM
13
X1
CD DRIVER LOEJ CONT
22
53
9
47
X2
MICRO COMPUTER reset
LOEJ
RESET
14
IC701 PE5454A
31 30 97
BRST,BRXEN,BSRQ
VD
12EJ 8EJ DSCSNS
3
BRST,BRXEN,BSRQ,BDATA,BSCK
VDCONT CD3VON
3
21
4
20
Q751
VD1
B.UP 3
49 46
1
4
2
5 VDCONT
19
S905 S901 S903 8EJ DSCSNS HOME
IC203 NJM2885DL1-33
Q753
HOME
Q761 VD2
V3R3D
A
5
VDCONT
S904 12EJ
RST2
BDATA,BSCK VD
32
RESET
CONT
IC301 BA5835FP
2
22
1
23
5
19
VD2
Q762
VD2
CD3VON
3.3V REGULATOR
CD3VON
3V REGULATOR
F 3VDD
3
IC703
2
VDD
VDD
S-812C33AUA-C2N VDD
14
ASENBO
CN101
LASER DIODE
E
1
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
CN671
WIRED REMOTE CONTROL
2
A
3 1
CN351 RESET A
1
RST2
IC651 BD4834G
2
VDD
Q352
58
Q351
RESET
11
TUNPDO
98
LDET
88
TUNPDI
94
SL
74
STRKEY2 STRKEY1
CE1 CE2
8
REAR OUTPUT
FL
4
FRONT OUTPUT
75
TUNPDO
SP601
LDET TUNPDI
PEE
100
SL 97 TUNPCK 99 TUNPCE 32 TUNPCE2
TUNPCK
RL
VDD 5V REG Q901
B
VDD Q902
SYSTEM CONTROLLER
Q421 RDS_DATA
45
RDS_HSLK
42
IC601(1/2) PE5464A
RDT
DALMON
10
RDS57K
BACKUP SENSE
Q422 RDS_CK
89
RDS_LOCK
44 RDSLK
BSENS
RCK
ASENS
93
BSENS
92
ASENS
CN981
B.UP
FUSE
16
16
BACK UP
10A
Q931
ACC
14
14
ACC
TEL IN TELIN
Q951
ACC SENSE
7
VDD 15
15
9
9
7
7
FL-
5
5
FL+
8
RLRL+
GND
B.UP
AMP ELECTRONIC VOLUME/ SOURCE SELECTOR TUN L
3
IN2-L
F_Lch
IC231 PML003AM R_Lch
6 5
10
14
11
12
RLIN
IC301 PAL007A
FLIN
6
FLFL+ RL-
IN4-L
RL+
IN4+L
22
MUTE
23 21 3
8
5
25
6
6
11
11
C
B.REM
SYS+B
Q371
Q391
B.UP
TUN 3V REG.
B.UP
IC921 NJM2391DL1-33
3
TUN3.3V
SYS 8V REG. 1
2
Q301
SYSPW
TEL
MUTE
MUTE
IC911 NJM2388F84
1
B.UP
4
37
SYSPW
MUTE
B.REMOTE
STBY 4
IN3-L
EVCK, EVDT, EVST
4
20
VCC3/4 VCC1/2
21
SYSPW BACK UP B. REM
GND ACC
RR FR FL RL -
RR + FR + FL + RL +
D
M CONTROLLER IC601(2/2) PE5464A
X1 X2
16
15
X601 12.58291MHz
D CN831
B
PANEL UNIT
CN1950
CN1951
KEYBOARD UNIT
CN1
Q871 ILB
B.UP
10
ILMPW
EJECTIN
ILB
10
5
8
BL+B
S1-5,S7-9,S12-14,S18
S1970
Q872
E
20
8
EJSW
8
8
5
5
2
2
Q861 EJILP
B.UP
EJECT
Q862 FLPILM
9 Q851 SWVDD
VDD Q852 SWVDD ROT1 ROT0 CSENS DPDT KYDT DSENS
SWVDD
KEY MATRIX 2
11
SWVDD SWVDD
1
VOLUME S19
56
ROT1
12
12
57
ROT0
13
13
77
CSENS 6
6
DPDT
96 95
KYDT
11
11
14
14
ROT1 ROT0 CSENS DPDT KYDT
7
6
9
4
11
2
ROT1
1
ROT0
2
REM.CON. 3
IC2 1 TSOP4840SB1 17 KEY DATA
RFM
10
3
8
5
DPDT KYDT
S831
18 20
DPDT KYDT
LCD DRIVER/ KEY CONTROLLER IC1 PD6340A
10 VLCD 56 VDD
90
XO XI
22 23
X1 4.97MHz
F LCD1
DSENS
DEH-P5700MP/XM/EW 5
6
7
8
15
1
2
3
4
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE) Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST".
A-a
A
C CD-DA, MP3 : 0.2dB
CN901
B
swvdd
dalmon
IP-BUS : 2.2dB
8 9 10 11
C
5 6 7 1 2 3 4
FM(30%) : -27dB AM(30%) : -27dB IP-BUS : 2.2dB CD-DA, MP3 : 0.2dB
BEEP
mute
CSA30-201N
E
A-a
A-b
Large size SCH diagram
EJECT
B CN1 A-a
A-b
Guide page DSENS
F A-a
A-b
Detailed page
D
A D 16
PANEL UNIT
DEH-P5700MP/XM/EW 1
2
3
4
NC
NC
ASENSBO
TSI/BSI
TSCK/BSCK
NC
NC
FM(30%) : -26dB AM(30%) : -26dB
NC
FM/AM TUNER UNIT
D
5
6
7
8
A-b A
A TUNER AMP UNIT
FRONT R CH FRONT L CH
REAR R CH REAR L CH
>
B
FM(30%) : -4.66dB AM(30%) : -2.66dB IP-BUS : 9.54dB CD-DA, MP3 : 9.54dB
FM(30%) : -3.9dB AM(30%) : -1.9dB IP-BUS : 10.3dB CD-DA, MP3 : 10.3dB
swvdd
dalmon
C
BEEP
D >
NC
NC
ASENSBO
CEK1208 10A
FM(30%) : 22.1dB AM(30%) : 24.1dB IP-BUS : 36.3dB CD-DA, MP3 : 36.3dB
E
NOTE : Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors. Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors.
Decimal points for resistor and capacitor fixed values are expressed as : 2.2 ← 2R2 0.022 ← R022
F The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
RR FR FL RL -
BACK UP B. REM
GND ACC
DEH-P5700MP/XM/EW 5
6
7
8
RR + FR + FL + RL +
A 17
1
CN901
C
A-a A-b
mute
B FM(30%) : -27dB AM(30%) : -27dB IP-BUS : 2.2dB CD-DA, MP3 : 0.2dB
2
2
3
A-a
3
5 6 7 1 2 3 4
IP-BUS : 2.2dB
A-b dalmon
8 9 10 11
18
CD-DA, MP3 : 0.2dB
1 4
A
1
C
D
E
F
DEH-P5700MP/XM/EW
4
5
6
7
8
DEH-P5700MP/XM/EW
19
A-a D
FM(30%) : -26dB AM(30%) : -26dB
FM/AM TUNER UNIT
F CSA30-201N
E D A-a A-b
CN1
B
D PANEL UNIT
EJECT
C
DSENS
mute
B NC NC NC
TSCK/BSCK TSI/BSI
A-b
ASENSBO
dalmon
2
4
3
A NC
NC
5
6
7
8
BEEP
FM(30%) : -3.9dB AM(30%) : -1.9dB IP-BUS : 10.3dB CD-DA, MP3 : 10.3dB
A-a A-b
A
A-b
20
dalmon
B
1
2
FM(30%) : -4.66dB AM(30%) : -2.66dB IP-BUS : 9.54dB CD-DA, MP3 : 9.54dB
REAR L CH
REAR R CH
FRONT L CH
FRONT R CH
A
>
TUNER AMP UNIT
1 2 3
3
4
C
D
E
F
1
DEH-P5700MP/XM/EW
4
swvdd
BEEP
5
6
2
3
7 A-a A-b
4
DEH-P5700MP/XM/EW
8
GND ACC
B. REM
RR FR FL RL -
RR + FR + FL + RL +
7
BACK UP
Decimal points for resistor and capacitor fixed values are expressed as : 2.2 ← 2R2 0.022 ← R022
FM(30%) : 22.1dB AM(30%) : 24.1dB IP-BUS : 36.3dB CD-DA, MP3 : 36.3dB
6
The > mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
NOTE : Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors. Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors.
> CEK1208 10A
5 8
A
B
C
D
E
NC
F
dalmon
ASENSBO
A-b
21
NC
swvdd
1
2
3
4
3
4
3.3 KEYBOARD UNIT A
B
CAW1851
C
LCD DRIVER/ KEY CONTROLLER
D
E
F
B 22
DEH-P5700MP/XM/EW 1
2
5
6
7
8
A
KEYBOARD UNIT
CN1951
B
B
D
DISPLAY
C
FUNCTION
LOUDNESS
D
E
VOLUME
: The power supply is shown with the marked box.
F
B DEH-P5700MP/XM/EW 5
6
7
8
23
1
2
3
4
3.4 CD MECHANISM MODULE(GUIDE PAGE) A
F
T
C
S
C-a
PICKUP UNIT(P10)(SERVICE) %
B
F F F T T
T F T
#
T F
@
F T
C
D
3 $
2
S
T
1
7
9 C F
E
8 0
M1 CXC4440 SPINDLE MOTOR
4
5
TY
S S
F F
C
T
S
C
CD DRIVER
C
M2 CXB8933 LOADING /CARRIAGE MOTOR
S
T
C
F
C 24
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
A
C-b
SWITCHES: CD CORE UNIT(S10.1) S901:HOME SWITCH..........ON-OFF S903:DSCSNS SWITCH......ON-OFF S904:12EJ SWITCH.............ON-OFF S905:8EJ SWITCH...............ON-OFF
ras
B
The underlined indicates the switch position.
SIGNAL LINE F T C S
!
FOCUS SERVO LINE TRACKING SERVO LINE CARRIAGE SERVO LINE SPINDLE SERVO LINE
C
CD CORE UNIT(S10.1)
3.3V REGULATOR
C
D
SRAMLEVEL2
MICRO COMPUTER
A
3V REGULATOR
SRAMLEVEL1
CN721
SRAMLEVEL0
E 6
TYPE_A/D
^
&
F
C DEH-P5700MP/XM/EW 5
6
7
8
25
F
C-a
26
PICKUP UNIT(P10)(SERVICE)
E
1
2
3 T
# @
C
F
F
2
T
T
T
T
T
B
F
F
%
C-b
F
F
C-a A-a C-b
1 3 4
A
1 2
D
DEH-P5700MP/XM/EW
4
F
T
C
S
5
6
C
C T
T
F
F
0
9 8
7
$
4
7
4 5
7 C-a A-a C-b
CD DRIVER
5
C
S
3
S
S
F
T
6
M2 CXB8933 LOADING /CARRIAGE MOTOR
M1 CXC4440 SPINDLE MOTOR
1
2
3
2
C
5 8
A
6
C-b
B
C
D
E
F
C-a
DEH-P5700MP/XM/EW
8
27
C
S
S
ras
!
C-a C-b
C
C-b
28
1
2 S
C
T
F
B
2
3.3V REGULATOR
C CD CORE UNIT(S10.1)
SPINDLE SERVO LINE
CARRIAGE SERVO LINE
TRACKING SERVO LINE
FOCUS SERVO LINE
SIGNAL LINE
The underlined indicates the switch position.
SWITCHES: CD CORE UNIT(S10.1) S901:HOME SWITCH..........ON-OFF S903:DSCSNS SWITCH......ON-OFF S904:12EJ SWITCH.............ON-OFF S905:8EJ SWITCH...............ON-OFF
1 3
3
4
A
D
E
F
1
2
DEH-P5700MP/XM/EW
4
TYPE_A/D
MICRO COMPUTER
2
5
3
6 SRAMLEVEL0
SRAMLEVEL1
SRAMLEVEL2
C-a C-b
3V REGULATOR
6
&
^
6
CN721
A
5 7
4
7
8
A
B
C
D
E
F
5
6
C-b
DEH-P5700MP/XM/EW
8
29
1
2
- Waveforms A
1 DSCSNS 2 8SNS 3 12SNS 4 LOEJ
B
500ms/div 1 DSCSNS 5 CLCONT 4 LOEJ 6 VD
5V/div 5V/div 5V/div 10V/div
500ms/div 1 DSCSNS 2 8SNS 3 12SNS 4 LOEJ
5V/div 5V/div 5V/div 5V/div
8 cm CD Loading operation
Ref.: GND
Ref.: GND
Ref.: GND
Mode: Normal
Mode: Normal
Mode: Normal
1V/div 2s/div 500mV/div 500mV/div
7 SIN 8 CIN 9 TIN
7 SIN 8 CIN 9 TIN
1V/div 1s/div 500mV/div 500mV/div
500ms/div
1V/div 2s/div 500mV/div 500mV/div
12 cm CD-DA setup operation after loading
12 cm CD-ROM(1 session) setup operation after loading
12 cm CD-ROM(3 sessions) setup operation after loading
Ref.: REFO
Ref.: REFO
Ref.: REFO
Mode: Normal
Mode: Normal
Mode: Normal
200mV/div 500ms/div @ TE 2V/div # FE 2V/div
500mV/div 200ms/div # FE 500mV/div 0 FIN @ TE 9 TIN
12 cm CD-DA Source On setup operation
Source On setup operation
Ref.: REFO
Ref.: REFO
Ref.: REFO
Mode: Normal
Mode: Normal
Mode: Normal
# FE 0 FIN @ TE 9 TIN
E
Note : 1. The encircled numbers denote measuring points in the circuit diagram. 2. Reference voltage REFO1(1.65V)
12 cm CD Loading operation
0 FIN ! RFOK 7 SIN
D
4
12 cm CD Loading operation
7 SIN 8 CIN 9 TIN
C
5V/div 5V/div 5V/div 5V/div
3
500mV/div 20ms/div 500mV/div 500mV/div 500mV/div
$ MDX 7 SIN
500mV/div 20ms/div 500mV/div 500mV/div 500mV/div
CD-DA Play operation
1V/div 50ms/div 200mV/div
$ MDX 7 SIN
2V/div 1V/div
5µs/div
CD-ROM play operation(Regular track Jump)
Spindle waveform during play operation
Spindle waveform during play operation (Wider)
Ref.: REFO
Ref.: REFO
Ref.: REFO
Mode: Normal
Mode: Normal
Mode: Normal
F
30
DEH-P5700MP/XM/EW 1
2
3
4
5
0 FIN # FE
6
500mV/div 200ms/div @ TE 500mV/div % RFAGC
7
500mV/div 2ms/div 500mV/div
% RFAGC @ TE 9 TIN
8
1V/div 500µs/div 500mV/div 500mV/div
Focus Search waveform
Track Open waveform
1 Track Jump waveform
Ref.: REFO
Ref.: REFO
Ref.: REFO
Mode: TEST
Mode: TEST
Mode: TEST
A
B
% RFAGC @ TE 9 TIN
1V/div 500µs/div % RFAGC 500mV/div @ TE 500mV/div 9 TIN
1V/div 1ms/div 500mV/div 500mV/div
% RFAGC @ TE 9 TIN
1V/div 2ms/div 500mV/div 500mV/div
4 Tracks Jump waveform
10 Tracks Jump waveform
32 Tracks Jump waveform
Ref.: REFO
Ref.: REFO
Ref.: REFO
Mode: TEST
Mode: TEST
Mode: TEST
C
% RFAGC @ TE 8 CIN 7 SIN
200ms/div ^ LOUT 1V/div 1V/div & ROUT 500mV/div 2V/div
Search operation(Outter to Inner)
1V/div 1V/div
200µs/div 1 DSCSNS 2 8SNS 3 12SNS 4 LOEJ
Analog audio waveform
5V/div 5V/div 5V/div 5V/div
500ms/div
12 cm CD Eject operation
D Ref.: REFO
Ref.: AGND
Ref.: GND
Mode: Normal
Mode: Normal
Mode: Normal
1 DSCSNS 5V/div 5 CLCONT 5V/div 4 LOEJ 5V/div
500ms/div 1 DSCSNS 2 8SNS 3 12SNS 4 LOEJ
5V/div 5V/div 5V/div 5V/div
500ms/div 7 SIN 8 CIN 9 TIN
1V/div 500ms/div 500mV/div 500mV/div E
12 cm CD Eject operation
8 cm CD Eject operation
CD-DA >> CD-ROM mode change(Band key)
Ref.: GND
Ref.: GND
Ref.: REFO
Mode: Normal
Mode: Normal
Mode: Normal
F
DEH-P5700MP/XM/EW 5
6
7
8
31
1
7 SIN 8 CIN 9 TIN
A
2
3
1V/div 500ms/div % RFAGC 500mV/div 9 TIN 500mV/div @ TE 0 FIN
1V/div 1V/div 1V/div 1V/div
CD-ROM >> CD-DA mode change(Band key)
Black dot(800µm) during play
Ref.: REFO
Ref.: REFO
Mode: Normal
Mode: Normal
4
500µs/div
B
C
D
E
F
32
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
33
1
2
3
4
4. PCB CONNECTION DIAGRAM 4.1 TUNER AMP UNIT
A
NOTE FOR PCB DIAGRAMS 1.The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic diagram. 2.Viewpoint of PCB diagrams
A
TUNER AMP UNIT 150 WIRED REMOTE CONTROL 1
140
Capacitor
Connector
CORD ASSY
IP-BUS
16
14
12
10
8
6
4
2
15
13
11
9
7
5
3
1
2
SIDE A
4
3
2
130
7
B
11 10 9
Chip Part
P.C.Board
1
3 6
5 8
SIDE B 120
110
100 C
90
80
70 D
60
50
40 E
C CN901 30
20
10 F
DSENS
Y
A 34
0
X
10
20
30
40
50
60
DEH-P5700MP/XM/EW 1
2
3
4
70
5
6
7
8
A
SIDE A REAR OUTPUT FRONT OUTPUT
4
2
3
1
3
1
4
7
2
5
8
6
B
ANTENNA 2
1
FM/AM TUNER UNIT
C
D
E
D
CN1950
F
FRONT 70
80
90
100
110
120
130
140
150
160
A
170
DEH-P5700MP/XM/EW 5
6
7
8
35
1
A
A
2
3
4
TUNER AMP UNIT
1
B
C
D
E
F
A 36
170
160
150
140
130
120
110
100
DEH-P5700MP/XM/EW 1
2
3
4
90
5
6
7
8
A
SIDE B 150
1
140
1
130 B
120
110
100 C
90
80
70 D
60
50
40 E
30
20
10 F
Y 90
80
70
60
50
40
30
20
10
X
A
0
DEH-P5700MP/XM/EW 5
6
7
8
37
B
38
1
2
0
0
X
20 30
E 1
60
2
D
3
50 70
3
80
90
4
5
100
110
6
120
BAND
130
140
DOWN
RIGHT
150
LOUDNESS
LEFT
UP
160
KEYBOARD UNIT
40
SOURCE
EQ
AUDIO
FUNCTION
A
10
DISPLAY
VOLUME
2
Y
10
TA
B
20
30
B
40
1 3 4
4.2 KEYBOARD UNIT SIDE A
C
F
DEH-P5700MP/XM/EW
4
5
KEYBOARD UNIT
7
8
SIDE B
160
B
6
A
150 140
D
CN1951
130 B
120 110 100 C
90 80 70 D
60 50 40 E
30 20 10
X F
0 40
30
20
Y
10
0
B
DEH-P5700MP/XM/EW 5
6
7
8
39
1
2
3
4
4.3 CD CORE UNIT(S10.1)
C
CD CORE UNIT(S10.1)
SIDE A
A
M2 LOADING /CARRIAGE MOTOR
B
M1 SPINDLE MOTOR
A
C
PICKUP UNIT(P10)(SERVICE)
CN721
D
HOME
E
FE REFO1
F
C 40
DEH-P5700MP/XM/EW 1
2
3
4
5
C
6
7
CD CORE UNIT(S10.1)
8
SIDE B A
8EJ
12EJ
DSCSNS B
C
D
E
F
C DEH-P5700MP/XM/EW 5
6
7
8
41
1
2
3
4
4.4 PANEL UNIT A
D
SIDE A
PANEL UNIT
D
SIDE B
PANEL UNIT
B
B
A
CN1
CN831
EJECT
C
D
E
F
D 42
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
5. ELECTRICAL PARTS LIST NOTE: • Parts whose parts numbers are omitted are subject to being not supplied. • The part numbers shown below indicate chip components. Chip Resistor RS1/_S___J,RS1/__S___J Chip Capacitor (except for CQS.....) CKS....., CCS....., CSZS..... • The > mark found on some component parts indicatesthe importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. • Meaning of the figures and others in the parentheses in the parts list. Example) IC 301 is on the point (face A, 91 of x-axis, and 111 of y-axis) of the corresponding PC board. IC 301 (A, 91, 111) IC NJM2068V Circuit Symbol and No.
DEH-P5700MP/XM/EW Tuner Amp Unit : CWM9774 Keyboard Unit : NSP Panel Unit : CWM9781 CD Core Unit(S10.1) : CWX3096
DEH-P5730MP/XM/EW Tuner Amp Unit : CWM9774 Keyboard Unit : NSP Panel Unit : CWM9781 CD Core Unit(S10.1) : CWX3096
A Unit Number:CWM9774 Unit Name:Tuner Amp Unit MISCELLANEOUS IC 101 IC 231 IC 301 IC 431 IC 601
(A,58,64) IC (B,86,86) IC (A,104,139) IC (A,147,43) IC (A,96,46) IC
HA12240FP PML003AM PAL007A NJM4558MD PE5464A
IC 651 IC 911 IC 921 Q 101 Q 102
(A,54,73) IC (A,5,120) IC (B,159,27) IC (A,45,85) Transistor (A,46,82) Transistor
BD4834G NJM2388F84 NJM2391DL1-33 2SA1576 DTC124EU
Q Q Q Q Q
301 351 352 371 391
(A,128,122) (A,141,128) (A,157,127) (B,137,115) (A,118,111)
DTC124EU UMH3N UMH3N UMD2N 2SC4081
Q Q Q Q Q
421 422 751 753 761
(A,146,50) Transistor (A,149,54) Transistor (A,6,70) Transistor (B,26,55) Transistor (B,28,33) Transistor
UMH1N UMH1N 2SD2396 UMD2N 2SA1577
(B,22,33) Transistor (B,65,35) Transistor
DTC114EU 2SA1576
Q 762 Q 851
Transistor Transistor Transistor Transistor Transistor
Circuit Symbol and No.
Part No.
B
Part No.
Q 852 Q 861 Q 862
(B,63,30) Transistor (A,45,16) Transistor (A,41,16) Transistor
DTC114EU 2SA1576 DTC114EU
Q Q Q Q Q
871 872 901 902 931
(A,40,22) Transistor (A,36,13) Transistor (A,6,104) Transistor (B,31,69) Transistor (A,60,117) Transistor
2SB1238 DTC114EU 2SD2396 UMD2N UMX1N
Q D D D D
951 391 392 441 751
(A,56,106) Transistor (A,17,86) Diode (A,127,116) Diode (A,155,41) Diode (A,16,65) Diode
2SA1576 HZS7L(B2) DAN202U UDZS5R6(B) HZS9L(A1)
D D D D D
801 802 803 901 902
(B,120,29) Diode (B,108,29) Diode (B,66,27) Diode (A,29,79) Diode (A,32,75) Diode
UMZ6R8EN UMZ6R8EN UDZS10(B) HZS6L(B1) MPG06G-6415G50
D D D D D
921 931 932 951 971
(A,145,24) Diode (A,54,115) Diode (A,60,113) Diode (A,60,108) Diode (A,122,129) Diode
MPG06G-6415G50 HZU7L(C3) HZU7L(A1) DAN202U MPG06G-6415G50
D 972 D 981 D 982 ZNR401 L 101
(A,124,122) Diode (A,69,113) Diode (A,72,111) Diode (B,158,113) Surge Protector (A,77,65) Inductor
MPG06G-6415G50 MPG06G-6415G50 MPG06G-6415G50 CSA30-201N LAU2R2K
L L L L L
211 401 402 403 601
(A,60,87) Inductor (A,155,97) Ferri-Inductor (A,151,89) Inductor (A,151,67) Inductor (A,101,67) Inductor
LAU2R2K LAU4R7K LAU1R0K LAU1R0K LAU2R2K
L L L L X
701 851 951 981 601
(A,51,54) Inductor (A,71,29) Inductor (A,64,104) Inductor
C
D
E
LAU2R2K LAU2R2K LAU2R2K (A,32,107) Choke Coil 600µH CTH1291 (A,100,61) Radiator 12.58291MHz CSS1402 F
S 831 >FU351 SP601
(A,25,10) Switch(DSENS) (B,127,134) Fuse 3A (A,135,25) Buzzer
CSN1039 CEK1286 CPV1062
DEH-P5700MP/XM/EW 5
A
6
7
8
43
1
Circuit Symbol and No. Y 401 > A
B
C
D
E
F
2
3
Part No.
(A,162,101) FM/AM Tuner Unit CWE1645
Fuse 10A
CEK1208
RESISTORS R R R R R
101 102 103 104 105
(B,36,134) (B,36,135) (B,37,124) (B,36,137) (B,27,135)
RS1/16S150J RS1/16S470J RS1/16S101J RS1/16S101J RS1/16S181J
R R R R R
106 107 108 109 110
(B,31,121) (B,25,135) (B,29,121) (B,26,122) (B,27,121)
RS1/16S181J RS1/16S223J RS1/16S223J RS1/16S102J RS1/16S102J
R R R R R
111 113 114 211 271
(B,34,121) (A,42,83) (A,43,80) (A,104,75) (A,110,96)
RS1/16S222J RS1/16S332J RS1/16S562J RAB4C102J RS1/16S101J
R R R R R
272 273 274 277 278
(A,106,96) (A,111,96) (A,108,96) (A,112,99) (A,117,100)
RS1/16S101J RS1/16S101J RS1/16S101J RS1/16S0R0J RS1/16S0R0J
R R R R R
301 302 303 304 331
(B,118,125) (A,129,132) (A,129,134) (A,127,135) (A,106,110)
RS1/16S153J RS1/16S103J RS1/16S103J RS1/16S331J RSK1/16S471J
R R R R R
332 333 334 351 352
(A,102,110) (A,109,110) (A,104,110) (B,131,127) (B,141,129)
RSK1/16S471J RSK1/16S471J RSK1/16S471J RS1/16S821J RS1/16S821J
R R R R R
353 354 355 356 357
(B,141,123) (B,158,127) (B,129,130) (B,140,129) (B,143,123)
RS1/16S821J RS1/16S821J RS1/16S223J RS1/16S223J RS1/16S223J
R R R R R
368 371 372 391 392
(B,156,126) (B,142,109) (A,131,115) (A,121,111) (A,118,108)
RS1/16S223J RS1/16S102J RS1/16S0R0J RS1/16S104J RS1/16S104J
R R R R R
393 401 402 403 404
(A,130,130) (B,158,64) (B,157,81) (B,157,83) (B,157,86)
RS1/16S222J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J
R R R R R
405 407 408 421 422
(B,157,88) (B,157,90) (B,158,69) (A,145,59) (B,157,79)
RS1/16S681J RS1/16S681J RS1/16S0R0J RAB4C223J RS1/16S681J
R R R R R
431 432 433 434 435
(B,153,43) (B,153,41) (A,153,44) (A,153,42) (B,154,47)
RS1/16S103J RS1/16S103J RS1/16S103J RS1/16S103J RS1/16S103J
44
4
Circuit Symbol and No.
Part No.
R R R R R
436 437 438 441 601
(B,152,45) (B,146,47) (A,143,43) (A,155,45) (B,134,38)
RS1/16S103J RS1/16S103J RS1/16S103J RS1/16S681J RS1/16S102J
R R R R R
603 604 605 606 607
(B,97,54) (A,112,65) (B,102,57) (B,91,53) (A,72,60)
RS1/16S104J RS1/16S104J RS1/16S102J RS1/16S473J RS1/16S104J
R R R R R
610 611 612 613 616
(A,83,33) (A,83,34) (A,80,39) (A,103,33) (B,115,45)
RS1/16S103J RS1/16S473J RS1/16S104J RS1/16S103J RS1/16S472J
R R R R R
617 620 621 622 623
(A,116,43) (B,107,44) (B,119,45) (B,121,45) (B,124,45)
RS1/16S102J RS1/16S104J RS1/16S104J RS1/16S104J RS1/16S104J
R R R R R
624 625 626 627 640
(A,111,49) (A,111,51) (A,111,52) (A,96,33) (A,109,34)
RS1/16S681J RS1/16S681J RS1/16S681J RAB4C471J RS1/16S0R0J
R R R R R
651 652 671 672 701
(A,60,72) (A,59,73) (B,7,134) (B,5,134) (A,61,44)
RS1/16S183J RS1/16S102J RS1/16S102J RS1/16S102J RS1/16S221J
R R R R R
702 703 704 705 706
(A,61,35) (A,61,36) (A,61,47) (A,61,46) (A,61,38)
RS1/16S221J RS1/16S102J RS1/16S102J RS1/16S221J RS1/16S221J
R R R R R
707 708 712 731 732
(A,44,45) (A,61,41) (B,49,51) (A,67,52) (A,58,54)
RS1/16S221J RAB4C682J RS1/16S473J RS1/16S6800D RS1/16S6800D
R R R R R
733 734 751 761 762
(A,67,56) (A,61,56) (A,16,57) (B,30,36) (B,25,30)
RS1/16S4700D RS1/16S4700D RD1/4PU102J RS1/16S103J RS1/16S152J
R R R R R
801 802 803 804 805
(A,127,27) (A,125,27) (A,78,27) (A,76,27) (A,74,27)
RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S222J
R R R R R
835 836 838 839 851
(A,105,29) (A,100,26) (A,103,29) (A,100,28) (B,61,34)
RS1/16S222J RS1/16S104J RS1/16S222J RS1/16S104J RS1/16S473J
R R R R R
852 853 861 862 863
(B,60,31) (B,60,26) (A,49,16) (A,45,12) (A,41,12)
RS1/16S472J RS1/16S222J RD1/4PU391J RS1/16S473J RS1/16S103J
DEH-P5700MP/XM/EW 1
2
3
4
5
Circuit Symbol and No.
6
7
Part No.
Circuit Symbol and No.
8
Part No.
R R R R R
871 872 873 901 902
(A,36,18) (A,36,17) (A,36,15) (B,11,77) (B,14,75)
RS1/16S223J RS1/16S182J RS1/16S182J RS1/16S333J RS1/16S103J
C C C C C
361 401 402 403 404
(B,160,139) (B,165,59) (A,153,60) (B,165,64) (B,165,96)
CKSRYB104K25 CKSRYB103K50 CEJQ470M6R3 CKSRYB103K50 CKSRYB103K50
R R R R R
911 912 931 932 933
(B,6,110) (A,16,98) (A,57,115) (A,56,115) (A,64,115)
RS1/16S103J RS1/16S102J RS1/16S104J RS1/16S473J RS1/16S103J
C C C C C
405 407 411 412 431
(A,148,99) (B,158,60) (A,149,78) (B,140,65) (B,156,43)
CEJQ101M16 CKSYB475K10 CCSRCH101J50 CCSRCH101J50 CKSRYB474K10
R R R R R
934 935 951 952 953
(A,64,112) (A,62,115) (A,54,103) (A,53,107) (A,57,109)
RS1/16S473J RS1/16S472J RS1/16S102J RS1/16S472J RS1/16S472J
C C C C C
432 433 434 435 436
(B,156,41) (A,153,45) (A,153,41) (B,157,47) (B,156,45)
CKSRYB474K10 CCSRCH470J50 CCSRCH470J50 CKSRYB474K10 CKSRYB474K10
R 954 R 981
(A,58,103) (A,67,105)
RS1/16S153J RD1/4PU102J
C C C C C
437 438 441 442 602
(B,146,46) (A,141,43) (A,143,47) (A,153,39) (B,92,67)
CCSRCH470J50 CCSRCH470J50 CKSRYB105K10 CKSRYB105K10 CKSRYB105K10
C C C C C
603 604 605 606 607
(A,90,65) (B,101,58) (B,97,58) (B,91,55) (A,81,45)
CEJQ4R7M35 CCSRCH200J50 CCSRCH200J50 CKSRYB105K10 CKSRYB104K25
C C C C C
609 611 651 712 731
(A,114,58) (B,85,52) (A,64,72) (B,38,30) (A,66,54)
CCSRCH470J50 CCSRCH680J50 CKSRYB105K10 CCSRCH101J50 CCSQCH222J50
C C C C C
732 733 734 751 752
(A,62,54) (A,66,59) (A,62,59) (B,21,63) (B,15,54)
CCSQCH222J50 CCSQCH102J50 CCSQCH102J50 CKSRYB224K10 CKSRYB102K50
C C C C C
753 761 762 801 802
(A,15,51) (B,28,41) (A,29,44) (B,87,22) (B,89,22)
CEJQ101M16 CKSRYB473K50 CEAT471M16 CCSRCH220J50 CCSRCH220J50
C C C C C
803 804 805 901 902
(B,91,22) (B,93,22) (B,114,31) (A,16,70) (B,21,68)
CCSRCH220J50 CCSRCH220J50 CCSRCH220J50 CEJQ470M10 CKSRYB103K50
C C C C C
903 904 911 912 913
(B,34,81) (A,25,70) 470µF/16V (A,17,80) (B,9,116) (A,14,118)
CKSRYB472K50 CCH1331 CEJQ221M10 CKSRYB103K50 CEJQ101M16
C C C C C
921 922 923 931 981
(A,150,32) (B,155,32) (B,152,21) (A,62,112) (B,58,122)
CEJQ220M10 CKSRYB103K50 CKSYB475K10 CKSRYB104K25 CKSRYB104K25
CAPACITORS C C C C C
101 103 104 105 106
(B,29,137) (A,59,69) (A,61,69) (B,38,127) (B,31,137)
CKSRYB104K25 CKSRYB102K50 CKSRYB102K50 CCSRCH101J50 CCSRCH101J50
C C C C C
107 108 201 202 203
(A,51,64) (B,45,65) (B,121,79) (B,121,75) (A,66,79)
CKSRYB472K50 CCSRCH680J50 CKSRYB105K10 CKSRYB105K10 CEJQ1R0M50
C C C C C
204 205 206 207 208
(A,67,92) (A,73,85) (A,73,91) (A,73,79) (A,72,97)
CEJQ1R0M50 CEJQ2R2M50 CEJQ2R2M50 CEJQ2R2M50 CEJQ2R2M50
C C C C C
211 212 213 231 232
(A,66,86) (B,72,89) (A,103,89) (B,97,87) (B,77,82)
CEJQ470M10 CKSRYB104K25 CEJQ100M16 CKSRYB105K10 CKSRYB105K10
C C C C C
233 234 301 302 303
(B,101,80) (B,73,83) (A,48,124) 3300µF/16V (B,105,144) (A,118,121)
CKSRYB153K50 CKSRYB153K50 CCH1486 CKSQYB105K16 CEHAR100M16
C C C C C
304 305 306 331 332
(A,112,130) (A,117,115) (A,109,130) (A,108,102) (A,103,102)
CKSQYB225K10 CEHAR330M10 CKSQYB225K10 CKSRYB474K10 CKSRYB474K10
C C C C C
333 334 335 336 337
(A,111,102) (A,105,102) (A,108,106) (A,102,106) (A,111,106)
CKSRYB474K10 CKSRYB474K10 CKSQYB474K16 CKSQYB474K16 CKSQYB474K16
C C C C C
338 351 352 353 354
(A,105,106) (A,134,127) (A,134,120) (A,141,120) (A,144,113)
CKSQYB474K16 CEJQ100M16 CEJQ100M16 CEJQ100M16 CEJQ100M16
6
B
C
D
E
B Unit Number:(P5700MP)
F
Unit Name:Keyboard Unit DEH-P5700MP/XM/EW
5
A
7
8
45
1
Circuit Symbol and No. MISCELLANEOUS A
B
2
3
Part No.
4
Circuit Symbol and No. 23 25 26 27
(B,13,35) (B,12,35) (B,123,35) (B,125,35)
RS1/16S181J RS1/16S181J RS1/16S222J RS1/16S222J
R R R R R
28 29 30 31 32
(B,33,11) (B,133,9) (B,15,35) (B,149,31) (B,122,8)
RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
R R R R R
33 34 35 36 38
(B,31,31) (B,98,5) (B,141,34) (B,76,4) (B,143,34)
RS1/16S151J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
R R R R R
39 40 41 42 43
(B,14,7) (B,9,7) (B,131,9) (B,129,9) (B,140,34)
RS1/16S181J RS1/16S181J RS1/16S151J RS1/16S151J RS1/16S104J
(B,15,7)
RS1/16S103J
IC 1 IC 2 D 1 D 2 D 3
(B,83,19) IC (A,19,35) IC (B,111,24) Diode (B,111,28) Diode (A,131,3) LED
PD6340A TSOP4840SB1 DAN202U DAP202U SML-310PT
D D D D D
4 5 6 7 9
(A,32,3) LED (A,132,30) LED (A,8,37) LED (A,132,15) LED (A,13,2) LED
SML-310PT SML-310PT SML-310PT SML-310PT SML-310PT
D D D D D
10 11 12 13 14
(A,150,2) LED (A,130,22) LED (A,13,34) LED (A,2,25) LED (A,155,37) LED
SML-310PT SML-310PT SML-310PT SML-310PT SML-310PT
D D D D X
16 17 20 21 1
(A,122,20) LED (A,30,20) LED (A,25,16) LED (A,13,8) LED
S S S S S
1 2 3 4 5
(A,150,13) Switch (A,126,3) Push Switch (A,89,3) Push Switch (A,37,3) Push Switch (A,150,30) Switch
CSG1107 CSG1174 CSG1174 CSG1174 CSG1107
S S S S S
6 7 8 9 10
(A,132,26) Push Switch (A,98,3) Push Switch (A,50,3) Push Switch (A,158,21) Switch (A,132,11) Push Switch
CSG1173 CSG1174 CSG1174 CSG1107 CSG1173
B Unit Number:(P5730MP)
S S S S S
11 12 13 14 15
(A,7,34) Push Switch (A,113,3) Push Switch (A,65,3) Push Switch (A,141,21) Switch (A,13,5) Push Switch
CSG1173 CSG1174 CSG1174 CSG1107 CSG1173
MISCELLANEOUS
NSCW505C-4234 NSCW505C-4234 SML-310PT SML-310PT (B,69,18) Ceramic Resonator 4.97MHz CSS1573
Part No.
R R R R
R 44
CAPACITORS
C
D
S 16 S 17 S 18 S 19 LCD1
C C C C
F
(B,27,31) (B,64,15) (A,132,33) (A,26,13)
CKSQYB475K6R3 CKSRYB224K10 CKSRYF104Z25 CKSRYF104Z25
Unit Name:Keyboard Unit
(A,130,18) Push Switch (A,150,5) Push Switch (A,74,3) Push Switch
CSG1173 CSG1173 CSG1174 (A,13,21) Encoder(VOLUME) XSD7001 (A,76,22) LCD CAW1851
RESISTORS
E
1 2 4 5
IC 1 IC 2 D 1 D 2 D 3
(B,83,19) IC (A,19,35) IC (B,111,24) Diode (B,111,28) Diode (A,131,3) LED
PD6340A TSOP4840SB1 DAN202U DAP202U SML-310VT
D D D D D
4 5 6 7 9
(A,32,3) LED (A,132,30) LED (A,8,37) LED (A,132,15) LED (A,13,2) LED
SML-310VT SML-310VT SML-310VT SML-310VT SML-310VT SML-310VT SML-310VT SML-310VT SML-310VT SML-310VT
R R R R R
6 7 8 9 10
(B,37,29) (B,34,29) (B,32,11) (B,30,11) (B,120,6)
RS1/16S121J RS1/16S2R2J RS1/16S181J RS1/16S181J RS1/16S181J
D D D D D
10 11 12 13 14
(A,150,2) LED (A,130,22) LED (A,13,34) LED (A,2,25) LED (A,155,37) LED
R R R R R
11 12 13 14 15
(B,152,11) (B,84,6) (B,82,6) (B,119,6) (B,151,11)
RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
D D D D X
16 17 20 21 1
(A,122,20) Diode (A,30,20) Diode (A,25,16) LED (A,13,8) LED
R R R R R
16 17 18 19 20
(B,57,4) (B,59,4) (B,152,30) (B,133,36) (B,154,30)
RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
S S S S S
1 2 3 4 5
(A,150,13) Push Switch (A,126,3) Push Switch (A,89,3) Push Switch (A,37,3) Push Switch (A,150,30) Push Switch
CSG1133 CSG1175 CSG1175 CSG1175 CSG1133
R 21
(B,132,36)
RS1/16S181J
S 6 S 7
(A,132,26) Push Switch (A,98,3) Push Switch
CSG1173 CSG1175
46
NSCW505C-4234 NSCW505C-4234 SML-310VT SML-310VT (B,69,18) Ceramic Resonator 4.97MHz CSS1573
DEH-P5700MP/XM/EW 1
2
3
4
5
Circuit Symbol and No.
6
7
Part No.
8
Circuit Symbol and No.
S 8 S 9 S 10
(A,50,3) Push Switch (A,158,21) Push Switch (A,132,11) Push Switch
CSG1175 CSG1133 CSG1173
Unit Number:CWM9781 Unit Name:Panel Unit
S S S S S
11 12 13 14 15
(A,7,34) Push Switch (A,113,3) Push Switch (A,65,3) Push Switch (A,141,21) Push Switch (A,13,5) Push Switch
CSG1173 CSG1175 CSG1175 CSG1133 CSG1173
MISCELLANEOUS
S 16 S 17 S 18 S 19 LCD1
(A,130,18) Push Switch (A,150,5) Push Switch (A,74,3) Push Switch
Part No.
A
D 1970 S 1970
(A,26,5) LED
CL220PGC
(A,5,78) Push Switch(EJECT) CSG1174
RESISTORS CSG1173 CSG1173 CSG1175 (A,13,21) Encoder(VOLUME) XSD7001 (A,76,22) LCD CAW1851
R 1970 R 1971
(B,35,18) (B,35,16)
RS1/16S101J RS1/16S101J
CAPACITORS
RESISTORS
C 1970
(B,39,64)
B
CKSRYB104K16
R R R R R
6 7 8 9 10
(B,37,29) (B,34,29) (B,32,11) (B,30,11) (B,120,6)
RS1/16S121J RS1/16S2R2J RS1/16S181J RS1/16S181J RS1/16S181J
C Unit Number:CWX3096
R R R R R
11 12 13 14 15
(B,152,11) (B,84,6) (B,82,6) (B,119,6) (B,151,11)
RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
MISCELLANEOUS
R R R R R
16 17 18 19 20
(B,57,4) (B,59,4) (B,152,30) (B,133,36) (B,154,30)
RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
R R R R R
21 23 25 26 27
(B,132,36) (B,13,35) (B,12,35) (B,123,35) (B,125,35)
RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S222J RS1/16S222J
R R R R R
28 29 30 31 32
(B,33,11) (B,133,9) (B,15,35) (B,149,31) (B,122,8)
RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
R R R R R
33 34 35 36 38
(B,31,31) (B,98,5) (B,141,34) (B,76,4) (B,143,34)
RS1/16S151J RS1/16S181J RS1/16S181J RS1/16S181J RS1/16S181J
R R R R R
39 40 41 42 43
(B,14,7) (B,9,7) (B,131,9) (B,129,9) (B,140,34)
RS1/16S181J RS1/16S181J RS1/16S151J RS1/16S151J RS1/16S104J
(B,15,7)
RS1/16S103J
Unit Name:CD Core Unit(S10.1)
IC 201 IC 203 IC 301 IC 701 IC 703
(A,39,24) (B,45,78) (A,49,88) (A,48,51) (A,30,44)
IC IC IC IC IC
UPD63763GJ NJM2885DL1-33 BA5835FP PE5454A S-812C33AUA-C2N
Q Q L L L
101 701 203 207 209
(A,20,22) (B,62,59) (A,53,32) (A,53,31) (A,26,20)
Transistor Transistor Inductor Inductor Inductor
2SA1577 UN2111 CTF1389 CTF1389 CTF1389
L X X S S
703 201 701 901 903
(A,64,49) Inductor
S 904 S 905
C
CTF1389
(A,51,35) Ceramic Resonator 16.934MHz CSS1603 (A,59,53) Ceramic Resonator 4.00MHz CSS1652
(A,15,43) Switch(HOME) CSN1067 (B,53,100) Switch(DSCSNS) CSN1068 (B,35,108) Switch(12EJ) (B,48,109) Switch(8EJ)
D
CSN1067 CSN1067
RESISTORS
R 44
1 2 4 5
(B,27,31) (B,64,15) (A,132,33) (A,26,13)
CKSQYB475K6R3 CKSRYB224K10 CKSRYF104Z25 CKSRYF104Z25
D
101 102 103 201 202
(A,22,24) (A,22,26) (A,25,25) (A,53,16) (A,55,21)
RS1/10SR2R4J RS1/10SR2R4J RS1/10SR2R7J RS1/16SS102J RS1/16SS333J
R R R R R
221 222 225 226 227
(B,31,18) (B,26,18) (A,27,8) (A,27,7) (B,33,10)
RS1/16SS103J RS1/16SS103J RS1/16SS103J RS1/16SS393J RS1/16SS562J
R R R R R
228 229 232 241 243
(B,36,8) (B,34,8) (B,35,10) (B,42,28) (B,44,28)
RS1/16SS122J RS1/16SS472J RS1/16SS122J RS1/16SS333J RS1/16SS333J
R R R R
245 301 302 304
(A,39,38) (A,48,78) (A,42,78) (A,50,78)
RS1/16SS333J RS1/16SS183J RS1/16SS822J RS1/16SS183J
E
CAPACITORS C C C C
R R R R R
DEH-P5700MP/XM/EW 5
6
7
8
F
47
1
Circuit Symbol and No.
A
B
C
D
E
2
3
Part No.
R 305
(A,42,77)
RS1/16SS822J
R R R R R
307 308 309 310 601
(A,36,85) (A,32,83) (A,38,89) (A,35,88) (B,43,59)
RS1/16SS183J RS1/16SS183J RS1/16SS183J RS1/16SS183J RS1/16S101J
R R R R R
602 606 607 608 705
(B,41,62) (B,44,67) (B,43,56) (B,36,67) (B,50,59)
RS1/16S101J RS1/16S0R0J RS1/16SS0R0J RS1/16SS0R0J RS1/16SS221J
R R R R R
706 707 708 710 711
(B,57,61) (A,62,47) (B,50,57) (A,28,77) (B,44,53)
RS1/16SS221J RS1/16SS473J RS1/16SS221J RS1/16SS102J RS1/16SS221J
R R R R R
714 716 719 720 724
(B,51,53) (A,63,56) (B,49,45) (B,46,52) (A,62,42)
RS1/16SS473J RS1/16SS472J RS1/16SS221J RS1/16SS471J RS1/16S473J
R R R R R
725 726 727 729 730
(B,57,43) (A,52,41) (B,50,54) (A,57,40) (A,65,41)
RS1/16SS222J RS1/16SS103J RS1/16SS473J RS1/16SS223J RS1/16SS473J
R R R R R
731 737 740 742 746
(A,53,41) (A,41,42) (A,35,46) (A,50,41) (B,60,56)
RS1/16SS104J RS1/16SS104J RS1/16SS473J RS1/16SS104J RS1/16SS104J
R R R R R
750 754 755 765 769
(A,39,59) (B,48,60) (A,43,61) (B,51,40) (B,48,40)
RS1/16SS473J RS1/16SS102J RS1/16SS102J RAB4CQ221J RAB4CQ221J
R R R R R
773 777 778 779 901
(B,39,37) (B,48,51) (B,48,52) (B,45,54) (B,52,65)
RAB4CQ221J RS1/16SS221J RS1/16SS221J RS1/16SS221J RAB4CQ221J
R R R R R
905 906 908 910 911
(B,54,60) (B,56,68) (B,45,69) (B,44,69) (B,40,73)
RS1/16SS221J RS1/16SS221J RS1/16SS0R0J RS1/16SS0R0J RS1/16SS102J
CAPACITORS
F
103 105 108 110 201
(B,14,8) 100µF/16V (A,19,15) (B,39,16) (A,18,6) (A,51,14)
CCH1504 CKSSYB104K10 CKSSYB104K10 CKSSYB104K10 CKSSYB102K50
C C C C C
202 203 204 205 208
(B,50,17) (A,55,23) (B,28,22) (A,53,25) (B,44,25)
CKSSYB104K10 CKSSYB104K10 CEVW220M6R3 CKSSYB104K10 CKSSYB104K10
C 209
(A,54,29)
CKSSYB104K10
48
Circuit Symbol and No.
Part No.
C C C C
212 216 217 218
(A,45,37) (A,25,8) (A,28,12) (A,25,7)
CKSRYB105K10 CKSSYB332K50 CKSSYB104K10 CKSSYB473K10
C C C C C
219 220 221 222 223
(A,34,7) (A,33,11) (B,35,6) (B,35,8) (B,33,8)
CKSSYB104K10 CKSSYB182K50 CKSSYB104K10 CCSSCH560J50 CCSSCH4R0C50
C C C C C
224 225 226 227 228
(B,40,16) (B,45,14) (B,43,12) (A,45,10) (A,49,9)
CKSSYB104K10 CKSSYB103K16 CCSSCH680J50 CCSSCH470J50 CKSSYB103K16
C C C C C
234 237 239 242 243
(B,36,81) (B,38,29) (B,34,10) (B,58,32) (B,39,76)
CEVW221M4 CKSSYB104K10 CCSSCH220J50 CKSSYB104K10 CKSSYB104K10
C C C C C
244 246 251 260 301
(B,49,70) (A,23,19) (B,28,31) (A,54,25) (A,43,78)
CKSSYB104K10 CKSSYB104K10 CKSRYB102K50 CKSSYB104K10 CKSSYB221K50
C C C C C
302 303 304 305 307
(A,50,79) (A,37,85) (A,39,89) (B,34,92) (B,56,90)
CKSSYB221K50 CKSSYB472K25 CKSSYB103K16 CEVW101M16 CKSSYB104K10
C C C C C
601 602 701 703 706
(B,46,60) (B,41,65) (A,64,46) (B,50,61) (B,50,62)
CCSRCH102J50 CCSRCH102J50 CKSSYB104K10 CKSSYB103K16 CKSSYB104K10
C C C C C
707 712 714 716 722
(A,36,45) (A,22,42) (B,60,45) (A,61,40) (B,52,48)
CKSSYB104K10 CKSRYB224K16 CKSSYB104K10 CKSSYB103K16 CKSQYB475K6R3
C C C C C
723 903 906 907 910
(A,26,41) (B,56,70) (A,40,77) (A,47,76) (B,60,71)
CKSRYB105K10 CKSSYB471K50 CKSRYB224K16 CKSSYB103K16 CKSQYB225K10
Miscellaneous Parts List Pickup Unit(P10)(Service) Motor Unit(SPINDLE)
CXX1641 CXC4440 Motor Unit(LOADING/CARRIAGE) CXB8933
M 1 M 2
C C C C C
4
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
6. ADJUSTMENT 6.1 CD ADJUSTMENT A
1) Cautions on adjustments • In this product the single voltage (3.3V) is used for the regulator. The reference voltage is the REFO1 (1.65V) instead of the GND. If you should mistakenly short the REFO1 with the GND during adjustment, accurate voltage will not be obtained, and the servo’s misoperation will apply excessive shock to the pickup. To avoid such problems: a. Do not mix up the REFO1 with the GND when connecting the (-) probe of measuring instruments. Especially on an oscilloscope, avoid connecting the (-) probe for CH1 to the GND. b. In many cases, measuring instruments have the same potential as that for the (-) probe. Be sure to set the measuring instruments to the floating state. c. If you have mistakenly connected the REFO1 to the GND, turn off the regulator or the power immediately. • Before mounting and removing filters or leads for adjustment, be sure to turn off the regulator. • For stable circuit operation, keep the mechanism operating for about one minute or more after the regulator is turned on.
2) Test mode This mode is used to adjust the CD mechanism module. • To enter the test mode. While pressing the 4 and 6 keys at the same time, reset. • To exit from the test mode. Turn off the ACC and back up. Notes: a. During ejection, do not press any other keys than the EJECT key until the loaded disc is ejected. b. If you have pressed the (→) key or (←) key during focus search, turn off the power immediately to protect the actuator from damage caused by the lens stuck. c. For the TR jump modes except 100TR, the track jump operation will continue even if the key is released. d. For the CRG move and 100TR jump modes, the tracking loop will be closed at the same time when the key is released. e. When the power is turned off and on, the jump mode is reset to the single TR (91), the RF amp gain is set to 0dB, and the auto-adjustment values are reset to the default settings.
B
C
• In the test mode, any software protections will not work. Avoid applying any mechanical or electrical shock to the mechanism during adjustment. • The RFI and RFO signals with a wide frequency range are easy to oscillate. When observing the signals, insert a resistor of 1k ohms in series. • The load and eject operation is not guarantied with the mechanism upside down. If the mechanism is blocked due to mistaken eject operation, reset the product or turn off and on the ACC to restore it.
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
49
1
2
3
4
- Flow Chart [4]+[6]+Reset or [4]+[6]+BU+ACC
[KEY]
A
Contents
Test Mode In
Display
[CD]or[SOURCE] Source On TRK
SEC
MIN
[BAND]
[3]
Power On
Power On
[2]
(T.Offset is adjusted)
[4]
(T.Offset is not adjusted)
RF AMP *1 Gain switching
SPINDLE *9 Speed switching
TRK 99 MIN 99 SEC 99
TRK GGMIN GGSEC GG
TRK SP MIN SP SEC SP
[6] Focus Mode *2 switching TRK 0x MIN0x SEC 0x
[1]
[→]
Tracking Servo Close
CRG+
TRK 00 MIN00 SEC 00
B [BAND]
[3]
Power Off
Focus Close S curve check
TRK
MIN
SEC
TRK
91 MIN91 SEC 91
TRK
or
[BAND]
[1]
Power Off
T.Close and AGC
T.Close
Applicable servomechanism
Applicable servomechanism
TRK
MIN
SEC
TRK
?tr
MIN
00 MIN00 SEC00 99 MIN99 SEC99
SEC
TRK
?min ?sec
?tr
TRK
TRK
[6]
or
00 MIN00 SEC00 99 MIN99 SEC 99
TRK
[3]
MIN
SEC
TRK
or
00 MIN00 SEC00 99 MIN 99 SEC 99
Automatic adjustment switching *3 TRK
TRK
?? MIN?? SEC ??
[→]
[←] CRG-
T.Balance adjustment /
TRK8x MIN8x SEC8x
TRK8x MIN8x SEC8x
TRK ?? MIN?? SEC ??
RF AGC coefficient display TRK ?? MIN ?? SEC ??
[2] *8
CRG-
CRG+
RF AGC /
?min ?sec
[←] *8
or
TRK 9x MIN 9x SEC 9x
or
[2] T.BAL coefficient display
TRK 9x MIN 9x SEC 9x
C [1] F,T,RF AGC *7
[BAND] Power Off TRK
MIN
[3]
F.Bias display switching
SEC
TRK
[6]
F,T AGC / F.Bias RF AGC
?? MIN?? SEC ??
TRK
?tr
MIN
SEC
?min ?sec
[→] *4 CRG/TR Jump +
CRG/TR Jump *5 value switching TRK
?tr
MIN
SEC
TRK
?min ?sec
?tr
MIN
SEC
?min ?sec
[←] *4 CRG/TR Jump TRK
?tr
MIN
SEC
?min ?sec
[2] Tracking Open TRK
or
8x MIN8x SEC 8x 9xMIN 9xSEC 9x
TRK
*6
[BAND]
[2]
Power Off
Tracking Open
TRK
MIN
SEC
TRK8x MIN8x SEC8x
or
TRK 9x MIN 9x SEC 9x
D
*1)
→
TYP TRK
MIN
SEC
*2) Focus Close
→
→
-6dB TRK 06 MIN 06 SEC 06
-12dB
Operation
[Key]
TRK 12 MIN 12 SEC 12
Test Mode
TRK 00 MIN 00 SEC 00 (TRK 99 MIN 99 SEC 99)
S.Curve check setting
→
TRK 01 MIN 01 SEC 01
[BAND] Power On / Off
F EQ measurement setting TRK 02 MIN 02 SEC 02
[→]
CRG + / TR Jump + (Direction of the external surface)
[←]
CRG - / TR Jump (Direction of the internal surface)
[1]
U.CLS and AGC and Applicable servomechanism / AGC, AGC display setting
[2]
RF Gain switching / Offset adjustment display / T.Balance adjustment / T.Open
[3]
Close, S.Curve / Rough Servo and RF AGC / F, T, RF AGC
[4]
SPDL 1X / 2X switching As for the double speed (2x), audio output cannot be supported.
[5]
Error Rate measurement
[6]
F.Mode switching / Tracking Close / CRG • TR Jump switching
*3) F.Offset Display → T.Offset Display → Switch to the order of the original display
*4) 1TR / 32TR / 100TR
E *5) Single TR → 32TR → 100TR → CRG Move 9x(8x) : 91(81) 92(82) 93(83) 94(84) *6) Only at the time of CRG move, 100TR jump
*7) TRK/MIN/SEC → F.AGC → T.AGC → F Bias → RF AGC
1st - ON : ERR count Beginning (30Sec) 2nd - ON : BER display data [%]
*8) CRG motor voltage = 2[V]
*9) Applicability : A, B, C, D, E, F TYP(1X) → 2X →
F
TRK
MIN
SEC
TRK 22 MIN 22 SEC 22
Applicability : G TYP(2X) →
1X TRK 11 MIN 11 SEC 11
TRK
MIN
SEC
1X
→
TRK 11 MIN 11 SEC 11
2X TRK 22 MIN 22 SEC 22
As for the double speed (2x), audio output cannot be supported
50
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT A
• Note : The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below. • Purpose : To check that the grating is within an acceptable range when the PU unit is changed. • Symptoms of Mal-adjustment : If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or taking a long time for track searching. • Method : • Measuring Equipment • Measuring Points • Disc • Mode
B
• Oscilloscope, Two L.P.F. • E, F, REFO1 • TCD-782 • TEST MODE
CD CORE UNIT(S10.1) C L.P.F. E
Xch 100kΩ
F
Oscilloscope
390pF
VREF
Ych
100kΩ 390pF
VREF L.P.F.
F E
D
REFO1
• Checking Procedure 1. In test mode, load the disc and switch the 3V regulator on. 2. Using the → and ← buttons, move the PU unit to the innermost track. 3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the fourth press. 4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75° . Refer to the photographs supplied to determine the phase angle. 5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the mechanism should be judged to be at fault. • Note Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. • Hint Reloading the disc changes the clamp position and may decrease the "wobble".
E
F
DEH-P5700MP/XM/EW 5
6
7
8
51
1
2
3
4
Ech → Xch 20mV/div, AC Fch → Ych 20mV/div, AC
Grating waveform A
0°
30°
45°
60°
75°
90°
B
C
D
E
F
52
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
6.3 ERROR MODE - Error Messages Error is displayed with number for Error cause when CD is inoperative or stops with Error during operation. The purpose is to reduce nonsense calls from users as well as to assist all related analysis and repair for defects at service station.
A
(1) Basic Display Method 1) When CSMOD (CD mode area for system) is SERRORM, Error code will be written in DMIN (minutes area for display), DSEC (seconds area for display). The same data shall be written in DMIN and DSEC. DTNO is blank as usual. 2) Display Example of Head Unit The following is about LCD display ability. xx is Error number. 8 digits ERROR–xx
6 digits ERR–xx
4 digits
B
E–xx
OR Err–xx
(2) Error Code List No. Classification Contents 10 Electricity Carriage Home NG
Details • Cause CRG can’t move to the inner. CRG can’t move from the inner. → HOME SW failure, CRG movement failure. Focus can’t be caught. → Back of Disc / Severe dirt and vibration.
C
11
Electricity
Focus Search NG
12
Electricity
Spindle Lock NG Subcode NG
Not spindle, lock. Wrong subcode (can’t read). → Defective Spindle. Scratch and dirt on Disc. Intense vibration.
RF-amp NG
The appropriate gain of the RF amp cannot be obtained. → Defective spindle. → Scratched or dirty disc. Severe vibration. Abnormal CD signals.
17
Electricity
Setup NG
→ Blanc CD-R disc. Disc inserted upside down. AGC protection doesn’t work, out of Focus soon.
D
→ Scratch on Disc/Severe dirt and vibration. 22
Disc
Impossible to play
There is no playable MP3 or WMA file present in a disc.
23
Disc
File Format NG
Contents are stored in an incompatible file format. → The contents in a CD-ROM disc inserted are recorded in a file format other than ISO9660 Level-1 and 2.
30
Electricity
Search Time Out
Can’t reach the target address.
44
Disc
Impossible to play
There is no playable TRK No. present in a disc. → All TRK Nos. In a disc inserted are specified as a track which should be skipped, in the track skip information.
50
Mecha
Disc Load / Eject NG
Disc loading/ejection cannot be complete. → Foreign objects entered into the mechanism. Disc caught in between during loading/ejection.
A0
System
Power NG
→ No MP3 or WMA file exists in a CD-ROM disc inserted.
→ Defective CRG/tracking, or scratch on Disc. E
Power supply (VD) isn’t connected to the ground. → Defective SW transistor. Abnormal power (failed connector) Note : Error doesn’t display in mechanism only. (CD off causes mechanism off) If TOC can’t be read, error wouldn’t occur, but mechanism still continues its operation. The upper digits of error code is mainly classified by 3 kinds as follows: 1x: Setup related error, 3x: Search related error, Ax: Other errors.
DEH-P5700MP/XM/EW 5
6
7
8
F
53
1
2
3
4
7. GENERAL INFORMATION 7.1 DIAGNOSIS A
7.1.1 DISASSEMBLY - Removing the Case (not shown) 1. Remove the Case.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1)
1
Remove the four screws.
B
1
Disconnect the connector and then remove the CD Mechanism Module.
1 - Removing the Grille Assy (Fig.1)
2
Remove the two screws and then remove the Grille Assy.
1
2
2
C
1
Fig.1
Grille Assy - Removing the Tuner Amp Unit (Fig.2)
1
Remove the screw.
2
2
D
2
Remove the three screws.
3
Straighten the tabs at three locations indicated.
4
Remove the screw and then remove the Tuner Amp Unit.
2
4 1
E
3
3
3
Tuner Amp Unit
Fig.2
F
54
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
- How to hold the Mechanism Unit 1. Hold the top and bottom frame. 2. Do not squeeze top frame's front portion too tight, because it is fragile.
A
B
Do not squeeze.
- Removing the Upper and Lower Frames 1. With a disc clamped, remove the four springs (A), the two springs (B), the two springs (C), and the four screws. 2. To remove the upper frame, open it on the fulcrum A. 3. While lifting the carriage mechanism, remove the three dampers. 4. With the frames removed, insert the connectors coming from the main unit and eject the disc. Caution: Before installing the carriage mechanism in the frames, be sure to apply some alcohol to the dampers and set the mechanism to the clamp mode.
Upper Frame
A
A
C C
A
A
Carriage Mechanism B Damper Lower Frame
C
A
D
Damper B
Damper
E
F
DEH-P5700MP/XM/EW 5
6
7
8
55
1
2
3
4
- Removing the Pickup Unit 1. Apply shorting solder to the Pickup flexible cable. Disconnect the cable. 2. Set the mechanism to the clamp mode. 3. Remove the lead wires from the inner holder. 4. Remove the washer, styling holder, change arm, and pickup lock arm. 5. While releasing from the hook of the inner holder, lift the end of the feed screw. Caution: In assembling, move the planet gear to the load/eject position before setting the feed screw in the inner holder.
A
Shorting Solder
B
Washer
C
Pickup Lock Arm Change Arm
Styling Holder
Feed Screw
D
E
Inner Holder Planet Gear
F
56
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
7.1.2 CONNECTOR FUNCTION DESCRIPTION
A
R
F
1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16
10A
8 9 10 11 5 6
7
1 2 3 4
B
POWER SUPPLY SPEAKER OUTPUT
FRONT OUTPUT
IP-BUS
WIRED REMOTE CONTROL
REAR OUTPUT ANTENNA JACK
POWER SUPPLY, SPEAKER OUTPUT Pin No. Pin No. 9 1 FR+ 10 2 RR+ 11 3 FR12 4 RR13 5 FL+ 14 6 RL+ 15 7 FL16 8 RL-
NC NC B.REM NC NC ACC GND B.UP
C
D
IP-BUS Pin No. 1 2 3 4 5 6
BUS+ GND GND NC BUSGND
Pin No. 7 8 9 10 11
BUS L+ INPUT ASENB BUS R+ INPUT BUS R- INPUT BUS L- INPUT
E
F
DEH-P5700MP/XM/EW 5
6
7
8
57
1
2
3
4
7.2 PARTS 7.2.1 IC - Pin Functions (PE5464A)
A
Pin No. 1 2-4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29-31 32 33 34 35 36 37 38,39 40 41 42 43 44 45 46 47 48 49-55 56,57 58 59-61 62 63 64 65 66 67 68 69,70 71 72
B
C
D
E
Pin Name swvdd NC TESTIN LCDPW TELIN ejectin FLPILM dalmon reset XT2 XT1 VSS X2 X1 REGOFF REGC VDD ILMPW SYSPW ADPW NC IPPW NC ROMDATA ROMCLK ROMCS NC tunpce@ VST VCK VDT NC mute NC VSS VDD RDS57K drst rdslk RDT DORAON NC CSENSOUT NC ROT1,0 STRKEY2 NC PCL BRXEN BSRQ TSCK/BSCK TSI/BSI BSO BRST NC ASENSBO EMUTE
I/O O
Function and Operation Grille : Chip enable output Not used Test program mode input Not used Telephone mute input Eject sense input Flap illumination output For consumption low-current output Reset input Not used Clock connection pin GND Crystal oscillator connection pin Crystal oscillator connection pin Regulator operation specification signal input Capacitor for regulator connect pin Power supply Illumination power supply control output System power control output A/D converter power supply control output Not used Power supply control output for IP BUS interface IC Not used ROM correction data input/output Not used Not used Not used PLL chip enable output2 E.VOL : Strobe output E.VOL : Clock output E.VOL : Data output Not used System mute output Not used GND Power supply RDS : 57kHz pulse count input RDS : Decoder reset output RDS : LOCK input L : RDS signal ON RDS : Data input Not used Not used CSENS state output Not used Rotary encoder pulse input 1,0 Steering remote controller input Not used Clock adjustment output P-BUS : Reception enable input/output P-BUS : Service request input P-BUS : Serial clock output P-BUS : Serial data input P-BUS : Serial data output P-BUS : Reset output Not used IP-BUS : Slave power supply control output Not used
I O I I O O I I
I I
O O O O I/O O O O O O O O
I O I I O O I I O I/O I O I O O O
F
58
DEH-P5700MP/XM/EW 1
2
3
4
5
Pin No. 73 74 75 76 77 78-81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
6
Pin Name TEST SL STRKEY1 NC CSENS NC AVDD AVREF AVSS RX TX NMI LDET RCK dsens NC asens bsens TUNPDI KYDT DPDT TUNPCK TUNPDO TUNPCE BEEP
I/O I I I
7
8
Function and Operation GND TUNER : Signal level input Steering remote controller input Not used Flap close sense input Not used A/D converter power supply terminal A/D converter reference voltage terminal GND IP-BUS : Data input IP-BUS : Data output GND RDS : PLL lock detection output RDS : RDS clock input Grille detach sense input Not used ACC power sense input Back up power sense input PLL IC data input Grille data input Grille data output PLL clock output PLL data output PLL chip enable output Beep tone output
I
O I O I O I I I I I I O O O O O
A
B
C
81
100
* PE5464A IC's marked by * are MOS type. Be careful in handling them because they are very liable to be damaged by electrostatic induction.
80
1
30
5
4
50
31
51
N.C.
BD4834G
N.C.
D
E
1
2
3
VOUT
VDD
GND
Vref
F
DEH-P5700MP/XM/EW 5
6
7
8
59
1
2
3
4
3
4
- Pin Functions(PD6340A) Pin No. 1-5 6-9 10 11-14 15,16 17 18 19 20 21 22 23 24 25,26 27 28 29-32 33-55 56 57-64
A
B
Pin Name SEG4-0 COM3-0 VLCD KST3-0 KDT0,1 REW DPDT NC KYDT MODA X0 X1 VSS KDT2,3 NC KST4 NC SEG35-13 VDD SEG12-5
I/O O O O I I I O
I O O O
Function and Operation LCD segment output LCD common output LCD drive power supply Key strobe output Key data input (analogue input) Remote control reception input Display data input Not used Key data output GND Crystal oscillator connection pin Crystal oscillator connection pin GND Key data input Not used Key strobe output Not used LCD segment output Power supply LCD segment output
* PD6340A 16
1
C
64
17
49
32 33
48
D
NJM2388F84
E
F
60
DEH-P5700MP/XM/EW 1
2
5
6
7
8
- Pin Functions(UPD63763GJ) Pin No. 1 2 3 4-8 9-16 17 18 19 20 21 22 23, 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39-41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73-88 89-99
Pin Name D.VDD D1.GND reset AB12-8 AD7-0 cs ASTB read write wait INTQ IFMODE0, 1 D1.VDD DA.VDD ROUT DA.GND REGC DA.GND LOUT DA.VDD X.VDD XTAL xtal X.GND VDDREG15 PWMSW0 TEST3-1 PWMSW1 TESTEN D1.GND DIN DOUT SCKIN SCKO LRCKIN LRCK xtalen D1.VDD RFCK/HOLD WFCK/MIRR PLCK/RFOK LOCK/RFOK C1D1/C8M C1D2/C16M C2D1/RMUTE C2D2/LMUTE C2D3/SHOCK D1.GND C33M (rcs) RA11 (CKE) ras cas)(LDQM) cas!(UDQM) we oe(cas) D.GND RDB0-15 RA0-10
I/O
I I I/O I I I I O O I
O
O
I O
I I I I I O I O I O I O O O O O O O O O O O O O O O O O O I/O O
Function and Operation Power supply for digital circuits GND for 1.6V digital circuits Input of reset Address bus 12-8 from the microcomputer Address/data bus 7-0 to the microcomputer Chip selection Address strobe Control signals(read) Control signals(write) Control signals(wait) Interruption signals to the external microcomputer Switching the microcomputer I/F 0, 1 Power supply for 1.6V digital circuits Power supply for DAC Output of audio for the right channel GND for DAC Connected to the capacitor for band gap GND for DAC Output of audio for the left channel Power supply for DAC Power supply for the crystal oscillator Connected to the crystal oscillator(16.9344MHz) Connected to the crystal oscillator(16.9344MHz) Ground for the crystal oscillator Control of 1.6V regulator Setup 0 for PWM output(SD, MD) Connected to GND Setup 1 for PWM output(FD, TD) Connected to GND GND for 1.6V digital circuits Input of audio data Output of audio data Clock input for audio data Clock output for audio data Input of LRCK for audio data Output LRCK for audio data Permission to oscillate 16.9344MHz Power supply for 1.6V digital circuits Output of RFCK/HOLD signal Output of WFCK/MIRR signal Output of PLCK/Output of RFOK Output of LRCK/Output of RFOK Information on error correction/C8M : 8MHz Information on error correction/C16M : 16MHz Information on error correction/Mute for Rch Information on error correction/Mute for Lch Information on error correction/Detection of vibration GND for 1.6V digital circuits Output of 33.8688MHz(CLK for SDRAM) DRAM cs Output of DRAM address 11 Output of DRAM CKE Output of DRAM ras Output of DRAM lower cas(LDQM) Output of DRAM upper cas(UDQM) Output of DRAM we Output of DRAM oe(cas) Ground for digital circuits Input/output of DRAM data0-15 Output of DRAM address0-10
A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
61
1
2
Pin No. 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120, 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144
A
B
C
D
Pin Name D.VDD FD+ FDTD+ TDSD+ SDMD+ MDREFOUTSV AD.VDD EFM ASY ATEST RFI AD.GND AGCO C3T AGCI RFO EQ2, 1 RF2RFA.GND A C B D F E VREFIN A.VDD REFOUT REFC FEFEO ADIN TETEO TE2 TEC LD PD D.GND
I/O
3
4
Function and Operation Power supply for digital circuits Output of focus drive PWM + Output of focus drive PWM Output of tracking drive PWM + Output of tracking drive PWM Output of thread drive PWM + Output of thread drive PWM Output of spindle drive PWM + Output of spindle drive PWM REFOUT for servo Power supply for ADC Output of EFM signals Input of asymmetry Analog tests Input of RF Ground for the analog system Output of RF Connection to the capacitor for detecting 3T Input of AGC Output of RF(AGC) Equalizer 2, 1 Reversal input of RF2 Reversal input of RF Ground for the analog system Input of A Input of C Input of B Input of D Input of F Input of E Input of reference voltage Power supply for the analog system Output of reference voltage Connected to the capacitor for output of REFOUT Reversal input of FE Output of FE Input of FE, TE A/D converter Reversal input of TE Output of TE TE2 TEC Output of LD Input of PD Ground for digital circuits
O O O O O O O O O O I O I O O I O I I I I I I I I I I O I I O I I O O I O I
E
72
144
37 1
36
109
F
62
73
108
* UPD63763GJ
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
- Pin Functions(PE5454A) Pin No. 1 2 3 4 5 6, 7 8 9 10 11 12 13 14 15
Pin Name AVREF AVSS RFOK NC EVDD NC IC/FLMD0 VDD REGC VSS X1 X2 reset XT1
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35, 36 37 38 39-42 43 44 45 46 47 48 49 50 51 52 53 54 55 56-58 59 60 61 62 63 64 65 66
XT2 NC NC xint NC brst BSI BSO bsck FTXD FRXD BRXEN bsrq NC DSCSNS 8EJ(S905) 12EJ(S904) EVSS EVDD SRAMLEVEL0, 1 EMPH emph NC adena LRCKOK SRAMLEVEL2 CD3VON CONT xrst VDCONT ROMDATA ROMCS ROMCK LOEJ CLCONT CDMUTE NC xcs NC xwait CLKOUT LOCK NC xwrite NC
I/O
Format
O
C
I I I
C I I O I/O O I I/O I/O
C /C C /C /C
I I I
O O O
C C C
O O O O O O O I/O O O O O O
C C C C C C C /C C C C C C
O
C
I O I
C
O
Function and Operation A power supply Positive power supply(5V) A power supply GND Output of state of RFOK Not used E power supply Positive power supply Not used IC : VSS direct connection/FLMOD0 : Pull-down Positive power supply(5V) Connected to the capacity stabilizing output of the regulator GND Oscillator connection for mainclock Oscillator connection for mainclock System reset input Connected to the oscillator for subclock (connected to VSS via the resistor) Connected to the oscillator for subclock(Open) Connected to EVDD or EVSS via the resistor Not used CD LSI interruption signal input Connected to VSS via the resistor P-Bus reset input P-Bus serial data input P-Bus serial data output P-Bus serial clock input/output For flash rewriting(transmitted signal) For flash rewriting(received signal) It is possible to receive P-Bus P-Bus service request demand Not used Disc state sense input Input of detection of 8 cm disc ejection Input of detection of 12 cm disc ejection E power supply GND E power supply Positive power supply SRAM level meter output Emphasis information output Emphasis information output Not used A/D reference voltage supply control output (DOUT mute output) SRAM level meter output CD +3.3V power supply control output Servo driver power supply control output CD LSI reset control output VD power supply control output E2PROM data input/output E2PROM chip selection output E2PROM clock output The direction change output of LOAD/EJECT Driver input change output CD mute control output Not used CD LSI chip selection output Not used CD LSI write control signal output Internal system clock output(Open) Spindle lock input Not used CD LSI write control signal output Not used
DEH-P5700MP/XM/EW 5
6
7
8
A
B
C
D
E
F
63
1
Pin No. 67 68 69 70 71-83 84-86 87 88 89-93 94 95 96 97 98 99 100
A
B
2
Pin Name xread XASTB BVSS BVDD AD0-12 NC FMODE FLRQ NC csens TYPE_A/D testin HOME TEMP VDSENS NC
3
I/O O O
Format
I/O
/C
I O
C
I I I I
4
Function and Operation CD LSI read control signal output CD LSI address strobe output B power supply GND B power supply Positive power supply Address/data Bus 0-12 Not used For flash rewriting Connected to VSS via the resistor For flash rewriting Not used Flap closing sense input CD-DA analog/digital output change setup Chip check test program starting input Home SW sense input Temperature information sense input VD power supply short sense input Not used
* PE5454A 75
51
Format C
76
50
100
26
Meaning CMOS
1
25
C
D
NJM2885DL1-33
Thermal Protection
-+
E Bandgap Reference
1
2
3
IN
GND
OUT
F
64
DEH-P5700MP/XM/EW 1
2
3
4
5
6
7
8
- FM/AM Tuner Unit
OSC
AM ANT 1
RDS_HSLK
RDS_DATA
18 19 20 21 RDS_LOCK
DO
14
RDS_CK
11 LDET
DI 5V
CK
SL
IC 3 EEPROM 5.0V
10 9 8 CE1
5
ROM_VDD
CE2
WC
13
A
IC 5 3.3V ←
7 6
LPF
FMRF
ATT Rch
3
IC 1 3.3V
FM ANT ATT FMRF ANT adj
24
IC 2 2.5V Lch
MIXER, IF AMP RF adj
T51
23
DET, FM MPX, RDS DECODER
B
CF52
No. Symbol 1 AMANT
2 3 4 5 6 7
RFGND FMANT VCC SL CE2 WC
AUDIOGND
NC
15
22
16
I/O Explain I AM antenna input
I O I I
CE1 CK DI LDET OSCGND ROM_VDD
I I I O
chip enable-1 clock data in lock detector osc ground power supply
14 15 16 17 18 19 20
DO DGND NC VDD_3.3 RDS_CK RDS_DATA RDS_LOCK
O
data out digital ground non connection power supply RDS clock RDS data RDS lock
21 RDS_HSLK
O
O O O
22 AUDIOGND 23 L ch O 24 R ch O
IC 4 3.3V 2.5V 2.5V
17
AM antenna input high impedance AMANT pin is connected with an all antenna by way of 4.7µH. (LAU type inductor) A series circuit including an inductor and a resistor is connected with RF ground for the countermeasure against the hum of power transmission line. Ground of antenna block Input of FM antenna 75Ω Surge absorber(DSP-201M-S00B) is necessary. The power supply for analog block. D.C 8.4V ± 0.3V Output of FM/AM signals level Chip enable for EEPROM ”Low” active You can write EEPROM, when EEPROM write control is “Low”. Ordinary non connection Chip enable for AF•RF ”High” active Clock Data input “Low” active Ground of oscillator block Power supply for EEPROM pin 13 is connected with a power supply of micro computer. Data output Ground of digital block Not used The power supply for digital block. 3.3V ± 0.2V Output of RDS clock(2.5V) Output of RDS data(2.5V) Output unit “High” active(2.5V) (RDS_LOCK turns over by the external transistor. “Low” active) Output unit “High” active(2.5V)(RDS_HSLK turns over by the external transistor. “Low” active) Ground of audio block FM stereo “L-ch” signal output or AM audio output FM stereo “R-ch” signal output or AM audio output
RF ground FM antenna input power supply signal level chip enable-2 write control
8 9 10 11 12 13
4
VDD_3.3
DGND
12
VCC
OSCGND
2
3.3V
←
RFGND
CF51
RDS high speed lock audio ground L channel output R channel output
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
65
66
1
2
3
4
3
4
DEH-P5700MP/XM/EW
F
COMMON
SEGMENT
SEG39 SEG38 SEG37 SEG36
COM 3
E
COM3 COM2
COM 2
COM1
COM 1
COM0
COM 0
SEG35 SEG34 SEG33 SEG32 SEG31 SEG30
D
SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20
C
SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10
B
SEG9 SEG8 SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 SEG0
A
- LCD(CAW1851)
7.2.2 DISPLAY 1
2
5
6
7
8
7.3 OPERATIONAL FLOW CHART Power ON
A
VDD=5V Pin 19, 41
bsens Pin 93 B
bsens=L asens Pin 92 asens=L dsens Pin 90 dsens=L
C
ASENSBO←H Pin 71
CSENS Pin 77 2V < CSENS < 3V Starts communication with Grille microcomputer. 300ms swvdd←L Pin 1
Source keys operative
- CSENS < = 2V, 3V < = CSENS Last source returns. CD loading functions are available. Keys except for EJECT key are not available. D
300ms In case of the above signal, the communication with Grille microcomputer may fail. If the time interval is not 300msec, the oscillator may be defective. E
Source ON
SYSPW←H Pin 21
Completes power-on operation. (After that, proceed to each source operation) F
DEH-P5700MP/XM/EW 5
6
7
8
67
1
2
3
4
3
4
7.4 CLEANING A
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned CD pickup lenses
Cleaning tools Cleaning liquid : GEM1004 Cleaning paper : GED-008
B
C
D
E
F
68
DEH-P5700MP/XM/EW 1
2
5
6
7
8
8. OPERATIONS A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
69
1
2
1
2
3
4
3
4
A
B
C
D
E
F
70
DEH-P5700MP/XM/EW
5
6
7
8
A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
71
1
2
1
2
3
4
3
4
A
B
C
D
E
F
72
DEH-P5700MP/XM/EW
5
6
7
8
A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
73
1
2
1
2
3
4
3
4
A
B
C
D
E
F
74
DEH-P5700MP/XM/EW
5
6
7
8
Fixing the front panel A
If you do not operate the removing and attaching the front panel function, use the supplied fixing screws and holders to fix the front panel to this unit.
1. Attach the holders to both sides of the front panel. Holder CND1249
Holder CND1250
B
2. Replace the front panel to the unit.
C
3. Flip the holders into upright positions.
D
4. Fix the front panel to the unit using fixing screws.
Fixing Screw BPZ20P060FZK
E
F
DEH-P5700MP/XM/EW 5
6
7
8
75
E
76
1 4*
5*
2 Red (4*) To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
Red (5*) Accessory (or back-up)
Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
Speaker leads White : Front left + White/black : Front left ≠ Gray : Front right + Gray/black : Front right ≠ Green : Rear left + Green/black : Rear left ≠ Violet : Rear right + Violet/black : Rear right ≠
Rear Speaker
Left
Front Speaker
The pin position of the ISO connector will differ depends on the type of vehicle. Connect 6* and 7* when Pin 5 is an antenna control type. In another type of vehicle, never connect 6* and 7*.
Blue/white (6*)
Blue/white (7*) To Auto-antenna relay control terminal (max. 300 mA 12 V DC).
Blue/white To system control terminal of the power amp (max. 300 mA 12 V DC).
Jack for the Wired Remote Control Please see the Instruction Manual for the Wired Remote Control (sold separately).
IP-BUS input (Blue)
Perform these connections when using the optional amplifier.
Rear Speaker
Right
Front Speaker
System remote control
Power amp (sold separately)
Power amp (sold separately)
2
ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors.
Black (ground) To vehicle (metal) body.
Yellow (2*) To terminal always supplied with power regardless of ignition switch position.
Yellow (3*) Back-up (or accessory)
Connect leads of the same color to each other.
Fuse Front output (FRONT OUTPUT)
Rear output (REAR OUTPUT) Antenna jack
C
Cap (1*) When not using this terminal, do not remove the cap.
2*
This product
IP-BUS cable
Connecting cords with RCA pin plugs (sold separately)
B
3*
D Multi-CD player (sold separately)
A
1*
Note: Depending on the kind of vehicle, the function of 3* and 5* may be different. In this case, be sure to connect 2* to 5* and 4* to 3*.
1 3
3
4
-
F
DEH-P5700MP/XM/EW
4
5
6
7
8
A
B
C
D
E
F
DEH-P5700MP/XM/EW 5
6
7
8
77
1
2
3
4
- Jigs List Name Test Disc L.P.F.
A
Jig No. TCD-782
Remarks Checking g the g grating g Checking g the g grating g ((Two pieces))
B
C
D
E
F
78
DEH-P5700MP/XM/EW 1
2
3
4
