Transcript
156
10. SAFETY
EUROTUBO®
DELTALAB
10. SAFETY
EUROTUBO®
DELTALAB
157
10. SAFETY
PP
158
121º C
1
2
3
4
5
Safety containers Containers manufactured in virgin raw materials enabling incineration; four and six liters containers are made in autoclavable polypropylene, the rest in polyethylene. They are compound by a body bearing the hazard warning label, and two lids: - The first offers an entire opening, taking advantage of the total diameter of the mouth of the container; very useful to throw away bigger volume waste. May be closed hermetically and definitively. - The secondary one presents a partial opening, which may be closed temporarily or definitively. It embodies two devices in order to easy the extraction/disconnection of dental and analytical needles, and a 70 x 42 mm rectangular orifice. All containers, excepting code 241500, embody a handle. In accordance with ISO 6706, BS 5404 standards and major European standards. mod.
code
capacity l
material (body and lid)
Ø mouth mm
Ø base mm
height mm
case quantity
case weight
case volume
pallet quantity
1
241500
1.5
PE
148
122
134
60
10.26
0.120
960
2
242000
2.0
PE
148
122
162
60
10.26
0.120
960
3
244000
4.0
PP
195
175
172
45
12.50
0.170
300
4
246000
6.0
PP
220
193
201
35
10.44
0.150
240
5
240007
7.0
PE
210
178
240
30
10.60
0.140
240
Customised containers are available upon request for a minimum order of 4,000 units.
Needle collection container Made in high density polyethylene. Instructions for use (in English and Spanish) are printed on the containers. Capacity: 1 liter. It features two caps. The first one has a mouth which embodies three different devices to remove needles. The other one is designed to close the container temporarily or definitively. Once fully closed, containers are taken for incineration. Can be incinerated without release of toxic fumes, like all our containers. code
colour
case quantity
case weight
case quantity
241400
yellow cylindrical container
76
7.9
0.15
red cylindrical container
76
7.9
0.15
241400R
EUROTUBO®
DELTALAB
10. SAFETY
1
2
3
Safety containers These containers are manufactured in virgin raw materials enabling incineration. They are compound by a body bearing the hazard warning label, a handle, and two lids, allowing two using options: - Total opening, taking advantage of the total diameter of the mouth of the container; very useful to throw away bigger volume waste. - Partial opening, 120 mm diameter, usable for syringes, contact plates, and midsize waste. In accordance with ISO 6706, BS 5404 standards and major European standards.
mod.
code
capacity l
material body lid
ø mouth mm
ø base mm
height mm
packs
pack weight
pack volume
pallet quantity
1
240011
11
PE
PP
260
226
255
10
5.46
0.058
500
2
240021
20
3
240028
25
PE
PP
323
277
328
10
10.23
0.094
260
PE
PE
323
283
387
10
11.10
0.145
200
Customised containers are available upon request for a minimum order of 4,000 units. Other colours, for example, red, available on request.
The secondary lid allows to put Petri dishes (up to 120 mm diameter).
EUROTUBO®
DELTALAB
159
160
10. SAFETY
* 121º C * 9 is not autoclavable
8 9
7 3 2
4 1
5
6
Safety containers
A mod. 3
A+C mod. 5
D mod. 6, 7, 8
B mod. 2 C mod. 4 A mod. 1
E mod. 9
EUROTUBO®
DELTALAB
Manufactured in polypropylene, they are also shockproof, perforation and solvents resistant, and can be incinerated. Two ways of locking: provisional; and permanent. Excepting model 232803, which has the special Hot Melt glue at the lid, all the other containers are autoclavable. Portable models 232805, 260000 and 232806 are designed to be easy opened and closed with just one hand. ➀ - 232805, 0.25 l capacity. This pocket container is able to hold 100 needles. Also ideal for lancets and scalpel blades. Features a device type A. ➁ - 260000, 0.45 l capacity. Designed for those people who need regular injections and have to carry a needle container. With a device type B and a handle. Black colour. ➂ - 232807, 0.5 l capacity. Ideal as a benchtop model or to take on in a basket. Can be used with the lid totally opened (80 x 80 mm), or partially closed (remaining a 80 x 20 mm aperture). In this position the lid embodies a removing device type A. Features an optional base (24 included) with an adhesive tape, to ensure stability. ➃ - 232806, 0.6 l capacity. Usable for insulin needles, it is also right for complete syringes. Features a device type C and a handle on one side. ➄ - 232809, 1 l capacity. Suitable in places where waste quantity to be disposed of is small. With a handle and devices A and C. ➅ - 232808, 2 l capacity. Features devices type D and an optional base (24 pieces included) to ensure stability (with an adhesive tape). ➆ - 232801, 4 l capacity. The most used container for discarding residues in general. Embodies devices type D and a handle. ➇ - 232802, 7 l capacity. Its height makes it ideal for contaminated pipettes. With devices type D. ➈ - 232803, 11 l capacity. With a handle and a large opening (device type E), ideal for disposal of all kinds of residues, Petri dishes, etc… All models, excepting 232808, 260000, and 232806, embody a socket to place needle caps in vertical position. Manufactured pursuant to ISO 9001, all of them are in accordance with ADR (UN). Excepting portable models (232805, 260000, and 232806) the others are also in accordance with BS 7320 and AFNOR NF X 30 500 standards. These models are constantly updated; design can be slightly modified.
mod.
code
capac. l
container dimensions mm
opening useful container. case devices capacity l weigth g quantity
case weight
case volume
1
232805
0,25
95 x 40 x 115
A
0.20
64
100
6.50
0.042
2
260000
0.45
167 x 105 x 50
B
0.35
88
100
10.00
0.078
3
232807
0.50
90 x 90 x 125
A
0.40
108
100
9.50
0.051
4
232806
0.60
110 x 55 x 220
C
0.47
112
100
12.30
0.112
5
232809
1.00
107 x 90 x 190
A+C
0.81
125
100
13.72
0.095
6
232808
2.00
195 x 120 x 170
D
1.60
216
50
12.50
0.080
7
232801
4.00
175 x 175 x 248
D
3.00
310
50
13.70
0.157
8
232802
7.00
175 x 175 x 382
D
5.60
434
50
22.40
0.209
9
232803
11.00
290 x 190 x 300
E
8.30
588
20
13.60
0.120
DEVICES: A. Removal of luerlock, luerslip and pen needles. B. Removal of needles with non return system. C. Oval aperture (40 x 30 mm, code 232806; 55 x 35 mm, code 232809), for syringes and lancets. D. Four kinds of aperture: an oval one with a pumphandle non return lid (105 x 40 mm); another one designed to remove scalpel blades; one to remove luerlock and blood collection systems; and the last one to remove butterfly and luerslip needles. E. Horizontal rectangular aperture (200 x 50 mm) with white non return lid.
10. SAFETY
3
2
1
4
Cardboard waste containers Cardboard containers with lid, designed for storage and disposal of group II solid and semi-solid waste. With an integrated low density polyethylene bag (stuck in their interior). Economical and environment friendly, non polluting. They can be incinerated without release of toxic fumes. The lid features two seals. One temporary that will avoid unpleasant smells and eliminate the risk of contamination while using the container. The second one is a definitive, positive seal: closing the bag with a belt already included, sealing the lids, and reinforcing them with an adhesive tape. These containers embody lateral handles. Model 3, code 250050, 50 l capacity, is made of cardboard 2.7 mm minimal thick. PEBD 70 µ bag, adhered to the base and the walls. Its height allows users not to need to lean forward as they throw away waste. Easy to assemble thanks to its auto-mountable bottom. A maximum filling line is printed on its body. Model 4, code 270045, 45 l capacity, is manufactured in reinforced cardboard, double thickness (4 mm minimum). PEBD bag 54 µ adhered to the base. Safe closure with the help of raised edges. Both are printed with the biohazard anagram and text; assembling and closing instructions and drawings; identification formulary, and standards. In accordance with UN ADR (road transport), and manufactured pursuant to ISO 9001:2000 standards. Containers are supplied folded up for space-saving. Those containers are not suitable for needle disposal. For this purpose see the special containers on pages 158, 159, 160 and 161.
model
code
capacity l
container dimensions mm
maximun load kg
weight ut. g
pallet dimensions
pallet quantity
pallet weight
3
250050
50
263 x 263 x 756
12.5
642
100 x 120 x 180
40 x 10
240
4
270045
45
290 x 375 x 565
18.0
930
120 x 100 x 220
250
260
Minimum ordering quantity: 10 units (it is recommended to order the whole pallet to avoid to dirty the boxes).
Rectangular waste containers Made of yellow, perforation resistant, virgin polypropylene. Suitable for solid or semi-solid waste, II and III Groups. Lids feature a central handle for a better handling in the daily use and also while carrying containers. Secure closure thanks to their fourteen closing points. Lateral handles for further help carrying. Can be incinerated with no release of toxic fumes. Stackable when empty, or full and closed. Minimum wall thickness: 2.5 mm In accordance with UN ADR and AFNOR NF X30 500. Manufactured following ISO 9002 and ISO 14001.
model
code
capacity l
container dimensions mm
maximun load (ADR) kg
weight ut. g
pallet dimensions
pallet quantity
pallet weight
1
240035
35
400 x 300 x 360
14
1,400
100 x 120 x 240
180
235
2
240065
60
400 x 300 x 575
25
2,000
100 x 120 x 240
160
319
EUROTUBO®
DELTALAB
161
162
10. SAFETY
Concentrated deodorant Nilodor Scientifically elaborated concentrated deodorant. Ideal for hospitals (in microbiology, autopsy and oncology applications), veterinary clinics, private homes and farms to avoid unpleasant smells from animals. This product does not cover odours. On the contrary it quickly NEUTRALISES AND ELIMINATES them. Non toxic. Does not contaminate. Does not leave stains. 2 versions available: spray or concentrated liquid (only ONE DROP required for desodorising). Spray comes in a plastic bottle; liquid is supplied in a glass bottle. Expiration date: 5 years.
code
description
case quantity
case weight
case quantity
910000
liquid, 7.5 ml bottle (200 drops)
12
0.046
0.00018
911000
spray, 100 ml bottle
15
0.133
0.001
c (MDD)
Urine collection bottle
Made of high density polyethylene. Colour: natural. Collection bottle for male urine, including a 110 mm handle. The handle is closed at its two ends so that urine cannot flow through it. The bottle has moulded-in graduations in 100 ml increments up to 900 ml. Total capacity: 1.5 l. Rounded rim on the neck of the bottle. Inner diameter of the neck is 50 mm, outer diameter is 62 mm. Supplied individually wrapped. Can be sterilised by ethylene oxide. code
capacity
case quantity
case weight
case volume
cases per pallet
19591
1,500 ml
60
6.20
0.14
24
c (MDD)
Urine collection bottle with lid
With the same characteristics than the previous model this one features a plug in lid. Individually wrapped. code
capacity
case quantity
case weight
case volume
cases per pallet
19591/T
1,500 ml
60
6.80
0.14
24
121º C
c (MDD)
Bed pan
Made of white polypropylene. Especially designed for disabled people, for the collection of urine and faeces. Recommended for hospital use as it is anatomically designed. Features rounded edges for more comfort. L-shaped handle for a better handling. Allows a secure one-handed grip and avoids accidental spillage. Total capacity: 2.5 l. Autoclavable. Can be washed in automatic machines. Supplied individually wrapped.
EUROTUBO®
DELTALAB
code
dimensions mm
case quantity
case weight
case volume
cases per pallet
19586
440 x 270 x 95
20
5.00
0.140
16
10. SAFETY Temperature indicator discs With the same size than a coin and lined by aluminium-polyester. This disc turns its WHITE colour to BLACK when the autoclave temperature reaches 121 ºC (permanent colour change). Resists up to 2 kg pressure. Ideal to assure that 121ºC temperature has been reached.
code
bag quantity
bag weight
bag volume
191230
100
0.20
0.0001
121º C
Sterilisation indicator tapes Self-adhesive sterilisation indicator tapes made of semicreped paper. Suitable for sticking on different surfaces such as plastic, metal, fabrics, paper, cardboard... Thickness range from 0.15 mm to 0.17 mm depending on the model. Tape will remain securely affixed for 18 months. 191050: indicator for sterilisation by ethylene oxide gas. The printed letters GAS change colour from red to green by effect of time, temperature, humidity and EO concentration as per the following specification: • exposition to 500 mg/l EO and 60% RH for minimum 30 min at 30ºC, or • exposition to 12% EO and 60% RH for minimum 48 min at 54ºC. 191051: indicator for sterilisation with poupinel method (dry heat). The green strips turn to brown by the effect of time and temperature as per the following specification: • exposition 30 min at 160ºC in dry air.
1
2
3
191052: indicator for sterilisation with steam. The white strips turn to dark brown by the effect of time, temperature and saturated steam as per the following specification: • exposition at 121ºC for 15 min, or • exposition at 134ºC for 3 min. It is recommended to store the product in its original packaging and in a cool dry place. Do not expose to extremes of temperature and direct sunlight. mod.
code
type of sterilisation
lenght m
width case case case mm quantity weight volume
1
191050
ethylene oxyde gas
50
19
8
1.06
0.0048
2
191051
dry heat (pou pinel)
50
19
1
1.06
0.0048
3
191052
autoclave
50
19
8
1.06
0.0048
1 2
121º C
Sterilisation indicator tapes For steam autoclave. Model 1: The tape has printed on it CONTAMINATED. After sterilisation to +121 ºC the word STERILIZED appears. Model 2: The tape has printed on it -Batch, –Con. (Control) and –Date. After sterilisation to +121 ºC the word STERILIZED appears.
mod.
code
description
case quantity
case weight
case volume
1
191222
roll of 19 mm x 13 m
6
0.20
0.0003
2
191223
roll of 19 mm x 13 m
6
0.20
0.0003
EUROTUBO®
DELTALAB
163
164
10. SAFETY Coloured adhesive tapes for sample identification Ideal for use in freezers, autoclaves, etc... Peel off without leaving a sticky residue. Withstand temperatures from –50ºC to +130ºC. High resistance to oils, acids, water etc... Suitable for glass, plastic, paper, metal and rubber surfaces. Can be marked with pencil, ball-point pen ... Available in a variety of colours for better sample identification. Tape roll inside diameter: 13 m rolls: 26 mm, 55 m rolls: 76 mm. All tape models are 19 mm wide. Also available is a 12 roll tape dispenser that accepts 55 m rolls. Small tape rolls fit the majority of roll tape dispensers available on the market.
3
code
colour
tape lenght m
case quantity
case weight
case volume
191221/1
white
13
16
2.50
0.010
191221/2
red
13
16
2.50
0.010
191221/3
yellow
13
16
2.50
0.010
191221/4
green
13
16
2.50
0.010
191221/5
orange
13
16
2.50
0.010
191221/6
blue
13
16
2.50
0.010
191221.1
white
55
12
1.25
0.001
191221.2
red
55
12
1.25
0.001
191221.3
yellow
55
12
1.25
0.001
191221.4
green
55
12
1.25
0.001
191221.5
orange
55
12
1.25
0.001
191221.6
blue
55
12
1.25
0.001
191220
dispenser
-
1
2.75
0.014
Safety labelling Permanent adhesion labelling to alert of risk or danger. Labels are shiny and fluorescent. In compliance with international safety standards.
1
2
mod.
code
description
1
901531
2
901533
3
901538
roll of 500 labels (labels size 25 x 25 mm) bag of 10 units 200 x 250 mm roll of 13 m x 25 mm
bag quantity
bag weight
bag volume
500
0.50
0.001
10
0.06
0.001
1
0.20
0.001
Adhesive labels White colour. Rolls of 5,000 units. Except 901030, rolls of 7,500 units. code
description
bag quantity
bag weight
bag volume
901031
54 x 36 mm printed
2 rolls
1.20
0.010
901031.2
EUROTUBO®
DELTALAB
54 x 36 mm plain
2 rolls
1.20
0.010
901041
50 x 30 mm printed
2 rolls
1.20
0.010
901016
50 x 30 mm plain
2 rolls
1.20
0.010
901030
35 x 25 mm printed
2 rolls
1.20
0.010
10. SAFETY
1. Evacuate the air by 2. Intake by pressing pressing the bulb, on point B as the drawing indicates.
3. Drain the liquid by pressing on point A
4. Blow out the pipette by pressing as the drawing indicates (point C).
B
EUROTUBO® Pipetting bulb
C
A
This one-handed design is the simplest safety pipette filler to use available. Manufactured in natural orange rubber. - Single hand use, only two operating points - Evacuate via the automatic valve - Standard model, accommodates all pipettes - Ability to clean inside of bulb by removing patented valve and rinsing out code
description
bag quantity
bag weight
bag volume
19200
pippeting bulb
1
0.10
0.002
121º C
Pipetting bulb Made of rubber. Used to avoid mouth pipetting and contamination risk. Can be opened, cleaned and autoclaved. Ideal for Wintrobe and Westergren pipettes. code
description
bag quantity
bag weight
bag volume
19201
red pippeting bulb
1
0.10
0.0021
Pipette pumps Several models for various pipette volumes. Designed for fast and efficient pipetting with simple, one handed operation. Pipettes fit smoothly into collar. Rotate the knurled thumb wheel on the side for precision filling or dispensing, and press the fast release lever for quick emptying. Easy to use and easily disassembled for cleaning. Sizes are colour coded. Pipette pumps resist acids and alkalies.
code
description
colour
bag quantity
bag weight
bag volume
W-100
up to 2 ml
blue
1
0.05
0.001
W-110
up to 10 ml
green
1
0.05
0.001
W-120
up to 25 ml
pink
1
0.05
0.001
Pipette pump support rack Made of acrylic resin and designed to keep in position 4 pipette pumps. The support is angled for quick placement and removal of pipettors. U-shaped channels and a lower deck provide secure and convenient storage. Suitable for the above pipette pumps. code
dimensions mm
bag quantity
bag weight
bag volume
W-150
109 x 208 x 144
1
0.45
0.004
EUROTUBO®
DELTALAB
165
166
10. SAFETY
c (PPE)
Safety glasses
Made of polycarbonate (1 mm thickness). Scratch resistant, antifogging, antistatic lenses. Protect against UV rays. With lateral vents. Conform to EN 166 standard. code
description
quantity
weight
volume
19385
glasses
5
0.34
0.005
c (PPE)
Safety glasses
Made of polycarbonate (1 mm thickness). Can be worn over conventional corrective glasses. Conform to EN 166 standard. code
description
quantity
weight
volume
19386
glasses
5
0.34
0.005
Emergency eyewash bottle Made of low density polyethylene, the bottle is flexible and easy to squeeze. The bottle has an eyecup with a snap-on cap. The eyecup has a perforated plate to break up the stream providing a gentle spray to the eye. A capped air vent valve prevents drawback of contaminated eye wash into bottle. Contaminated wash exits through a drain tube, which rotates in any direction. Instructions for use printed in various languages. Bottle capacity: 1 l. Supplied empty. code
capacity
case quantity
case weight
case volume
19384
1,000 ml
1
0.30
0.030
Emergency eyewash bottle with holder Made of low density polyethylene, the bottle is flexible and easy to squeeze. The bottle features an eyecup with a cap. The eyecup has a perforated plate to break up the stream providing a gentle spray to the eye. Contaminated eyewash drips into the container attached to the cap, thus preventing any liquid from entering the bottle. Includes a green 440 x 370 mm polystyrene holder. Supplied without screws. Bottle capacity: 1 l. Instructions for use enclosed. Supplied empty.
EUROTUBO®
DELTALAB
code
capacity
case quantity
case weight
case volume
19387
1,000 ml
1
0.65
0.021
10. SAFETY Absorbent paper This 120 gsm absorbent paper provides a total protection thanks to its two layers. The top side consists of a layer of cellulose of great liquid absorption power; the reverse side consists of a layer of polyethylene ensuring that it is completely waterproof. For use in the following applications: • laboratory trays and tables protection, • pathological anatomy laboratories, • seed germination (between-paper method), • spillage recovering using its leaktight surface, • particularly suitable for working with materials that are valuable (precious metals) or hazardous (toxic or corrosive materials). Paper thickness: 0.244 mm. Klemm absorption: 86 mm. Absorption: 170 g/m2.
code
description
case quantity
case weight
case volume
120003
50 m x 50 cm reel
1 reel
5.00
0.0165
120002
50 x 50 cm sheets
1x100 sheets
3.80
0.0100
Filter paper Our range of filter paper reams is made from high quality cellulose fibres to ensure a good resistance to humidity and a high absorption capacity. Pore diameter: +/- 30-40 microns. For use in the following applications: • laboratory worktop protection, • simple filtering operations for varied products, • labware sterilisation, • pharmaceutical product preparation.
code
sheet size cm
grammage
120010
50 x 50
73 g
thickness Klemm mm absorp. (mm)
0.151
89
case quantity
case weight
case volume
1x100 sheets
1.85
0.005
121º C
Silicone sheets 50 x 50 cm silicone sheets ideal as a laboratory benchtop protection or for use in autoclaves to protect any material. Easy cleaning with a wet cloth. Resists up to 260ºC.
code
thickness mm
bag quantity
bag weight
bag volume
350001
1
1
0.30
0.030
350002
2
1
0.60
0.030
350004
4
1
1.20
0.030
Silicone mat Made of red silicone, this mat will resist temperatures up to +260 ºC. Features a high adherence and anti-skid surface. For use over the benchtop or over laboratory stirrers to prevent beakers from slipping. Dimensions: 25 x 25 x 0.4 cm. code
description
bag quantity
bag weight
bag volume
900000
silicone mat
1
0.135
0.003
EUROTUBO®
DELTALAB
167
168
10. SAFETY
NEW
4 2
1 3
Blisters for transport of diagnostic samples Made of polypropylene . Supplied flat and stacked. These blisters offer a good protection for the transport of blood, urine and faeces samples, as well as for swabs. mod.
code
capacity
case quantity
case weight
case volume
1
120100
for 1 tube 10 ml
250
4.60
0.06
2
120101
for 2 tubes 10 ml
500
10.80
0.11
3
120102
for 6 tubes 5 ml / 3 tubes 10 ml
350
12.60
0.09
4
120103
for 1 container 50 ml
250
7.00
0.06
To meet the requirements of packaging instruction P650 a piece of absorbent paper (See page 167) should be included inside the secondary container (blister) to prevent any leakage.
NEW 121º C
Mailing container Mailing container with safety screw blue cap, both manufactured in polypropylene autoclavable. Leak proof. Dimensions uncapped 128 x 30 mm. Ideal for 10 ml tubes. The tube includes a piece of absorbent paper to prevent any leakage. Container and cap are sold separately.
EUROTUBO®
DELTALAB
code
description
case quantity
case weight
case volume
401301
mailing container
500
9.00
0.08
401302
screw cap
500
2.00
0.03
10. SAFETY
NEW
2
3
1
4
Blisters for transport of diagnostic samples Made of polypropylene. Supplied flat and stacked. These blisters offer a good protection for the transport of blood, urine and faeces samples, as well as for swabs. We recommend to insert a piece of absorbent paper inside the blister to prevent any leakage (see page 167).
mod.
code
capacity
case quantity
case weight
case volume
1
120104
for 1 swab
250
6.00
0.07
2
120105
for 7 swabs
200
8.00
0.15
3
120106
for 2 containers 30 ml
250
7.80
0.09
4
120107
for 3 containers 30 ml
200
8.40
0.09
NEW Multifunction bag Manufactured in polyethylene (125 microns). Useful for transporting different kind of samples and documents. It has a metal zip closure and a blue strip in the top. It can be used as many times as necessary. Long-lasting use.
code
description
case quantity
case weight
case volume
200338
bag 250 x 195 mm
100
2.00
0.007
See our wide range of bags in pages 84 - 91.
EUROTUBO®
DELTALAB
169
170
10. SAFETY
Isothermal bags Isothermal bags for the transport of biological samples, manufactured from PVC, nylon, LDPE, and polyurethane. The isothermal bags have two functions: keeping the temperature of samples from 8 to 12 hours while being transported, whatever the climatic conditions; protecting the samples and their contents. Available in green and blue colour. Description: for added security, isothermal bags feature three different locks: by velcro, by zip fastener and by a coded padlock for 40 l and 70 l models. Bags include the following elements: - an inner pocket designed to hold the cold packs, - a transparent outer pocket, at the front of the bag, for laboratory identification, - a transparent pocket, over the top of the bag, to insert documents. The included cold packs consist of HDPE packs filled with a non toxic gel. Before use, place cold packs in the freezer and keep at -20ºC/-24ºC for 24 hours. Cold packs will withstand temperatures as low as -80ºC for long-term storage. Quality features: - Bags manufactured from sturdy and shockproof materials. - Stand out from other isothermal bags existing on the market for their lightness and convenience. - Offer a total security seal thanks to padlock. - Space-saving and supplied folded in to reduce volume by 50 %. - To clean, simply use standard detergents. - Corners are rounded and reinforced by a double seam. - Handles are sewn all around the bag for increased strength. - Isothermal bags are traditionally manufactured (non-automated production), and each product undergoes rigid quality controls.
code
dimensions mm
capacity
colour
quantity
weight
volume
900073
230x230x170
6
green
1
0.92
0.008
900074
220x220x260
10
green
1
1.20
0.013
900075
220x220x260
10
blue
1
1.20
0.013
900076
390x250x280
27
green
1
1.30
0.027
900077
390x250x280
27
blue
1
1.30
0.027
900078
450x300x300
40
green
1
1.54
0.040
900079
450x300x300
40
blue
1
1.54
0.040
900081
420x420x400
70
blue
1
1.70
0.070
COLD PACKS: 6, 10, 27 y 40 l models include one cold pack; 70 l model includes 2 cold packs. PADLOCKS: 40 l and 70 l models include a coded padlock.
EUROTUBO®
DELTALAB
10. SAFETY c (MDD)
Wood tongue depressors
Tongue depressor with smooth rounded edges. Made from highquality wood to provide a smooth, splinter-free finish. Odour and taste-free. Maintains a high tensile strength. In addition to their traditional use, depressors can be used for spreading balms and ointments, for stirring liquids or mixing medicine, etc... The sterile models are supplied with "instructions for use". Adult size 15x2 cm. Children size 11.5x1 cm. description
bag quantity
adult
non sterile
50 x 100
15.00
0.030
40
adult
ethylene oxyde sterilized flow-pack
4 x 500
12.30
0.066
27
non sterile
100 x 100
15.00
0.032
40
code
size
441142 441242.2
441142.0 children
bag weight
bag cases volume per pallet
Sterile models are supplied with "instuctions for use"
c (MDD)
Plastic tongue depressors
Made of polystyrene. Colour: cream. Tongue depressor with smooth rounded edges. Odour and tastefree. Maintains a high tensile strength. More flexible than wood depressors. Features a ribbed finger rest for easy handling. In addition to their traditional use, depressors can be used for spreading balms and ointments, for stirring liquids or mixing medicine, etc... Size: 16 x 2 cm. code
bag quantity
description
bag weight
bag volume
cases per pallet
441142.1
non sterile
6 x 250
9.00
0.014
108
441142.2
ethylene oxyde sterilized flow-pack
4 x 500
12.00
0.066
27
Sterile models are supplied with "instuctions for use"
121º C
c (MDD)
Silicone tourniquet 0.8 thick and 19 mm wide. No toxic. Autoclavable. code
description
quantity
weight
volume
GS-01
roll of 50 meters
1 x 50
0.85
0.01
GS-02
box with 10 bands 0.5 m long each
1
0.10
0.001
1
2
3
c (MDD)
Hospital swabs
Cotton tip Ø 11mm. Swabs designed for cleaning and desinfection when tip is soaked in a desinfectant, thus reducing the risk of a direct contact between user’s hands and the wound or surface to clean. mod.
code
description
1
300234
2
300236
3
300237
wood + cotton 150 x 2,5 mm polypropylene + cotton 150 x 4 mm polypropylene + cotton 200 x 4 mm
case quantity
case weight
case volume
20 x 50
2,20
0,030
20 x 50
2,30
0,030
10 x 50
3,30
0,049
EUROTUBO®
DELTALAB
171
172
10. SAFETY
NEW
Hygienic aerosol It forewarns from hand-spreaded infections thanks to its antiseptic formula. It is composed by a pulverisation device (35 x 10 cm), made of ABS, and a 250ml interchangeable aerosol bottle (to be only used with the device). Characteristics: - Quick, efficient and practical system - Small, autonomous, and easy to use device - Easy to install in any place and in few seconds - No maintenance needed - Antiseptic diffusion by pulverisation - Active in 30 seconds over staphylococcus aureus, escherichia coli, enterococcus hirae - Instantaneous drying - Excellent cutanea tolerance - No risk of retro-contamination of the recipient
To be used over clean and dry hands in: - Hospital rooms - Medical cabinets, sampling rooms, nursing, white rooms... - Laboratories - Sanitary vehicles Composition and microbiological properties: - Ethanol 70% vol. - Qsp 100 ml, Camphor 0,20 g - Qsp 100 ml, Tartrazine 0,0002 g - Bactericide (pr EN 12054) - Active over Candida Albicans (NF EN 1275) - Propulsion gas = nitrogen (ecological) It may be installed using supplies already included in each unit: self-adhesive ribbon or screws.
code
description
case quantity
case weight
case volume
912000
250 ml aerosol bottle
12
3.5
0.009
913000
pulverisation device
1
0.14
0.003
c (MDD)
Alcohol pads
Desinfecting pads with 70% isopropyl alcohol, made from a smooth, fiber-free fabric. Ideal for use as an antiseptic for cleaning small areas. Supplied in aluminium bags.
EUROTUBO®
DELTALAB
code
dimensions
case quantity
case weight
case volume
192925
7 x 3.5 cm
20x100
3.00
0.010
10. SAFETY CHOOSE YOUR GLOVE SIZE - MEASURE YOUR HAND
Place the angle between thumb and index
Glove properties chart LATEX
NITRILE
VINYL
€
€€€
€€
Mechanical resistance - Perforation - Tearing Adequate for foodstuff handling Comfort Price
Glove chemical resistance chart Diluted mineral acids Hydrochloric acid Chromic acid Nitric acid Perchloric acid Phosphoric acid Sulphuric acid Concentrated acids Chlorhidric acid Chromic acid Nitric acid Sulphuric acid Hydrocarbon and oil by products Aniline White spirit Styrene Gasoline Hexane Paraffine Kerosene
Maximum resistance of nitrile gloves 125ºC. : Excelent; : Good; : Limited; : Not recommended These indications are solely for information. It is strongely recommended that the user carries out preliminay testings.
c (PPE)
Thermic safety gloves
Remove contents from autoclave immediately after finishing thanks to our all cotton, asbestos free gloves. They are ideal for taking hot objects out not only from the autoclave but also from the oven, … and handling them. Gauntlet with black sewn reinforcements at the edges for long lasting use. Heat resistant up to 230 ºC. Recommended for use in the lab, school, or industry. They may be used both with the washing and the drying machine. code
total lenght mm
sleeve lenght mm
bag quantity
bag weight
bag volume
400S
470
280
1 pair
0.35
0.003
EUROTUBO®
DELTALAB
173
174
10. SAFETY
c (PPE)
Safety gloves
Provide superior protection when handling hot, cold or damp objects.Made of strong non toxic silicone rubber which resists tearing and withstands temperatures from –55ºC up to 260ºC. Thumb and fingers fit into end pockets. The gripping surfaces have multiple concave tipped studs for non-slip grip (48+48 studs). code
dimensions mm
case quantity
case weight
case volume
19270
190 x 100
1
0.096
0.0005
c (MDD)
Nitrile gloves
Single use gloves made of Butadiene Nitrate (Nitrile). Grade A. High safety, waterproof gloves. 3 times more durable than latex gloves. Antistatic. Ambidextrous. Gloves are available powder-free or pre-powdered. 100 units per case. Minimum length: 280 mm, thickness 0.10 mm. AQL 1.5. In compliance with the EN 420 European standard and with the ASTM D 3578/95 American standard.
description
case quantity
case weight
case volume
8.00
0.030
code
size
402NP
small (6-7)
402NM
medium (7-8)
powder-free 10 x 100
8.00
0.030
402NG
large (8-9)
powder-free 10 x 100
8.00
0.030
powder-free 10 x 100
400NP
small (6-7)
pre-powered 10 x 100
8.00
0.030
400NM
medium (7-8)
pre-powered 10 x 100
8.00
0.030
400NG
large (8-9)
pre-powered 10 x 100
8.00
0.030
Cases per pallet: 72.
c (MDD)
Vinyl gloves
Single use gloves made of top quality polyvinyl. Grade A. Designed for general laboratory use. Ambidextrous. Hypoallergenic. Gloves are available powder-free or pre-powdered. Both models feature beaded cuffs. 100 units per case. Minimum length: 240 mm, thickness: 0.20 mm. AQL 1.5. CE CE Mark. In compliance with the EN 420 European standard and with the ASTM D 5250/92 American standard. size
description
case quantity
case weight
case volume
202VP
small (6-7)
powder-free
10x100
8.00
0.030
202VM
medium (7-8)
powder-free
10x100
8.00
0.030
code
202VG
large (8-9)
powder-free
10x100
8.00
0.030
200VSP
super small (5-6)
pre-powered
10x100
8.00
0.030
200VP
small (6-7)
pre-powered
10x100
8.00
0.030
200VM
medium (7-8)
pre-powered
10x100
8.00
0.030
200VG
large (8-9)
pre-powered
10x100
8.00
0.030
Cases per pallet: 72
EUROTUBO®
DELTALAB
10. SAFETY c (MDD)
Latex gloves
Single use gloves made from top quality latex. Grade A. Designed for general laboratory use. Ambidextrous and ergonomic. Gloves are available powder-free or pre-powdered. Both models feature beaded cuffs. 100 units per case. Minimum length: 240 mm, thickness 0.18 mm. AQL 1.5. In compliance with the EN 455 European standard and with the ASTM D 3578/95 American standard. size
description
case quantity
case weight
case volume
102LP
small (6-7)
powder-free
10x100
8.00
0.030
102LM
medium (7-8)
powder-free
10x100
8.00
0.030
code
102LG
large (8-9)
powder-free
10x100
8.00
0.030
100LSP
super small (5-6)
pre-powdered
10x100
8.00
0.030
100LP
small (6-7)
pre-powdered
10x100
8.00
0.030
100LM
medium (7-8)
pre-powdered
10x100
8.00
0.030
100LG
large (8-9)
pre-powdered
10x100
8.00
0.030
Cases per pallet: 72
Powder-free textured surface latex gloves
c (MDD)
Single use gloves made from top quality latex. Grade A. Designed for general laboratory use. Ambidextrous, ergonomic and powder-free. Finger and palm surface are designed for non-slip grip. Gloves feature beaded cuffs. 100 units per case. Minimum length: 240 mm , thickness 0.18 mm. AQL 1.5. In compliance with the EN 455 European standard and with the ASTM D 3578/95 American standard. code
size
case quantity
case weight
case volume
103LP
small (6-7)
10x100
8.00
0.030
103LM
medium (7-8)
10x100
8.00
0.030
103LG
large (8-9)
10x100
8.00
0.030
Cases per pallet: 72
c (MDD)
Blue latex gloves
First quality, Grade A, ambidextrous gloves. Pre-powdered. Supplied in 100 units boxes. AQL 1.5. Conforms to EN 455 (european standard) and ASTM 3578-91 (american standard) Recommended when differentiation with the classical gloves is required. code
size
case quantity
case weight
case volume
100LPA
small (6-7)
10x100
8.00
0.030
100LMA
medium (7-8)
10x100
8.00
0.030
100LGA
large (8-9)
10x100
8.00
0.030
Cases per pallet: 72
EUROTUBO®
DELTALAB
175
