Demand Products Catalog

Transcript

31 eifs catalog www.demandproducts.com CONTINUOUS INSULATION (CI) SPECIAL FEATURE Demand Products Product Index FASTENERS HOT KNIVES RASPS CHEMICALS FOAM CUTTING Page 6-11 Page 12-21 Page 26-29 Page 30-33 Page 52-57 Solutions in over 120 countries. FOAM RECYCLING WATER MANAGEMENT MIXERS / SPRAYERS HAND TOOLS CRAFT HOT WIRE CUTTERS How to Order Our products are available through distributors located throughout the world. If you cannot find a distributor in your area call or email us at [email protected] and we will assist you in finding one. Our operation hours are from 8:00 am to 5:00 pm Monday through Friday, EST. Our fax machines & email operate around the clock. FAX: I.888.534.8383 E-MAIL: [email protected] Warranty All of our products carry an unconditional 6 month guarantee, but Demand must be notified within 48 hours of receipt of defective or damaged merchandise or shortages. Any equipment or tools that are disassembled without prior written consent from Demand Products will have the warranty voided. Defective products will either be replaced or repaired at no charge. Abused tools will be repaired and returned only if the customer consents to charges in writing. Return Policy No merchandise can be returned without an authorization number. We do not accept returns on chemicals or coatings. Returns must be made within 15 days of invoice and must be in new condition. Materials returned must be shipped prepaid. Discontinued items, custom orders or items that have been out of our factory for 3 months or longer cannot be returned. Returns subject to minimum 15% restocking fee. Page 58-59 Page 34-35 Page 24, 25 & 64 Page 40-51 Page 66-67 Please Note — Disclaimer The products in this catalog are offered as options for the purchaser. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products. The product descriptions and/or photos described or shown may have changed since publication of this catalog and therefore information may be outdated. EIFS products in this catalog are sold through distributors or manufacturers only All property rights are reserved. Having no control over the use of the products in this catalog, we assume no liabilities connected with their use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use our products. Prices are subject to change without notice. ©2014 Demand Products, Inc. – Demand Products is a trademark of Demand Products, Inc., Alpharetta, GA 30004 USA 1.800.325.7540 EXPERT ADVICE DURARASPS HOTKNIVES HOTWIRE MACHINES BOW CUTTERS FASTENERS CI TOOL FOAM CUTTERS New tools for meeting the new codes for more energy efficient commercial buildings. New legislation* setting higher national and state standards for energy efficiency and re-setting commercial building energy codes in every state will create growing demand for continuous insulation (CI) products. We have the critical tools and know-how for assembling the essential equipment for you to meet the increased demand for high-efficiency, readily available insulation materials. To learn more about CI materials & methods for meeting the demand from the change in national, state and local building energy codes contact Demand Products at 1.800.325.7540 or [email protected]. * The U.S. Department of Energy (DOE) mandates all states must enforce a commercial building energy code that meets or exceeds ASHRAE Standard 90.1-2010 effective Oct. 18, 2013. Continuous Insulation (CI) What is CI? Continuous Insulation is different from what has been, more or less, the conventional approach of insulating spaces between framing studs. Non-continuous insulation inevitably creates pockets and gaps and air leakage resulting in ‘thermal bridging’ that can cost a typical steel frame wall up to 50 percent of its R-value and up to 24 percent or more of the R-value of a wood frame wall. Those losses are so great they can not be made up (or meet the new code) simply by adding thicker cavity insulation. As you can see, Continuous Insulation offers a significant savings and a dramatic solution for commercial buildings everywhere. Continuous Insulation is made up of either Expanded Polystyrene (EPS) of Extruded Polystyrene (XPS) CI Mandate Effects 90% of New US Building Sites CODE REQUIRMENT: R-13 CAVITY BATT + R 3.8 CI OR + R 7.4 CI CODE REQUIRMENT: R-13 CAVITY BATT WITH NO CI Web Resources for CI www.ashrae.org www.iccsafe.com www.energycodes.gov Demand Products CI Solutions DP300CI and Zinc Coated Screw Assembled with Washer for CI Installation Item# DPCI-0 DPCI-1 DPCI-15 DPCI-2 Size 1 1/4” 1 5/8 “ 2” 2 1/2” Description Steel Screw w/ DP300CI Steel Screw w/ DP300CI Steel Screw w/ DP300CI Steel Screw w/ DP300CI DP300CI Designed for all foams: EPS, XPS, Pink & Blue Boards and PolyIso Insulation .625” 1“ 1 1/2” 2” Qty 1000 1000 1000 1000 CI Washers for Rigid and Soft Foam Item# DP300CI DP400CI Description CI Washer CI Washer DP400CI Designed for soft foams: EPS, PolyIso Qty 1000 1000 Q&A Why CI? It’s a simple equation. Continuous insulation works. It works as an integral element in implementing Exterior Insulation and Finish Systems (known as EFIS). Architects and developers have experience with EFIS as an alternative or replacement for stucco. Now, they are recognizing how EFIS and utilizing continuous insulation is a tremendous approach to meeting the new, higher energy efficient commercial building codes. Bottom line; continuous insulation is an all-around winner. US Department of Energy Mandate US Department of Energy (DOE) mandated all affected states must update their commercial building code to meet or exceed American Society of Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE) standard 90.1-2010 STEEL STUDS INSULATION exterior sheathing interior drywall EPS OR XPS BOARD CI thickness minimum of .625” (4.1 R-Value) up to 2” (13.0 R-Value) maximum, board sizes from 2’ x 4’ up to 4’ x 12’ CI FASTENER exterior cladding Look for Icon for Specialized CI Tools CI TOOL PBH & PB PBH™ Washer The Builder’s Choice Available in Boxes 500 or 1000 • 2” Diameter • Manufacturer Approved • Cone Design Prevents Popups • White — No Color Bleed Thru • Finger Closures • Eliminates Thermal Shorts • Large Keyholes for Strong Mechanical Bonding Item # Description PBH PBH Washer PBH500 PBH Washer Qty Per Box Price 1,000 500 89.00 54.00 Fastener Patterns & Windload Specs on Pages 9,10 & 11 PB™ Washer Polymer Based System Washer • 2” Diameter • Large Keyholes for Strong Mechanical Bonding • White — No Color Bleed Thru • Manufacturer Approved • 20 Year Warranty • Finger Closures • Cone Design Prevents Popups • Eliminates Thermal Shorts Item # Description Qty Per Box Price PB PB500 PB Washer PB Washer 1,000 500 109.00 64.50 6 Available in Boxes 500 or 1000 WASHERS PBH w/Wood/Lite-Metal Screw WOOD/LITE-METAL Insulation Thickness PBH and Wood/Lite-Metal Screws, Assembled with Washer for Wood and Lite-Gauge Metal Application, 20- to 26-gauge WH1 15⁄8” 1” 1,000 16 lbs 135.00 WH2 2” 11⁄2” 1,000 18 lbs 145.00 WH3 21⁄2” 2” 1,000 20 lbs 155.00 WH4 3” 21⁄2” 1,000 22 lbs 175.00 WH6 4” 3-31⁄2” 1,000 39 lbs 245.00 WH7 5” 4-41⁄2” 1,000 47 lbs 320.00 WH8 6” 5-51⁄2” 1,000 56 lbs 360.00 PBH Washer with Steel Screw 20 to 26 GAUGE SH2 SH3 SH4 SH5 SH6 2” 25⁄8” 3” 4” 5” Insulation Thickness PBH and Steel Screws, Assembled with Washer for Heavy-Gauge Metal Application, 12- to 20-gauge SH1 15⁄8” 1” 1,000 17 lbs 11⁄2” 2” 21⁄2” 3”-31⁄2” 4”-41⁄2” 1,000 1,000 1,000 1,000 1,000 155.00 165.00 189.00 219.00 285.00 410.00 19 lbs 21 lbs 24 lbs 36 lbs 48 lbs PBH with Tapcon™ Screw PBH and Masonry Screws, Assembled with Washer for Concrete and Masonry Application 13⁄4” 21⁄4” 23⁄4” 31⁄4” 4” 5” 1” 11⁄2” 2” 21⁄2” 3” 4” Insulation Thickness MH1 MH2 MH3 MH4 MH5 MH6* 1,000 1,000 1,000 1,000 1,000 1,000 20 lbs 24 lbs 26 lbs 28 lbs 32 lbs 38 lbs 299.00 339.00 359.00 439.00 595.00 1,059.00 STEEL 12 to 20 GAUGE PB Wood/Lite-Metal Screw 15⁄8” 2” 21⁄2” 3” 4” 5” 6” Insulation Thickness W1 W2 W3 W4 W6 W7 W8 1” 11⁄2” 2” 21⁄2” 3-31⁄2” 4-41⁄2” 5-51⁄2” 1,000 1,000 1,000 1,000 1,000 1,000 1,000 LITE-METAL WOOD PB and Wood/Lite-Metal Screws, Assembled with Washer for Wood and Lite-Gauge Metal Application, 20- to 26-gauge 17 lbs 19 lbs 21 lbs 23 lbs 31 lbs 39 lbs 45 lbs MASONRY - SOLID OR BRICK PB Washer with Steel Screw Insulation Thickness PB and Steel Screws, Assembled with Washer for Heavy-Gauge Metal Application, 12- to 20-gauge S1 15⁄8” 1” 1,000 17 lbs S2 2” 11⁄2” 1,000 19 lbs S3 25⁄8” 2” 1,000 21 lbs S4 3” 21⁄2” 1,000 24 lbs S5 4” 3”- 31⁄2” 1,000 36 lbs S6 5” 4”- 41⁄2” 1,000 38 lbs S7 6” 5”- 51⁄2” 1,000 45 lbs 20 to 26 GAUGE PB with Tapcon™ Screw Insulation Thickness PB and Masonry Screws, Assembled with Washer for Concrete and Masonry Application M1 13⁄4” 1” 1,000 20 lbs M2 21⁄4” 11⁄2” 1,000 24 lbs M3 23⁄4” 2” 1,000 26 lbs M4 31⁄4” 21⁄2” 1,000 28 lbs M5 4” 3” 1,000 32 lbs M6* 5” 4” 1,000 38 lbs * Does not include drill bits STEEL 12 to 20 GAUGE MASONRY - SOLID OR BRICK www.demandproducts.com • 1-800.325.7540 7 WASHERS DP 300 Washer CI All Purpose PM Washer • Low Profile Design. Seats Flush • Key Holes Create Strong Mechanical Bond • Large 13/4” Head Diameter • Strong Polypropylene Material Provides TOOL Impact Resistance and Long Life • Use for Lath and Plastic Lath Attachment Item # DP300 ITEM # DP400 QUANTITY PER BOX 1,000 Approx. Weight 6 lbs Qty Per Box 1,000 Approx. Wt 6 lbs DP 300 Washer PRICE Pre-Assembled with Wood Screw 45.00 Item # D3W1 D3W2 D3W3 Insulation Size Thickness 1” 15/8” 11/2” 2” 1/2 2” 2 ” Qty Per Box 1,000 1,000 1,000 Approx. Wt 14 lbs 16 lbs 18 lbs Other type and size pre-assembled screws are available upon request. DP 400 Washer Time Saving Pre-Spot Stem • Low Profile Design. Seats Flush • Key Holes Create Strong Mechanical Bond • Large 13/4” Head Diameter • Strong Polypropylene Material Provides Impact Resistance and Long Life Item # DP400 Qty Per Box 1,000 Approx. Wt 6 lbs Fastener Patterns & Windload Specs on Pages 9, 10 & 11 The DP300 & DP400 secures rigid insulation to multiple substrates Wire Lath 8 Wire Mesh Fiber Mesh Continuous Insulation WASHERS DP500 Tab Washer Foam Tack Fastener • G90 Chromium Plated • Meets ASTM A653 Standard • Pre-Spot Tabs • 11/4” Diameter Plate • Can be Screwed, Nailed or Shot • Works Well with Multiple Substrates • Covers Many Rigid Insulation Applications Item # Description TAC75 TAC112 TAC134 34 Great for Lath & Stucco Item # DP500 Holds Foam to Foam Price Qty Per Box Approx. Wt 1,000 6 lbs 45.00 ITEM QUANTITY Approx. PRICE # PER BOX Weight DP400 1,000 6 lbs 45.00 ITEM # DP400 QUANTITY PER BOX 1,000 Approx. Weight 6 lbs Price ⁄ ” Trim to Foam Trim Tac (Pak of 250) 15.00 11⁄2” Foam to Foam Insul Tac (Pak of 250) 15.00 13⁄4” Foam to Foam Arrow Tac (Pak of 250) 15.00 TAC75PRICE TAC112 TAC134 45.00 WT1 WT158 Wall Tac™ DP525 Washer EPS Foam Auger Anchor • Holds Trim to Foam • Mechanically Attaches Control Joint • Grip-Guard Galvalume Coated Steel • Helps Stabilize and Re-Support Old Plaster • 11/4” Diameter Plate • .023 to .025 Gauge with 4 Keyholes • Edges Taper Toward Work Area • Tapered Edge Will Not Catch Trowel Edge • For Downspouts, Lights, Fixtures, etc. • High-Strength Plastic Construction Holds Trim & Joints Plaster Repair Washers to Substrate Foam Insulation • Allows Control Joints to Move with Foam Insulation Item # WT1 WT158 Size 1” 15/8” Qty Per Box 1,000 1,000 Approx. Wt 3 lbs 5 lbs Spiral Anchoring to EIFS ™ Price Item # 65.00 DP525-1 75.00 DP525 Qty Per Box 100 1,000 Approx. Wt 1 lb 6 lbs Price 10.00 55.00 with Foam Washer • 1 1/2” Deep x 1” Wide, 1/8” Foam Washer • No Thermal Bridging • Can Be Installed with Commercial Drill Item # SD10 Qty Per Box 10 Approx. Wt 1 lb Windload Specs for PB, PBH, DP300 & DP400 Washers Testing was performed by Underwriters Laboratories per ASTM E330 and E331. Procedure B. Demand PB Washer & PBH Washers Fastener Pull-Through Results in Average Pounds Ultimate Tapcon Dec-King 401 410 S-12 427 Insulation Pull-Over Results in Aver. Pounds Ultimate (1 Lb Density EPS) 1” 85.6 11/2” 93.6 2” 108 The 2”diameter increases windload resistance and has 25% more pullover value than 1 3⁄4” washers. Structural performance tests conducted with ASTM E-330. Average ultimate negative load was -97 PSF. DP300 Washers SPECIFICATIONS: Diameter: 1 3⁄4” Material: Polypropylene Push Through @ 10° 256 lbs. Push Through @ 180° 177 lbs. Pull Over 50.8 lbs. @ 10° Pull Over 122.4 lbs. @ 180° DP400 Washers SPECIFICATIONS: Diameter: 1 3⁄4” Material: Polypropylene Push Through @ 10° 256 lbs. Push Through @ 180° 177 lbs. Pull Over 50.8 lbs.@ 10° Pull Over 122.4 lbs. @ 180° www.demandproducts.com • 1-800.325.7540 9 Price 10.00 55.00 MASONRY • Unique Textured 25/16” Thin Profile Head Locks Coatings with Multiple Key Holes • Polypropylene      Plastic   • Flex Lock Rings Insure Excellent Pullout Values ™ • Reinforced Ribbed Shank for Strength • Requires a / ” Drill Bit 5 16 Congrip Quickest & Best Way for Fastening to Concrete • Large 2 5/16” Head • Reduces Installation Time By Up To 40% • Installs Quickly • Strong Pullout Values • Eliminates Thermal Shorts • Requires a 5⁄16” Drill Bit Item # CG0 CG1 CG2 CG3 CG4 CG5 Length 2” 23/4” 31/2” 41/4” 5” 53/4” Qty Per Box 250 250 250 250 250 250 Price 106.68 124.25 128.60 274.88 365.96 417.98 Congrip Fastener Technical Data for Hollow & Solid Block Hollow Minimum Anchor Bit Embedment Insulation Item # Length Diameter Depth (in.) T hickness 5 CG0 2” ⁄16” 11⁄8” 1” 3 5 CG1 2 ⁄4” ⁄16” 11⁄8” 11⁄2” 5 CG2 31⁄2” ⁄16” 11⁄8” 2” 1 5 CG3 4 ⁄4” ⁄16” 11⁄8” 21⁄2” – 3” 5 CG4 5” ⁄16” 11⁄8” 31⁄4” – 31⁄2” 3 5 CG5 5 ⁄4” ⁄16” 11⁄8” 4” – 43⁄4” Solid Average Ultimate Pullout Minimum ** Hollow Insulation *Concrete Concrete Brick Thicknes Block 0” – 7⁄8” 110 45 55 7 ⁄8” – 13⁄4” 110 45 55 2” – 23⁄8” 110 45 55 23⁄4” – 31⁄8” 110 45 55 31⁄2” – 4” 110 45 55 4” – 43⁄4” 110 45 55 *Concrete Strength f’c = 2500 psi **Hollow Concrete Block meets ASTM SPEC C90 Grade N Type II. Pullout values may be limited by the strength of the material fastened. Washer Placement Patterns PB & PBH Washers Structural Substrates Such as Wood Sheathing, Concrete, Masonry & Metal Siding Wood, Plywood, Metal Siding, Masonry and Concrete 6” 12” 12” 12” Wind Load Capacity 6” 6” 12” 24” 6” 48” 8” 16” 16” 8” 4” 8” 8” 48” 24” 4” Non-Structural Sheathings such as OSB, Gypsum, Dens-Glass Gold 10 8” 8” 8” 8” 8” 8” (Average Ultimate PSF, Negative Pressure 1.0 Lb. EPS 1” Pattern A 83 Pattern B 85 11/2” 105 104 These spacing patterns are general guidelines for mechanical installation of EPS to different substrates when used in conjunction with a typical EIFS system or similar systems. Construction projects vary and yours may be different from these fastener suggestions. Please consult your EIFS manufacturer when using Demand fasteners along with adhesives.  For additional information call Demand Products Technical Services at 1-800-325-7540 8” 6” 12” 24” 6” 48” 4” 10” 10” 10” 10” 4” 4” 8” 8” 48” 24” 4” Structural Substrates Such as Wood Sheathing, Concrete, Masonry & Metal Siding PREMIUM SCREWS Wood-Lite Metal For Use with Wood & Metal For Use with Wood & Metal From 26-gauge to 20-gauge Premium Coated Screws For Use with Steel For Use with Concrete Masonry Steel 10 FREE MDB55 Drill Bits per box of 1,000 Screws From 20-gauge to 12-gauge Wood-Lite Metal – Climacoat Coated Steel – Climacoat Protection For Use with Wood & Metal from 26 to 20-Gauge. For Use with Steel from 20 to 12-Gauge Studs. For Use with Concrete Block, Poured Concrete, or Masonry. Item # WS1 WS2 WS3 WS4 WS6 WS7 WS8 Item # SS1 SS2 SS3 SS4 SS5 SS6 SS7 Item # MS1 MS2 MS3 MS4 MS5 MS6** TM Length 7 X 15/8” 8 X 2” 8 X 21/2” 8 X 3” 8 X 4” 10 X 5” 10 X 6” Qty Per Box 1,000 1,000 1,000 1,000 1,000 1,000 1,000 TM Price 28.50 38.95 49.25 65.00 138.75 175.00 225.00 Length 6 X 15/8” 6 X 2” 8 X 25/8” 8 X 3” 10 X 4” 10 X 5” 10 X 6” Qty Per Box 1,000 1,000 1,000 1,000 1,000 1,000 1,000 Price 36.95 49.50 23.50 104.75 159.25 265.00 434.25 Masonry – Climaseal Protection TM Length Qty Per Box 1,000 3/16 x 13/4” 1,000 3/16 x 21/4” 1,000 3/16 x 23/4” 1,000 3/16 x 31/4” 1,000 3/16 x 4” 1,000 1/4 x 5” Price 183.75 215.00 235.00 320.00 475.00 918.75 *10 free MDB55 Drill BIits per box of 1,OOO screws. ** Drill Bit Not Included Screw Pullout Performance Data Solid Concrete Fastener Depth of Embedment in Solid Material (inches) Diameter 1” 11⁄4” 11⁄2” 13⁄4” (conforms to ASTM C-548 & C-1002) Nominal Gauge 26 24 22 20 (conforms to ASTM C-954 & C-548) Nominal Gauge 18 16 14   12 Pullout Strength 120 183 248 296 Pullout Strength 471 679 847 1225 (1⁄4” Minimum Through Penetration) (1⁄4” Minimum Through Penetration) ⁄ ” 3 16 341 581 863 1059 Test #CH3932/Pittsburgh Testing Laboratories Coating: CLIMASEAL™ for masonry/concrete fasteners only Corrosion Resistance: Kestemich Results (Din 50018, 2.OL) • 30 cycles - 10% or less red rust. Salt Spray Results (ASTM B117) • 720 Hours -10% or less red rust. Hollow Block Fastener Depth of Embedment in Solid Material (inches) Diameter 1” 11⁄4” 11⁄2” 13⁄4” ⁄ ” 3 16 *209 *357 *468 *547 Test #CH3748/Pittsburgh Testing Laboratories Coating: CLIMASEAL™ for masonry/concrete fasteners only Corrosion Resistance: Kestemich Results (Din 50018, 2.OL) • 30 cycles - 10% or less red rust. Salt Spray Results (ASTM B117) • 720 Hours -10% or less red rust. Coating: CLIMASEAL™ for masonry/concrete fasteners only Coating: CLIMACOAT™ Corrosion Resistance: Kestemich Results (Din 50018, 2.OL) • 30 cycles - 10% or less red rust. Corrosion Resistance: Kestemich Results (Din 50018, 2.OL ) • 20 cycles Salt Spray Results (ASTM B117) • 720 Hours -10% or less red rust. 10% or less red rust. Salt Spray Results (ASTM B117) • 500 hours - 10% or less red rust for wood, lite-metal and steel fasteners. *Note 1: Masonry must be pre-drilled 1⁄2” deeper than fastener penetration. *Note 2: Hardness of masonry varies and the standard drill bit may not always drill the adequate hole. Please consult Demand Products for assistance in proper drill bit diameter. Please Note: The pullout values listed are the ultimate averages achieved under laboratory conditions. An appropriate safety margin factor should be applied to these values to achieve a design value. 11 HOT KNIFE CR Hot Knife™ CR CutRite™ HEATS UP TO 10” WIRE Complete with Case CI TOOL • 150 Watts • Includes 4” & 6” Blades and Case • Electronic Circuit Board Powered • Variable Power Control • Lightweight • Stamped Blades • Spring Loaded Safety Trigger Item # HKTCR Description Hot Knife™ CR & Blade Adapter w/ 4” & 6” Blades 200CR 2” Blade 400CR 4” Blade 600CR 6” Blade HDC220 220 Volt Converter HKTCRP01 Blade Adapter HKTCR 2”, 4” & 6” Blades Available ADJUSTABLE HEAT DIAL Comes Complete with 4” & 6” Blades, Custom Blade Adapter, Cleaning Brush and Case STOPS HKTCRP01 Custom Blade Adapter 12 G50 G75 G100 G75SP SPV SPSQ 250 300 450 550 STOPL All of these Custom Blades will fit your Hot Knife™ CR CutRite™ using the Blade Adapter ACCESSORIES 6” Groove Adapter 1” Groove Adapter Item # CR6G NWFW Item # CR1G NWFW Blades Up to 6” Wide Blades Up to 1” Wide Description Hot Knife™ CR 6” Groover Plate Flat Wire, per foot Description Hot Knife™ CR 1” Groover Plate Flat Wire, per foot CI TOOL Hot Knife™ CR Pro Kit Everything You Need Hot Knife™ CR CutRite™ Kit Super Value Saves Money Description KITCR6G Hot Knife™ Kit Item # Description KITPROCR Hot Knife™ Kit Wire Cutting Tool Crimping Tool • Kit Includes: Wire Crimper & 10’ of NWFW Flat Wire • Quality Chrome Plated Precision • 10’ NWFW Wire & Shaping Tool Cuts NWFW Wire Item # Description Price WCUT Wire Cutting Tool 52.00 TOOL Kit Includes: Hot Knife™, 4” and 6” Blades, 6” Groove Adapter, 3 Feet of NWFW Wire, Crimping Pliers , 6” DuraRasp™ and Canvas Bag. Kit Includes: Hot Knife, 4” and 6” Blades, 6” Groove Adapter, 3 Feet o­­f NWFW Wire and Case. Item # CI Price 395.95 Precise Bends in NWFW Wire Item # Description WCP KITWCP10 Wire Shaping Tool Shaping Tool Kit KITWCP10 WCUT WCP www.demandproducts.com • 1-800.325.7540 13 HOT KNIFE The Original Hot Knife TM CI TOOL • 105 Watts • Transformer Powered • Lightweight — Only 1 Pound • High Quality Blades with     Post Mounts Not Stamped • Spring Loaded Safety Trigger • Blades Sold Seperately HKT450 STOPS Item # Description HKT HKT250 HKT300 HKT450 HKT550 HKTG75 250 300 450 550 G50 G75 G100 G75SP SPV SPSQ STOPS STOPL CASEH CASEA HKTT HKT20 Hot Knife™ Tool, 105 Watts Hot Knife™ Tool, w/ 2.5” Blade Hot Knife™ Tool, w/ 3.0” Blade Hot Knife™ Tool, w/ 4.5”Blade Hot Knife™ Tool, w/ 5.5”Blade Hot Knife™ w/3/4 Curved Blade 2.5” Straight Blade 3.0” Straight Blade 4.5”Straight Blade 5.5”Straight Blade 1/2” Curve Blade 3/4” Curve Blade 1” Curve Blade 3/4” Curve Blade w/ Lip 3/4” V Groove w/ Lip 3/4” Square Groove w/ Lip Short Ceramic Depth Stop Long Ceramic Depth Stop Hot Knife™ Hard Case Hot Knife™ Aluminum Case Hot Knife™ Trade In Hot Knife™ Tool, 220 Volts* *INTERNATIONAL TOOL G75 G50 G100 G75SP SPV SPSQ 250 300 450 550 STOPL HEATS UP TO 10” WIRE Hot Knife™ 4” Adapter Vertical Adapter with Guide • Vertically Positions the Hot Knife™ • Handles up to 4” Wide NWFW Blades Item # GJA3G NWFW Description Adapter Flat Wire, per foot Price 150.00 10.00 GJA4G GJA3G 4” 4” Hot Knife™ 4” Adapter Horizontal Adapter with Guide • Horizontally Positions the Hot Knife™ • Handles up to 4” Wide NWFW Blades 14 Item # GJA4G NWFW Description Adapter Flat Wire, per foot Price 225.00 10.00 ACCESSORIES Hot Knife™ Kit 1 Shaping Wire Tool Master Kit Precise Bends in Flat Wire • Cuts both Expanded and Extruded Foam • Cuts Fast, Clean and Accurately • Heats Up In Seconds • Highest Quality Blades in the Industry • Kit Includes: Hot Knife™ 250, 300, 450, 550, G50, G75, G75SP, SPV, G100, SPSQ Blades, Long Stop, Short Stop & Hard Case Item # Description KITHKK KITHKKA KITHKK220 Master Hot Knife™ Kit Kit w/ Aluminum Case Hot Knife™ Kit, 220 Volts* • Kit Includes: Wire Crimper & 10’ of NWFW Flat Wire Item # Description WCP KITWCP10 Wire Shaping Tool Shaping Tool Kit Price 20.00 105.00 WCP Hot Knife™ Kit 2 Vertical Tool Buddy Adapter Kit • Hot Knife™ • 41/2” Blade • 2’ NWFW Wire • Carrying Case • GJA3G Groove Jet™ Adapter Item # Description KITHKTB KITHKTBA KITHKTB20 Tool Buddy Vertical Kit Kit w/ Aluminum Case Hot Knife™ Kit,220 Volts* Specially Designed Head Gives Clean Crisp Corners ™ SHAPE YOUR OWN BLADES Hot Knife™ Kit 3 Hot Knife™ Adapter Kit Horizontal Tool Buddy Adapter Kit Sculpter’s Flat Wire Adapter • Hot Knife • 4 ” Blade • 2’ NWFW Wire • Carrying Case • GJA4G Groove Jet™ Adapter ™ • Wire Adapter Posts • Allen Wrench • 12” NWFW Wire • Hot Knife Sold Separately 1/2 Item # Description KITHKTB4 KITHKTB4A KITHKTB204 Tool Buddy™ Horizontal Kit Kit w/ Aluminum Case Hot Knife™ Kit,220 Volts* Item # FWA10 Hot Knife™ Carrying Cases Description Adapter Price 56.00 *INTERNATIONAL TOOL Hard Shell or Aluminum Item # CASEH CASEA Description Hot Knife™ Hard Case Hot Knife™ Aluminum Case Price 25.00 60.00 Tools Not Included Plastic Hard Case CASEH Aluminum Case CASEA Shape your Own Blades for Sculpting Up to 10” www.demandproducts.com • 1-800.325.7540 15 GROOVE JET Groove Jet™ 300 Hot Knife Aesthetic Groove Cutter • Weights Only 4 Lbs. • Handles Up to 5” x 3” NWFW Blades • Heats Up Fast • Cuts Clean with One Pass • Also Available in 220 Volts • Blade Positioned Up Front Item # Description KITGJ300 NWFW Groove Jet™ Flat Ni-Chrome Wire-per ft. Cuts All The Way To Inside Corners KITGJ300 With Guide HEATS UPTO 11” WIRE GJASB Blade not included Straight Blade Adapter Groove Jet™ Kit Fits our Groove Jet™ • GJ300 Groove Jet™ • 10’ NWFW Flat Wire • Carrying Case Item # Description GJASB 300 450 550 Straight Blade Adapter 3” Straight Blade 41/2” Straight Blade 51/2” Straight Blade Most Popular Grooving Kit • Adapts Groove Jet™ to Use Straight Blades • Adapts Either Our 3”, 41/2” or 51/2” Blade to the Groove Jet Item # Description KITGJ3K Groove Jet™ w/ Hard Shell Case KITGJ3KA Groove Jet™ w/ Aluminum Case Aluminum Case Plastic Hard Case 20”W 9”H 8”D 17”W 5.5”H 12”D Groove Jet™ Cases • Tools Not Included Item # Description CASEA 55.00 Aluminum Case 17” W x 5.5” H x 12” D 50.00 Plastic Case 20” W x 9” H x 8” D CASE 16 Price BLADES Groove Tool Handle & Accessories Inserts Handle, Custom Blades, Custom Inserts & Blade Kit Item # GTH02 GJBCUSTOM GTICUSTOM Handle Description Groove Tool Handle Custom Blade (Pkg of 3) Custom Insert (each) *CUSTOM SIZES AVAILABLE Blades GTH02 Square Groove Tool Blades & Sled Kits Hot Knife Blades Nylon Sleds Item # KITS-103 KITS-201 KITS-203 Item # GBS-103 GBS-201 GBS-203 Item # GIS-103 GIS-201 GIS-203 Dimensions 1 X 3/4” 2 X 1” 2 X 3/4” Dimensions 1 X 3/4” 2 X 1” 2 X 3/4” Dimensions 1 X 3/4” 2 X 1” 2 X 3/4” Angled Groove Tool Blades & Sleds Kits Hot Knife Blades Nylon Sleds Item # KITA-102 KITA-152 KITA-201 Item # GBA-102 GBA-152 GBA-201 Item # GIA-102 GIA-152 GIA-201 Dimensions 1 X 1/2 X 1/2” 1 1/2 X 1/2 X 1/2” 2 X 1 X 1” Dimensions 1 X 1/2 X 1/2” 1 1/2 X 1/2 X 1/2” 2 X 1 X 1” Dimensions 1 X 1/2 X 1/2” 1 1/2 X 1/2 X 1/2” 2 X 1 X 1” Beveled Groove Tool Blades & Sleds Kits Item # KITB-154 KITB-201 Dimensions 1 1/2 X 3/4 X 1” 2 X 1 X 1 3/8” Hot Knife Blades Price Item # GBB-154 GBB-201 Dimensions 1 1/2 X 3/4 X 1” 2 X 1 X 1 3/8” Nylon Sleds Price Item # GIB-154 GIB-201 Dimensions 1 1/2 X 3/4 X 1” 2 X 1 X 1 3/8” Price V Groove Tool Blades & Sleds Kits Hot Knife Blades Nylon Sleds Item # KITV-175 KITV-5050 KITV-7575 Item # GBV-175 GBV-5050 GBV-7575 Item # GIV-175 GIV-5050 GIV-7575 Dimensions 1 X 3/4” 1/2 X 1/2” 3/4 X 3/4” Custom Blades and Base & Finish Inserts are Made to Order Length 1 X 3/4” 1/2 X 1/2” 3/4 X 3/4” Dimensions 1 X 3/4” 1/2 X 1/2” 3/4 X 3/4” www.demandproducts.com • 1-800.325.7540 17 ZETZ Zetz 20™ Thermocutter • Excellent for Cutting Rubber, Polyethylene & Polypropylene • Electronic Circuit Board Powered • Heats Up Quickly • Adjustable Temperature Control • Off-On Finger Control • 110 Volts. Also Available in 220 Volts • Cuts Materials Up to 5” Thick Item # Description ZTC20 Z50 Z100 Z200 Thermocutter 2” Blade (Pack of 6 Blades) 4” Blade (each) 8” Blade (each) Variable Heat Control ­ZTC20 Comes with One Z50 Blade Off/On Trigger Price 450.00 55.80 11.40 12.90 Z50, 2” Blade Z100, 4” Blade Z200, 8” Blade Please Note: Other Blades Available Cuts Carpet Clean and Fast! Z etz S pecialty Blades #Z06 $12.90 #Z40 Rounded edge to glide along cutting surface. Heat seals the edges to prevent fraying of synthetic fibers and textiles. 0.6 mm Thick 3 mm Cutting Edge $14.70 Wide blade back and reinforced cutting flange for stable cutting. High temperature blade is designed for heat sealing the cut edges. 0.6 mm Thick 40 mm Cutting Edge #Z35 #Z45 $17.20 Long pointed blade flanges. Ground both sides for twodirectional cuts. For cutting around templates. Also for deburring. 1.0 mm Thick 35 mm Cutting Edge #Z45:0.8 mm Thick 45 mm Cutting Edge Designed for Industrial Operations Item # Description ZETZ24 Z75 Z120 Industrial Thermocutter 3” Blade (each) 43/4” Blade (each) Please Note: Other Blades Available 18 #Z70 28.90 Curved cutting edge and thick blades. High temp blade for long cuts under pressure. *#Z70 blade for Zetz 24 only. Zetz 24™ • Excellent for Cutting Rubber, Polyethlyne & Polypropylene • Heats Up Quickly • Variable Heat Control • Remote HD Transformer with Extra Long 91/2 Foot Cable • 110 Volts. (Also Available in 220 Volts) • Cuts Materials Up to 5” Thick $28.90 ZETZ24 Comes with 3” Z75 Blade #Z70:1.0 mm Thick 70 mm Cutting Edge HOT ROD Hot Rod™ Super Duty 50 Amp EPS Panel Cutter • Strongest in the Industry • Cuts All Day Long Without Overheating • Uses Heavy Gauge Round and Flat Wire As Well As Standard Hot Knife Blades • Variable Heat Control — Heats Up Extremely Fast • Remote HD Transformer with Extra Long 9 Foot Cable • Excellent for SIP’s, ICF, EIFS or In-Plant Production Applications • Heats From 8” to 24” of NWFW Wire • 110 Volts. Also Available in 220 Volts Item # Description *HR KITHRK *250 *300 *450 *550 *600CR *800 *G50 *G75 *G100 *G75SP *SPV *SPSQ *HRP10 *STOPS *STOPL Hot Rod™ Only, 110 Volts (60 Hertz) Hot Rod™ Kit Includes *items below 21/2” Straight Blade 3” Straight Blade 41/2” Straight Blade 51/2” Straight Blade 51/2” Straight Blade (Open Mount) 71/2” Straight Blade (Open Mount) 1/2” Curve Blade 3/4” Curve Blade 1” Curve Blade 3/4” Curve Blade w/ Lip 3/4” V Groove w/ Lip 3/4” Square Groove w/ Lip Hot Rod™ Blade Adapter Short Ceramic Stop Long Ceramic Stop HR 600CR - 51/2” 800 - 71/2” STOPL G50 G75 G100 G75SP SPV SPSQ * INCLUDED IN KIT ** INTERNATIONAL TOOL GJA3G Adapter 4” Blade Width 300 450 550 STOPS HRP10 HRP02 Cord and Handle HR220 Hot Rod™ Tool Only, 220 Volts (50 / 60 Hertz) KITHRK220** Hot Rod™ Kit, 220 Volts (50 / 60 Hertz) 250 Hot Rod™ Blade Adapter For Flat Blade and NWFW Hot Rod™ Replacement Cord and Handle HRP02 Hot Rod™ Cord and Handle GJA6G Adapter 6” Blade Width Hot Rod™ Blade Adapters 3 Convenient Sizes with Guides • Excellent for SIPs, ICF or EIFS • Great for In-Plant Production Applications Item # GJA3G GJA6G GJA10G HRP02 NWFW Description 4” Groove Jet™ Adapter 6” Groove Jet™ Adapter 10” Groove Jet™ Adapter Cord and Handle Flat Ni-Chrome Wire - per ft. GJA10G Adapter 10” Blade Width www.demandproducts.com • 1-800.325.7540 19 CONTROLLER Geo 8’ Foam Hot Wire Kit Free-Hand Cutting • Hot Wire Handles • Mag8 Controller • From 24” to 108” • 100 Foot Roll of Inconel Wire • Carrying Case Item # Description KITGFHWH IW100 Hot Wire Kit Inconel Chrome Wire, 100 ft. Price SIP Groover SIP Panel Groove Tool • Weighs Only 2 Lbs. • Long HD Cord • Heavy Commercial Construction • Adjustable Depth Guide Item # Description SIPG114 SIPG312 SIPG412 SIPG512 SIPG714 SIPG914 SIPG1114 CASE 11/4” SIP Groover Tool 31/2” SIP Groover Tool 41/2” SIP Groover Tool 51/2” SIP Groover Tool 71/4” SIP Groover Tool 91/4” SIP Groover Tool 111/4” SIP Groover Tool Sip Groover Case Please Note: Custom Sizes Available Price 139.00 149.00 159.00 169.00 179.00 189.00 199.00 50.00 Rope Cutter II Cuts and Fuses Nylon, Dacron, Polypropylene Line & Rope • Warms Up in 30 Seconds • 110-Volt • Free Standing or Table Mount Item # Description RCUT2 RCUTP01 Rope Cutter II 21/4” 21/4” Replacement Blades HDC 220 Power Converter • Step-Up and Step-Down Transformer • Converts 110V to 220V and 220V to 110V HDC220 20 Item # Description Price HDC220 220 Volt Converter 39.95 1,025.00 85.00 MAXX SOLDERING GUN HKTMX MAXX Soldering Gun 2 IN 1, MAXX 2 1/2” Foam Cutting Blade & Soldering Gun Hot Knife • 100 Watts of Power for Diverse Application • 110-Volt Transformer Power Supply • Ready to Use in 6 Seconds • Built-in Power Light Indicator • Storage Case Included for Convenience and Portability *Includes Soldering Gun, Tip, 2 1/2” Foam Cutter Blade, Cleaning Brush and Case HKTMX250 Item # Description HKTMX MXBT hktmx250 Maxx Soldering Gun Replacement Maxx Soldering Gun Tip * Maxx Soldering Kit 3 in 1 Soldering Gun, Fabric & Foam Cutter • Comes with 2 1/2” Foam Blade & Fabric Blade, Soldering Tip, Cleaning Brush & Case • 110 Volts • 100 Watts Item # Description HKTMXF3 3 in 1 Soldering Gun 2 in 1 Soldering Gun, Fabric & Foam Cutter HKTMXF3 • Case, Soldering Tip & Cleaning Brush & Fabric Blade • 110 Volts • 100 Watts Item # Description HKTMXFC 2 in 1 Soldering Gun/w Fabric Blade HKTMXFC Fabric Cloth Cutter Hot Knife The Fabric Cutter Hot Knife Cuts & Seals Sail, Canvas, Cloth and other Synthetic Fabrics • 130 Watts • Electronic Circuit Board Powered Cutter • Variable Heat Control • Post Mounted Fabric Cutter Blade • Spring-Loaded Safety Trigger Hot Knife Fabric Cutter Includes Tool, R Blade, Guide, Case & Cleaning Brush Item # Description HKTFC FCBR HDC220 Fabric Cutter Hot Knife, Blade, Guide Kit R Fabric Cutter Hot Knife Blade 220 Volt Power Converter HKTFC www.demandproducts.com • 1-800.325.7540 21 BOW CUTTERS Adjustable Leg Depth Control CI TOOL BowCutter 48™ 48” Free-Form Cutter w/ Depth Adjuster 48” KITBC48M • Can be Purchased With or Without our Magnum Power Supply • Uses NW100 Wire 18 ” BowCutter 24™ 24” Free-Form Cutter • Can be Purchased With or Without our Magnum Power Supply • Uses NW100 Wire 24” 24” KITBC24M BowCutter 12™ 12” Free-Form Cutter • Comes with Built-In Power Supply • Uses NW100 Wire 12” BC12C 12” BowCutter 12™ comes complete with power controller Item # Description BC48 MAGNUM KITBC48M BC24 KITBC24M BC12C NW100 NW500 Bow Cutter, 48”,Only Magnum Power Controller Bow Cutter, 48”, w/ Magnum Bow Cutter, 24”,Only Bow Cutter, 24”, w/ Magnum Bow Cutter, 12”, w/ Controller Ni-Chrome Wire, 100 ft. Ni-Chrome Wire, 500 ft. Price 278.00 563.00 795.00 244.00 750.00 517.00 55.00 220.00 Wall Skinner™ WS48 3” Shaves EPS High Spots • Eliminates EPS Dust • Reduces Rasping • Levels Walls to Perfection Item # WS48 MAGNUM KITWS48M NW100 NW500 KITWS48M MAGNUM 22 Description Wall Skinner™, 48” Only Magnum Controller Wall Skinner™, 48” w/ Magnum Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet Price 255.00 563.00 775.00 55.00 220.00 MAGNUM CONTROLLERS Light Gauge Wire Only Magnum™ Controllers & Wire NW100 4’, 8’, 10’ and 17’ • Uses Light Gauge Wire Only • Each Size is Designed to Heat the Appropriate Length of Wire Hot Enough to Cut EPS Foam Item # Description MAGNUM NW100 NW500 MAG8 IW100 IW500 Magnum Power Controller Ni-Chrome Wire, 100 feet (.02265) Ni-Chrome Wire, 500 feet (.02265) 8’ Magnum Power Controller Inconel Wire, 100 Foot Roll (.0126) Inconel Wire, 500 Foot Roll (.0126) NW500 Heats NW100 Wire 24” to 53” Hot Enough to Cut EPS foam. Price 563.00 55.00 220.00 835.00 85.00 340.00 MAGNUM IW100 IW500 Heats IW100 Wire 24” to 108” Hot Enough to Cut EPS foam. MAG10 (10’) and MAG17 (17’), Also Available - Please Call Hot Wire Kit 4’ & 8’ Kits Do-It-Yourself Kit • Includes: Magnum or Mag8, Gator Cord, 2 Insulators, Spring, and 100’ Roll of Wire • Everything You Need to Build Your Own 4’ or 8’ Hot Wire Machine • Magnum or Mag8 • Gator Cord • 2 Insulators • Spring • 100’ Roll of Wire KITHW MAG8 Item # Description KITHW KITHW8 ULP200 ULP400 ULP01 SCP00 2’- 4’ Hot Wire Kit 2’- 8’ Hot Wire Kit 4’ Wide Gator Cord Only 8’ Wide Gator Cord Only Insulator, each Spring, each Price 625.00 935.00 65.00 90.00 7.50 2.85 KITHW10 (10’) and KITHW17 (17’) Also Available - Please Call NI-CHROME WIRES Shaping Wire Ni-Chrome Wires APC Item # Description Price NWRW16 NWRW11 NWFW Round Ni-Chrome Wire, per foot (.0625) Round Ni-Chrome Wire, per foot (.125) Flat Ni-Chrome Wire, per foot 5.00 7.50 10.00 APC Controller Use with Shape Wire NWRW16 • Uses Heavy Gauge Wire Only • Heats 1-3’ of NWFW or NWRW11 or 16 Wire NWRW11 Item # Description Auxiliary Power Controller APC Price 16 Gauge, 1/16” (.0625) 11 Gauge, 1/8” (.125) NWFW 1,108.00 / ” x 1/32” 3 16 Hot Wire Handles Free-Hand Cutting Item # Description HWH MAGNUM NW100 KITHWH4 MAG8 IW100 KITHWH8 HWPHP1 Hot Wire Holders (Set of 2) 4’ Magnum Power Controller Ni-Chrome Wire, 100 ft. HWH & 4’ Magnum (comes w/ NW100 wire) 8’ Magnum Power Controller Inconel Chrome Wire, 100 ft HWH & 8’ Magnum (comes w/ IW100 wire) HWH Spring, each 10’ & 17’ Also Available - Please Call Built-In Gator Cord Price 153.00 563.00 55.00 715.00 835.00 85.00 985.00 6.00 • Plug End of Gator Cord Attaches to Either a Magnum or Mag8 Shown Actual Size • Tension Springs • Insulated • Plastic Handles • Can Be Used for Cutting Blocks of Geo Foam www.demandproducts.com • 1-800.325.7540 23 ARCH CUTTER Fully Adjustable. Both X and Y Axis APC 53” Adjustable Radius Arm Arch Cutter Stand Alone Precision Arch Cutting AT8AC Price 1,193.00 Price 1,108.00 1,193.00 2,185.00 1,108.00 2,185.00 Item # Description AT8AC Arch Cutter Only APC Controller KITARCH Arch Cutter with Controller 14” Uses the Same Controller as the Base & Cap Cutter. 110 Volts (Available in 220 Volts) Clamps Onto Most Flat Surfaces Adjustable Stops Base and Cap Cutter Accommodates Both NWFW and NWRW11 Wire Accommodates Both NWFW and NWRW11 Wire Fully Adjustable. Both X and Y Axis Stand Alone Multi-Purpose Base, Cap and Shape Cutting 24” Item # Description AT8BC Base & Cap Cutter APC Controller KITATBC Base & Cap Cutter with Controller Variable Speed HD Turntable 22” APC APC Controller 110 Volts (Available in 220 Volts) AT8BC Big Max 15™ Big Max 60™ 15 Gallon Rotor Stator Pump Sprayer 60 Gallon Rotor Stator Pump Sprayer • Comes with 50 Feet of Hose & Wand • Sprays Up to 150 Feet • Weighs Only 190 Pounds • 110 Volt Operation • Manual & Remote Operation • Variable 0-2 GPM • HD Steel Construction • Perfect for Spraying EIFS Finish Coat • Sprays Up to 200 Feet • Manual & Remote Operation • Weighs 675 Pounds • 13 HP Honda Engine • Variable 0-10 GPM • HD Steel Construction • Ideal for EIFS Base & Finish Coat and Hard Coat Stucco 24 Item # BMAX15 Description 15 Gallon Price Call Item # BMAX60 Description 60 Gallon Price Call TRI-MIXX TriMixx™ Commercial Duty, 3-Position Production Mixer • Designed for Mixing and Blending Industrial Coatings • Powered by Three 3/4 Horsepower Motors with a 5 to 1 Ratio Transmission • Emergency Stop Button for Each Motor • Carriage Can be Positioned at Any Height • 345 RPM, 110 Volts at 30 Amps • Safety Foot Switch • Comes Complete with Roller Conveyor • Quick-Disconnect Chucks • Counter Balance Carriage • Three M819 Mixing Paddles • Bucket Locking Mechanism • Super Heavy Duty Ball Bearing Motors • Heavy Duty Production Roller Conveyor Item # TMIXX Description TriMixx™ Mixer Price Call Note: Shaker and Tint Equipment quotes available upon request DeWalt™ DeWalt Electric Mixer DeWalt Specs: • 1⁄2” Spade Handle • 0-550 RPM • 7.5 Lbs • 9 Amps, 120 Volt Item # M7564 Aluminum Galvanized Steel Galvanized Bottom Safety Rings to Protect Bucket Interiors M819 Price 295.00 Mixing Paddles Professional Quality Mixing Paddles • Designed for Mixing and Blending Industrial Coatings • No Plastic Coatings to Flake Off In Material • Heavy Duty Construction • Made of Top Quality Materials Item # M822 M713 M819 M630 M636 M525 M630-30” M636-36” TWISTER M822 CYCLONE M713 Stainless Steel Description Electric Mixer Description Cyclone Mixer 6” x 231/2” (Galvanized) Paddle, 81/2” x 5” x 30” (Aluminum) Quick Mix, 81/2” x 5” x 36” (Steel) Twister Mixer, 71/2” x 30” (Stainless Steel) Twister Mixer, 71/2” x 36” (Stainless Steel) Speedy Mixer, 61/4” x 30” (Galvanized) Price 50.00 18.00 20.00 48.00 53.00 30.00 www.demandproducts.com • 1-800.325.7540 25 M525 ORIGINAL DURARASP CI TOOL y ted b roducts n e v In and P Dem DR614 DR814 Original DuraRasp™ 12-Grit Tungsten Carbide Rasp TC614 TC814 DR414 • Heavy Brazed #12 Tungsten Grit • Non-Gouging Rounded Corners • Custom Crafted and Serial Numbered • Lasts 100 Times Longer than Rasp Paper • Soft-Grip Handle Item # DR214 DR414 DR614 DR814 DR214 Description 2” x 14” 4” x 14” 6” x 14” 8” x 14” Tiger Claw DuraRasp™ TC414 For Rasping, Cutting, Shaving EPS Foam • Heavy Brazed #12 Tungsten Grit • Non-Gouging Rounded Corners • Custom Crafted and Serial Numbered • Lasts 100 Times Longer than Rasp Paper • Soft-Grip Handle All the Features of the DuraRasp™, Plus... 26 Item # TC414 TC614 TC814 Description The Tiger Claw™ 4” x 14” The Tiger Claw™ 6” x 14” The Tiger Claw™ 8” x 14” Rasping Cut-Off Saw Shaves High Spots TIGER CLAW The Industry Standard for Rasping EPS. Outlasts Rasp Paper Over 100 to1 Soft-Grip Handle with Finger-Flow Ribs for Comfortable Control Top Quality Steel Plate SM614 Smoothie™ DuraRasp™ 24-Grit Tungsten Carbide Rasp Item # • Ornamental Shapes & Base Coats SM614 • Custom Crafted & Serial Numbered Rounded Corners Description 6” x 14”Smoothie™ Registered Quality In ten months of testing by professional contractors, paper can’t begin to compare with the dramatic performance of the DuraRasp! 12-grit proved to be only marginally better than 16-grit, but still no comparison to the DuraRasp. Edger Rasp™ DuraRasp™ 2-Sided Tungsten Carbide Rasp • Heavy  #12 Tungsten Grit • Soft-Grip Handle Item # DE614 Description 6” x 14”Edger Rasp™ Foam Shaving Curry Comb A Demand Products Innovation • Reversible Smooth or Sharp Point Pattern • Grip-It Polypropylene Handle • Custom Crafted and Serial Numbered • Shank Pin Allows Comb to Reverse Easily on Handle • Finished Combs are Lacquer Dipped for Durable Finish Item # CC15S Perfect for Hard to Reach Areas Description Foam Shaving Curry Comb www.demandproducts.com • 1-800.325.7540 27 SHOP VAC Weighs Only 2.5 lbs DuraVac™ Rasp Specifications Dimensions:  7”W x 15”L Rasp Surface:  6” x 14” Hose Size : 11/2” Vacuum Hand Rasp • Lightweight • Removes EPS Dust Quickly • Weighs Just 2.5 Pounds • DuraRasp™ Plate Delivers Long Life •Constructed of Lightweight     Commercial Weight Aluminum • Connects to any Commercial Vacuum Item # KITDVH VRP614 Description Hand Vacuum DuraRasp™ Vacuum DuraRasp™ Replacement Plate, 6” x 14” Shop•Vac® Vacuum Back Pack BPVAC • Commercial 2 HP Two Stage Motor • Lightweight 93/4 Lbs • 7 Quart Tank Capacity • 5’ Locking Hose Plus Wands • 50 Foot Power Cord KITAE818 Air Fittings Not Included Requires 6 CFM @ 75 PSI Air Express™ Uses Adhesive Rasp Paper Note: Rasp Not Included Item # BPVAC BPVACP01 Description Shop•Vac® Back Pack Vacuum Replacement Bgs (pack of 5) 48” DuraRasp™ Tungsten Carbide Rasp • Custom Crafted • Heavy Epoxyed #12 Tungsten Grit • Lasts 100 Times Longer Than Rasp Paper Item # DR448 28 Description DuraRasp™ 48” Price 245.00 • Weighs 5.3 lbs. • Air Fittings Not Included • Requires 6 CFM @ 75 PSI Item # Description Price KITAE818 Air Express™ 325.00 Adhesive Rasp Paper Rasp Paper, 8” x 18” 12-Pack of ARP818 DR448 16-GRIT ARP818 KITARP818 12-GRIT ARP81812 KITARP81812 Price 225.00 85.00 RASP PAPER AS814 Rasping Tools Standard Hand Rasp • High Quality Aluminum Plates • 16 Grit Adhesive Paper Item # Description Price AS414 AS614 AS814 Aluminum Standard Rasp, 4” x 14” Aluminum Standard Rasp, 6” x 14” Aluminum Standard Rasp, 8” x 14” 21.00 24.00 28.00 CI TOOL AS414 AS614 Rasp Paper Adhesive Rasp Paper 12-Grit Rasp Paper Item # ARP41412 KITARP41412 ARP61412 KITARP61412 ARP81412 KITARP81412 ARP81812 KITARP81812 16-Grit Rasp Paper Desciption Rasp Paper, 4” x 14” Rasp Paper, 12 Pack, 4” x 14” Rasp Paper, 6” x 14” Rasp Paper, 12 Pack, 6” x 14” Rasp Paper, 8” x 14” Rasp Paper, 12 Pack, 8” x 14” Rasp Paper, 8” x 18” Rasp Paper, 12 Pack, 8” x 18” Price 3.40 36.00 5.04 55.00 6.80 80.50 8.69 88.00 Item # ARP414 KITARP414 ARP614 KITARP614 ARP814 KITARP814 ARP818 KITARP818 Description Rasp Paper, 4” x 14” Rasp Paper, 12 Pack, 4” x 14” Rasp Paper, 6” x 14” Rasp Paper, 12 Pack, 6” x 14” Rasp Paper, 8” x 14” Rasp Paper, 12 Pack, 8” x 14” Rasp Paper, 8” x 18” Rasp Paper, 12 Pack, 8” x 18” Bulk Rasp Paper Non-Adhesive Rasp Paper 16-Grit Rasp Paper Item # BRP250 BRP450 BRP650 BRP850 Description Bulk Rasp Paper, 2” x 50 yds Bulk Rasp Paper, 4” x 50 yds Bulk Rasp Paper, 6” x 50 yds Bulk Rasp Paper, 8” x 50 yds 12-Grit Rasp Paper BRP850 BRP650 BRP450 BRP250 Item # BRP25012 BRP45012 BRP65012 BRP85012 Description Bulk Rasp Paper, 2” x 50 yds Bulk Rasp Paper, 4” x 50 yds Bulk Rasp Paper, 6” x 50 yds Bulk Rasp Paper, 8” x 50 yds www.demandproducts.com • 1-800.325.7540 29 CLEANERS Finish-Up™ FU1 Gentle EIFS Cleaner Gentle • Cleans and Removes Stucco From Tools • Removes Stucco From Concrete, Brick, Glass & Wood • Does Not Damage Painted or Anodized Finishes KITFUS Item # Description FUS Finish-Up™ Spray, 14 oz. KITFUS Finish-Up™ Spray, per case of 12 FU1 Finish-Up™, 1 gallon FUS Price 9.50 108.36 51.00 Off-Base™ Powerful EIFS Cleaner Powerful • Removes Hardened Synthetic Stucco • Cleans and Removes Stucco From Tools • Removes Stucco From Concrete, Brick, Glass & Wood • Not for Use on Painted or Anodized Finishes Item # OBS OBS KITOBS OB1 KITOBS Description Off-Base™ Spray, 13 oz. Off-Base™ Spray, per case of 12 Off-Base™, 1 gallon Price 10.95 124.83 85.00 OB1 Wash Down 2™ Tar - Rid ™ EIFS Wall Cleaner • Safely Removes Algae & Red Mud • Great General Cleaner Item # WD1 Description Wash Down™, 1 gal. Price 35.00 A Word About Chemicals Removes Tar, Mastics, Grease and Oil Item # TR1 Description Tar-Rid™, 1 gal. Price 47.75 Efflorescence Remover Removes Efflorescence From Brick, Stone, Concrete & Block We suggest you follow the instructions carefully. • Contains Hydrochloric Acid • Etches Concrete, Removes We also recommend that you select a small inconspicuous area to test the chemicals and confirm the results for satisfaction before applying them to the job. Chemicals cannot be returned. ER1 Chemicals react differently on various materials. 30 Efflorescence Bleeding and Dissolves Scale & Corrosion Item # Description Price Efflorescence Remover 32.00 Chemicals are Prohibited on all International and Domestic Air Shipments ADHESIVES Foam-Lok™ Adhesive Foam-Lok™ Adhesive Self Contained Pressurized Systems EPS Anchor-In-a-Can • Adheres EPS to EPS • Fast Setup Time — 5 Minutes* • Spray Cans Material is Clear Colored • Does Not Degrade the EPS • Excellent for — Construction, Signs, • Solvent Based • Green Tinted • Coverage: Approx. 3,500 FLA30 Sq. Ft. per Container     Theater, Arts & Crafts, Packaging, Florists,     and 100’s more Item # FLAS KITFLAS • Does Not Degrade EPS Foam • Fast Setup Time Description Foam Lok™ Adhesive Spray 17.25 oz Foam Lok™ Adhesive, per case of 12 5 Minutes* Solvent Based Item # Description FLA30 30 Gallon Tank, Solvent Based Price 450.00 • Approx. Drying Time is 5-20 minutes* • Covers Approxmately 3,500 s.f. per container Shapes Tilt-Up Walls Theater Signs Chemicals are Prohibited on all International and Domestic Air Shipments FLGN Foam-Lok™ Adhesive Item # FLA5B Description Foam Lok™ Adhesive 5 Gal. Brushable Just Pour Into a Container and Brush On. Same Properties as Foam-Lok™ Spray. FLAH Item # Description FLGN FLAH Spray Gun Nozzel Spray Gun Air Hose *Foam-Lok™ will perform as intended– your results could differ if you do not follow the directions. Also atmospheric conditions, temperature, and thickness of application may vary the results. We suggest a trial test with each application to determine acceptable results. Blue Tinted Foam Glue • Bonds Most Types of Foam Together Including Styrofoam • Has Instant Grab But Still Allows Time for Repositioning • Bonds Paper, Fabric, Wood, Almost Anything to Foam • Water Based & Non-toxic • Non-flammable Item # BAHFG2 BACFG2 Description Hold The Foam, 2 oz. Craft Foam Glue, 2 oz. www.demandproducts.com • 1-800.325.7540 31 ENERFOAM Free FGUN2 *with the Purchase of a Case of EnerFoam 42 or EnerFoam 25 EnerFoam™ 42 Filler and Adhesive-In-One • Performs as a Foam Adhesive and a Filler • Bonds Quickly to Almost Anything • One Can is Equal to 40 Quart Tubes of Adhesive • Cures Initially in 10 Minutes • Polyurethane Based • 950 Lineal Feet at 1/2” Bead Adhesive EnerFoam™ 25 EnerFoam™ 24 • Same as Enerfoam™ 42 • No Gun Required. Straw • Cures Initially in 10 • Same as Enerfoam™ 42 • Polyurethane Based • 712 Lineal Feet at 1/2” • Cures Initially in 10 Filler & Adhesive-In-One Except Smaller Container Minutes WeatherProofing Bead • Controlled Dispensing ICF Construction Filler & Adhesive-In-One Dispenser Except Smaller Container Minutes • Polyurethane Based • 712 Lineal Feet at 1/2”Bead Item # Description ENER42 KITENER42 ENER25 KITENER25 ENER24 KITENER24 30 oz. EnerFoam Can 30 oz. EnerFoam Cans (cs of 12) w/Gun* 24 oz. EnerFoam Can 24 oz. EnerFoam Cans (cs of 12) w/Gun* 24 oz. Straw EnerFoam Can 24 oz. Cans (cs of 12) Price 19.99 235.00 15.99 189.00 15.99 189.00 Sealing EnerFoam™ 42 Junior Kit EnerFoam™ 42 Starter Kit EnerFoam™ 42 Master Kit • 6 Cans of 30 oz. Enerfoam™ 42 • 1 Dispensing Gun - FGUN2 • 1 Can of Enerfoam Cleaner • 2 Cans of 30 oz. Enerfoam™ 42 • 1 Dispensing Gun - FGUN2 • 1 Can of Enerfoam Cleaner • 12 Cans of 30 oz. Enerfoam™ 42 • 1 Dispensing Gun - FGUN2 • 2 Cans of Enerfoam Cleaner Item # ENER42JK Item # ENER42SK Item # ENER42MK Filler and Adhesive-In-One 32 Description 42 Junior Kit Filler and Adhesive-In-One Description 42 Starter Kit Filler and Adhesive-In-One Description 42 Master Kit FIREBLOCK Great Stuff® Pro Great Stuff® Pro • Bonds to Most Building Materials • Seals Gaps to 3” • Fireblock Sealant • Airtight Foam Water Resistant • Low Pressure Formulation • Controlled Dispensing • Performs as a Foam Adhesive • One Can is Equal to 16 Quart Tubes of Adhesive • Cures Initially in 10 Minutes • Reduces Squeaks • Polyurethane Based • 600 Lineal Feet at 1/2” Bead Gaps and Cracks Insulation Item # KITGSTUFF2 Description Case of 12 w/Gun Wall and Floor Adhesive Price 210.00 Item # GSTUFF3 KITGSTUFF3 *Free FGUN2 with the purchase of a case of Great Stuff Pro Handi-Foam® Fireblock Description Single 26.5 oz Can Case of 12 w/Gun Price 22.95 270.00 Handi-Foam Spray Foam Fire Block is the most economical, convenient and effective method for installing Building Code mandated Fireblocking in wood frame residential construction. Foam Sealant • Fills Gaps Around Pipes, Vents, Ducts and Fills Open Spaces • One 24 Oz. Can is Equal to 30 Quart Tubes of Caulk • T-Value of 4-5 Per Inch Cured • Orange Color-Coded Foam for Easy Jobsite Inspection • Passes ICC-ES Evaluation Item # HA24FB KITHA24FB Fireblock for Residential Construction • Woods and Solids Materials • UL Classified R-13919 (Flame Spread 25, Smoke Developed 50) • Meets ASTM E-*$ Class 1 Specs • Not For Use As A Firestop in Commercial Fire Rated Walls Description 24 oz. Fire Block Case of 12 w/Gun EnerFoam Cleaner Item # ENER10 KITENER10 Description 12 oz EnerFoam Cleaner 12 oz Cleaner (case of 12) Price 11.95 #FGUN2 135.00 Economy Gun Economy Gun Item # FGUN2 Description Economy Gun Mid-Range Gun Item # ENER14 Description Mid-Range Gun Free Price 32.95 FGUN2 Dispenser Gun #ENER14 Mid-Range Gun with Each Case of 12 Cans Price 80.00 www.demandproducts.com • 1-800.325.7540 33 RAINTEK Universal Kickout Flashing Eliminates FieldFabrication Errors • Saves Time & Money • Eliminates Field Fabrication Errors • Cures Galvanic Concerns • Flexible for Retrofits • Installs in Just Seconds • Handles all Temperature Extremes • Custom Molded Fabrication • Cuts Easily with Scissors • Contractor’s Choice since 1998 • 6” x 6” x 12” 4 Designer Colors: Classic Gray Cuts Easily with Scissors Flexible for Retrofits Item # UKOL UKOR UKOLW UKORW UKOLB UKORB UKOLT UKORT Colonial Woodland Desert White Brown Tan Description Gray Universal Kickout Left Gray Universal Kickout Right White Universal Kickout Left White Universal Kickout Right Brown Universal Kickout Left Brown Universal Kickout Right Tan Universal Kickout Left Tan Universal Kickout Right Price 8.95 8.95 8.95 8.95 8.95 8.95 8.95 8.95 WATERALLEY APPLICATION Super Caulker Fast and Efficient Water Alley 516™ Drainage Wall Mat WaterAlley 516 for EIFS • Geotextile Fabric Bond to One Side • 5/16” Core Water Alley 716™ • Positive Control • Hassle-Free Reload • Auto Flow Stop • Extra Long 10 1/2” Opening • Steel Welded Frame • Rotating Barrel Maintains Nozzel-toSurface Contact Angle • Twin Trust Plates • Rugged Aluminum Handle Drainage Wall Mat WaterAlley 716 for Stucco & Stone Veneer • Geotextile Fabric Bond to Two Sides • 7/16” Core and Code Compliant Weather Resistive Barrier Typical WaterAlley Application 34 Enlarged View of Water Alley Drainage Mat Item # CG100 Description Super Caulker Price 18.95 BACKER ROD Backer Rod Joint Sealer • Designed for Sealing EIFS Joints • Resistance to Moisture and Freeze-Cycle Problems • Conforms to Irregular Joints • Non-absorbing Closed Cell Skin • Dispenses Easily from Box to Joint Price Description Backer Rod Handy Pack, 1/4” x 2,500’ 121.00 Backer Rod Handy Pack, 3/8” x 1,400’ 85.00 60.00 Backer Rod Handy Pack, 1/2” x 800’ 50.00 Backer Rod Handy Pack, 5/8” x 550’ 52.00 Backer Rod Handy Pack, 7/8” x 330’ 92.00 Backer Rod Handy Pack, 1” x 550’ ⁄” 58 SR78 SR58 Convenient Handy-Pak Box ⁄8” 3 SR38 Sof Rod ™ for glazing. Sealant Sof Rod™ * Other Sizes Also Available - Please Call Glass Item # SR14 SR38 SR12 SR58 SR78 SR1 ⁄8” 7 Sealant Sof Rod™ Sof Rod ™in expansion joints and similar applications. Sealant Sof Rod™ Triangular Backer Rod Joint Sealer • Designed for Sealing EIFS Joints • Conforms to Irregular Joints • Non-absorbing Closed Cell Skin • Adhesive Surface Holds Material in Place • Resistance to Moisture and Freeze-Cycle Problems Item # TBR14 Description 1,800 Feet Roll TBR14 Price 327.90 Delmhorst™ Moisture Meter Digital Probe Tester • Reads Moisture Content from 6 - 40% • Averages Up to 50 Accumulated Readings • Audible Set Point Sounds When Preset Percentage is Reached • Comes with 31/4” Probes Item # BD2100 BD2P00 BD2P04 Description Digital Moisture Meter Standard Probe 31/4”, each Long Probes 6”, Pkg. of 4 DOW Caulk Contractors Weatherproofing Sealant One-part, moisture cure that provides durable, flexible, watertight joints & offers outstanding unprimed adhesion to non-porous substrates. CASE 0F 12 COLORS - WEATHERPROOFING SEALANT ANTIQUE white BLACK LIMESTONE SANDSTONE BRONZE GRAY WHITE Item # Description Item # Description CWSAW CWSBL CWSBRZ CWSGRY CWSL CWSSS CWSW Antique White Black Bronze Gray Limestone Sandstone White CWSAW-12 CWSBL-12 CWSBRZ-12 CWSGRY-12 CWSL-12 CWSSS-12 CWSW-12 Antique White Black Bronze Gray Limestone Sandstone White Backer Rod Installer Kit Installs Backer Rod Quickly • Comes with 4 Size Wheels for Level Surfaces • Comes with 4 Size Wheels for Unlevel Surfaces • Sets Perfect Depth Every Time • Spade Handle for Smoothing Sealant Item # QRT100 Description Quick Rod Installer Price 95.00 10 OZ Both tools come in this kit Uneven SurfaceTool Level Surface Tool QRT100 www.demandproducts.com • 1-800.325.7540 35 TAPES Red Stucco Tape Silver Duct Tape LMR2 60-Day Red Tape Duct Tape • Good for Porous Concrete and Rough Surfaces • Good General Utility Tape • UV Protectors Insure Long Exposure Life • Aggressive Adhesive Sticks to Almost All Surfaces • Leaves No Residue if Removed Within 60 Days Item # LMR2 KITLMR2 Description 2” x 60 yds. (per roll) 2” x 60 yds. (case of 24) DT307 Item # DT307 KITDT307 Price 7.25 170.00 Description 2” x 60 yds. (per roll) 2” x 60 yds. (case of 24) PROTECTIVE FILM Blue Window Film 90-Day Blue Protective Film • Protects Glass and Metal Window Frames • Leaves No Residue • Removes Easily Item # BT12 BT24 BT36 Description Blue Tac Tape, 12” x 600’ Blue Tac Tape, 24” x 600’ Blue Tac Tape, 36” x 600’ Price 60.00 90.00 120.00 BT12 BT24 BT36 Other Sizes Avalable Upon Request BARRIER WRAP Vortec™ Protective Barrier Wrap For Residential and Commercial Projects • Beats (or meets) Tyvek® On Every Test • 365 Day UV Exposure Rating • Non-Directional Drain Channels • Can Be Installed In Any Direction Item # V5200 Description Vortec Drainage Mat, 5’ x 200’ Non-directional dimple pattern means Vortec™ can be installed in any direction, reducing install time and vitrually eliminating product waste. 36 BARRIERS EIFS Window/Door Tape Secondary Weather Barrier Tape with Fiber Weave Back • Recommended for Use with a House Wrap • 30 Mil Thick Composite Membrane: 4” or 9” x 100’ per roll • Prevents Splash-Back • Self Adhesive • Should be Used Around Windows, Doors, or Any Structural Opening • Use Before Applying EIFS or Stucco Fiber Weave Item # Description KITETAP4 KITETAP9 4” Wide Window / Door Tape - Case of 12 9” Wide Window / Door Tape - Case of 4 Price 355.00 245.00 6” & 12” Also Available EIFS Tape EIFS Tape EPS or Substrate Base Coat House Wrap Wrap Before Window Install tape across the sill and jams. Overlap at least 2” horizontally and 6” vertically. Overlap house wrap. CI EIFS Tape House Wrap Wrap After Window After window installation, tape the top of the window, then fold house wrap over the tape and tape the flap at its outer edges. SECONDARY WEATHER BARRIER TOOL WaterBlock™ Weather Barrier Secondary Weather Barrier with Vinyl Backer BWBC6 Outside Corners Inside Corners • Flexible Flashing Membrane • 25 Mil Thick Composite Membrane • Use Around Windows, Doors, or Any Structural Opening • Tape Sheathing Joints • Self Sealing • Self Adhesive Item # Description KITBWB4 4” Wide WaterBlock Weather Barrier Case of 9* 6” Wide WaterBlock Weather Barrier Case of 6* 9” Wide WaterBlock Weather Barrier Case of 4* Corner Guard Flashing, each KITBWB6 KITBWB9 Corner Guard Window Flashings Door Flashings BWBCG Typical Corner Guard Installation Price * Each Roll Is 75 Feet Long Sheathing Splashback Area Deck to Wall Flashing www.demandproducts.com • 1-800.325.7540 37 187.00 187.00 187.00 3.95 DRAINAGE Starter Trac® Drip Edge Casing Bead Windows/Doors • Use at base of wall or around doors & windows •1 ¾” to 3” wide nailing flange available • ½” to 4” depth available • Splice Plates Included • Window or door drip edge • Sloped front edge sheds water • 2” wide nailing flange • 3/4” to 4” depth available Item # PCST1 Quantity 25 per box Description 1” x 10’ Item # PCSB15 Price Call WHITE Starter Trac® GRAY Continuous Vent • Use at base of wall • Base shelf has holes 3” on center • 3” wide nailing flange • ½” to 4” depth available • Face flange is 1 ¼” • Splice Plates Included • 2 5/8” to 4” vented area available • 14 sq. inches air flow per lineal foot • 3/8” to 1 ½” ground available • Splice Plates Included Item # Description PCSTDE1 1” x 10’ Item # PC548-1 Quantity Price 25 per box Call Description Soffit Vent Quantity Price 10 per Call Sill Screed Starter Trac® • Now available in three colors • ½” to 1 ¼” ground available • 2 ½” or 3 ½” nailing flange available • Use at base of wall • 3” wide nailing flange • ½” to 4” depth available • Splice Plates Included Item # PC632 Item # Description PCST1WP 1” x 10’ Colored Foundation Description 1” x 10’ WHITE Weep Holes Quantity Price 25 per box Call TAN GRAY Fixed-Flashing Style Low Profile Recessed Electrical Box • Clear Smoked Weatherproof Cover • Superb Moisture Control • One Piece Molded Design • Fixed Flashing for 1/2” EIFS & Stucco Systems • Disposable Mud Cover for Stucco and Painting • Complete with Duplex and GFI Plates CALL FOR PRICING ON ITEMS NOT SHOWN Wide Self Flashed Nailing Flange Description Clear, Fixed Flange In Box White, Fixed Flange In Box Free Mud Cover for Stucco & Painting Eliminates the need for separate flashing 38 TAN Price Call Soffit Vent with Drip Edge Item # PCDRIBOX PCDRIBOXW Quantity 60 per box Description 11/2” x 10’ Quantity Price 25 per box Call (VARIED SIZES AND LENGTHS) DOOR NG LI # 1 SE L ACCESS DOORS Universal Access Door • #1 selling door • Flush for all surfaces • Rounded corners – safe & aesthetic • Continuous, concealed hinge • Available in Steel or Stainless Steel Item # Description UF5000 Universal Access Door Recessed GFRG Door For Plaster & Drywall Recessed Stucco & Plaster Door • For plaster and drywall ceilings • Tapered edge for joint tape • Lightweight • Blends into surrounding finish • Door panel recessed 5/8” and lined with self-furring galvanized lath • Expansion casing bead with 3” wide galvanized lath, recessed 3/4” to receive plaster • Concealed, pivot hinge Item # Description GFRG Acoustical Tile Door Panel Item # *CALL FOR PRICING AND DIMENSIONS Description AP5010 Recessed Stucco Door Panel Fire Rated Fire Rated Fire Rated Wall Door Ceiling & Wall Door Plastic Access Door • Fire rated door for walls • 1 1/2 hr. U.L. “B” label • Concealed hinge • Available with galvanized steel drywall bead flange • Available in Steel or Stainless Steel • Standard with self latching bolt • Warnock Herfsey Int., 3 hr. rated for ceilings • Door panel is insulated and gasketed upswing • Coil spring to control closing of door panel • “L” handle - operable from inside • Flush for all surfaces • High impact styrene plastic with U.V. stabilizers • Hinged door panel with removable feature • High Quality at economic pricing Item # Description Item # Description Item # Description FB5060 Fire Rated Access Door FW5050 Ceiling Access Door PA3000 Plastic Access Door STUCCO SPLATTER & GUN Splatter Stucco Machine 2 Quart Capacity Stucco Spray Hopper Gun 4 hole model • Used to Apply Color Coat, Acoustic and Drywall Mud • Lighweight and Durable • Can Match Most Surfaces • 2 Quart Capacity • Hopper Made from Stainless Steel Material • Lifetime Anti-rust Guarantee • Slide Out 4 Hole Spray Tip Plate • 4 Removable Stainless Steel Air Jet Nozzles • Swivel Between Handle and Hopper Item # SSM2 Air compressor information: We recommend to use 12 cfm @ 100 psi gas power air compressor or electric with 30 gallons or larger air tank. Description Stucco Machine Price 69.95 Item # HG5 Hopper Gun 2 Gallon Capacity HG1 Sprays: Mill Mixes, Acoustics, Drywall Mud, Glitter, Waterproofing, EIFS and More. Item # HG1 KITLMT468 Requires minimum of 2.4 CFM @ 90 PSI Description Superior Hopper Gun w/ 3 Tip, 2 gal. 4,6,8 mm Spray Tips & Brass Collar Description Stucco Hopper Spray Gun www.demandproducts.com • 1-800.325.7540 39 TROWELS Golden Stainless Steel Trowel by Marshalltown™ • Wood Camel Handle • Golden Stainless Steel Item # Description 43/4” x 11” 5” x 12” 5” x 13” 5” x 14” 5” x 16” T511M T512M T513M T514M T516M Permashape Golden Stainless Trowel Price 37.50 38.95 40.25 42.95 46.25 Hand-Made Inox Venetian Plastering Trowel by Marshalltown™ Item # VPT49 Item # Description 43/4” x 11” 5” x 12” 5” x 13” • Dura-Soft Handle 5” x 14” • Golden Stainless Steel 5” x 16” T511DS T512DS T513DS T514DS T516DS • Soft Handle • Rounded Corners Description 3.9” x 9.5” • INOX Stainless Steel Other Sizes Available Venetian Plastering Trowel Stainless Pool Trowel by Marshalltown™ Item # TP516 Item # VPT37 Description 41/2” x 16” Pocket Trowel • 6 Blades in 1 • Unique Locking Mechanism to Anchor the Blades Together • Easy Access for Blade Selection • Easy to Clean Stainless Steel Blades • Versatile Enough to Reach the Hardest Places 40 Item # Description PT6 Pocket Trowel Description 3” x 8” • Soft Handle • Rounded Corners • Stainless Steel DARBIES & TROWELS Notched Stainless Steel Trowels Notched Trowels Item # TRNT2 Description Price Rounded, 1/4” x 1/4” x 11/2” 25.50 Item # Description Price Rounded, 3/8” x 1/2” x 11/2” 25.50 TRNT3 Item # Description Rounded, 1/2” x 1/2” x 2” TRNT4 Item # • Dura-Soft™ Handle • Accurately Notched to EIFS Manufacturers’ Specifications • 7 Shapes to Choose From • Highest Quality Stainless Steel Price 25.50 Description Price Rounded, 3/16” x 3/8” x 13/4” 25.50 TRNT5 Item # TRNT9 Description Rounded, 5/8” x 5/8” x 1” TRNT9 Item # Description Rounded, 5/16” x 5/16” x 3/4” TRNT10 Item # TRNT11* Description Square, 3/8” x 3/8” x 3/8” TRNT2 Rounded, 1⁄4” x 1⁄4” x 11⁄2” TRNT3 Rounded, 3⁄8” x 1⁄2” x 11⁄2” TRNT4 Rounded, 1⁄2” x 1⁄2” x 2” TRNT5 Rounded, 3⁄16” x 3⁄8” x 13⁄4” TRNT9 Rounded, 5⁄8” x 5⁄8” x 1” TRNT10 Rounded, 5⁄16” x 5⁄16” x 3⁄4” TRNT11* Square, 3⁄8” x 3⁄8” x 3⁄8” Dimensions are: Width x Depth x Spread. *Carbon Steel Stub Nails & Hammer Stucco Stub Nails & Magnetic Hammer • 3/8”,1/2” Stub Nails for Stucco Lath • Hammer has — Steel Shank, Rubber Handle MAGHAM and Magnetic Tip MAGHAMPO1 Rub Brick Great for Hardened Stucco Item # RB631 Description Rub Brick 6” x 3” x 1” Price 13.95 “h” Darbies Smoothly Levels Hard Coat Over Long, Straight Areas Item # MD4 MD6 MD8 Description 4’ Magnesium Darby 6’ Magnesium Darby 8’ Magnesium Darby Item # MAGHAM SN38 SN12 MAGHAMP01 Description Magnetic Stub Nail Hammer 3/8” Stub Nails (50 LB. Box) 1/2” Stub Nails (50 LB. Box) 6” Magnetic Hammer Tip 4 1/2ʺ “h” Darbie www.demandproducts.com • 1-800.325.7540 41 Price 50.00 310.00 350.00 19.95 FLOATS Private Label Program Special Chemical-Resistant Labels that Outlast Printed/Stamped Versions. 24 Available Colors. F600 ABS Float • 5” x 11” • ABS Plate • Solid-Grip Comfort 1” x 3” Laminated Label Call for More Details Textured Handle Item # F600 Minimum Order of 120 Mix & Match Any on Pages 42 & 43 Description ABS Float F400 Rounded Edge Float F900 European Float Item # Description Rounded Edge F900 Item # Description Price European Float 8.50 F400 • America’s Favorite • Tapered Coned Handle • Rounded Corners • 5” x 11” • 51/2” x 11” • ABS Plate F400R NKI Float Item # F400R Description NKI Float F650 NKI Float Item # F650 Description NKI PVC SOFT GRIP • 51/2” x 11” • ABS Plate • 21/2” x 11” • PVC Plastic Plate 42 • PVC Plate • 51/2” x 11” F850 Italian Finish Float F800 Italian Finish Float Item # Description F850 Italian Float F800 Item # Description Italian Float • 5” x 11” • PVC Plastic Plate FLOATS Stucco Sponge Float 3/4” & 1” Thickness • Ideal for Bringing Aggregate to the Surface • The Most Popular for All Stucco Applications • 12” x 5” with Wood Handle Floats: Item # Description 3/4” Fine Pad 1” Fine Pad 1” Course Pad F125 F130 F135 Price 5.95 5.95 5.95 Replacement Pads 6 Pack: Item # GPAD6 GPAD61 GPAD6C Description Pad 6 Pack Pad 6 Pack Pad 6 Pack Price 12.95 12.95 12.95 F150 White Sponge Float 1” Soft Texture • Retains Water and Provides a Smoother Finish • 12” x 5” with Wood Handle Item # F150 WPAD6 Description White Sponge Float Replacement Pads 6 Pack Price 5.95 12.95 F250 Texture Float Texture Pattern Face • 51/2” x 11” Item # F250 Description Texture Float Price 5.75 F500 Rib Float FT511 Composite Float/Trowel by Marshalltown • Comfortable Contour Wood Handle • Composite Plate • 5” x 11” Item # FT511 Description Float / Trowel Stiffer Than Normal • 51/2” x 113/4” • Ribs Make Plate a Little Stiffer Than Normal Item # F500 Description Rib Float Price 21.00 Riveted Plate www.demandproducts.com • 1-800.325.7540 43 EDGERS T613 T612 T611 T610 T609 Stainless Outside Corner Edgers 5 Sizes of Detailed Corner Edgers • Leaves a Professional Clean Edge Item # T609 T610 T611 T612 T613 KITOCE Description 1/2” Stainless OUTSIDE Corner Edge 3/4” Stainless OUTSIDE Corner Edge 1” Stainless OUTSIDE Corner Edge 1 1/2” Stainless OUTSIDE Corner Edge 2” Stainless OUTSIDE Corner Edge OUTSIDE Corner Edger Kit (All 5) Stainless Inside Corner Edgers 5 Sizes of Detailed Corner Edgers • Leaves a Professional Clean Corner T603 T602 T601 T600 T599 Item # T599 T600 T601 T602 T603 KITICE Description 1/2” Stainless INSIDE Corner Edge 3/4” Stainless INSIDE Corner Edge 1” Stainless INSIDE Corner Edge 1 1/2” Stainless INSIDE Corner Edge 2” Stainless INSIDE Corner Edge INSIDE Corner Edger Kit (All 5) Price 10.50 10.50 10.50 10.50 10.50 49.85 STUCCO RAKES-SCRATCH EFFECT Plastic Handle Comfortable Sculpted Handle Soft-Grip Handle SRAKESG 44 SRAKE Stucco Scratch-Coat Rakes Your Choice of Two Handles • High Quality Tension Steel Item # SRAKE SRAKESG Description Stucco Rake - Sculpted Handle Stucco Rake - Soft-Grip Handle Price 14.85 14.85 TROWELS T515 T520 T530 T535 Margin Trowels Wood Handles Item # T515 T520 T530 T535 KITMT Description Margin Trowel, 11/2” x 5” Margin Trowel, 2” x 5” Margin Trowel, 2” x 6” Margin Trowel, 2” x 8” All 4 Sizes in Kit Price 10.00 10.50 11.00 13.00 42.00 Stainless Margin Trowels 3 Sizes • Clean Sharp Edges • Stainless Steel Construction Item # Description Stainless Steel MarginTrowel, 11/2” x 35/8” Stainless Steel Margin Trowel, 2” x 4” Stainless Steel Margin Trowel, 11/2” x 7” All 3 Sizes in Kit TS1 TS2 TS3 KITTS TS1 TS2 TS3 Stainless Detail Trowels 2 Sizes — Pointed & Rounded • The Perfect Pair to Buy • Stainless Steel Construction Item # Description Price TPD1 Stainless Pointed Detail Trowel 6.75 TRD2 Stainless Rounded Detail Trowel 6.75 TPD1 TRD2 www.demandproducts.com • 1-800.325.7540 45 SCOOPS Baltic Scoop Scoop Trowel Tool • Eliminates the Hawk • Scoops an Even Trowel Full Every Time • Bucket Hanging Clip for Easy Storage • Galvanized Steel Construction Item # TBSH7 Description Baltic Scoop Price 16.75 Super Scooper EIFS  Contractors Most Requested Scoop • Unique Design Scoops the Bucket Clean • One Scoop Full Fills Your Hawk Perfectly • Break Resistant Aluminum Construction • Long Handle Saves Your Back Item # BS10 Description Super Scoop Price 22.25 The Scoop Bucket Trowel Plastic Scoop • One Scoop Fills Your Hawk • Easy to Clean Item # SCOOP Description The Scoop Price 8.75 Bucket Dredger Plastic Dredger Scoop • One Scoop Fills Your Hawk • Easy to Clean Item # BDRE 46 Description The Scoop Price 8.75 European Standard • High Quality Stainless Tapered Scoop • Goose Neck Handle Design Stores Easily on the Rim • Flat Surface Wipes Clean Item # T700 Description Bucket Trowel Price 14.00 HAWKS Hawks Wood or Soft Grip Handle Aluminum with Wood or Soft Grip Handle Item # TAH8S TAH8 TAH132S TAH13 TAH132 TAH14 Description Aluminum Hawk, 8” x 8” ALUMINUM: SOFT HANDLE Aluminum Hawk, 8” x 8” ALUMINUM: WOOD HANDLE Aluminum Hawk, 131/2” x 131/2” ALUMINUM: SOFT HANDLE Aluminum Hawk, 13” x 13” ALUMINUM: WOOD HANDLE Aluminum Hawk, 131/2” x 131/2” ALUMINUM: WOOD HANDLE Aluminum Hawk, 14” x 14” ALUMINUM: WOOD HANDLE Magnesium with Wood or Soft Grip Handle Item # Price 28.00 TMH13S 18.50 TMH14S 20.75 TMH13 26.25 TMH14 Description Magnesium Hawk, 13” x 13” MAGNESIUM: SOFT HANDLE Magnesium Hawk, 14” x 14” MAGNESIUM: SOFT HANDLE Magnesium Hawk, 13” x 13” MAGNESIUM: WOOD HANDLE Magnesium Hawk, 14” x 14” MAGNESIUM: WOOD HANDLE SOFT GRIP HANDLE Price 44.00 49.00 45.50 50.95 WOOD HANDLE Composite Hawk Unique New Design Especially for EIFS Control Fibers  Prevent Stucco Cracks • Designed Especially for EIFS • Won’t Warp or React to Caustic Materials • DuraSoft™ Handle • Sponge Collar to Prevent Calluses • Made of a Unique Composite Material • 12” x 12” Platform • Great for EIFS and Hardcoat Stucco Item # CF1 KITCF1 CF50 Description Control Fiber Pkg. 3.5 oz. Control Fiber Case (150 Pkgs.) Control Fiber 50 lb Bulk Box Item # TCH12 Additional quantities available upon request. B302 Description Composite Hawk B403 Brushes Quality Brush Products Item # TB TBR B302 B403 TB TBR Description Acid Brush with 8” Handle Tampico Brush with 20” Handle 6” Tampico Bucket Brush (Plastic) 6” Tampico Bucket Brush (Wood) www.demandproducts.com • 1-800.325.7540 47 KNIVES & BLADES LC1 SOFT GRIPS DC560 Soft Grip Knives Professional Quality 3/4” or 1” Blades Item # LC34 LC1 DC560 LC34 Description 3/4” Soft Grip 1” Soft Grip 3/4”Razar Black Tajima Knives TM Economy Breakaways • Available in 3/4” & 1” • Great Quality for Demanding Craftsman • Comfortable Colorful Handles Item # T2 T10 D10 48 D20 T50 LCB50-RB T2 T10 T50 D1 D10 D20 LCB30 LC303 LC303-D60 LCB50-RB LCB50-RB50 D1 LC303 LCB30 Description Heavy-Duty Knife, 3/4” 10-Pack Blades, fits T2, L2 & LC34 50-Pack Blades, fits T2, L2 & LC34 Xtra-Heavy-Duty Knife, 1” 10-Pack Blades, fits D1, H1 & LC1 20-Pack Blades, fits D1, H1 & LC1 10-Pack Blades, fits LC303 3/8” Precision Blade 3 Color 60 Pack Razar Blk. Blades 10 pk. fits DC560 Razar Blk. Blades 50 pk. fits DC560 LC303-D60 KNIVES & BLADES Olfa Knives TM Breakaways • Best Breakaway Knives You Can Buy! • 2 Sizes: 3/4” & 1” • Distinctive Color Aids Visibility Item # L2 L5 LB H1 HP HB Description Olfa™ 3/4” Heavy Duty Knife Olfa™ 5-Pack Blades, fits L2 & L2HS Olfa™ 50-Pack Blades, fits L2 & L2HS Olfa™ 1” Xtra-Heavy-Duty Knife Olfa™ 5-Pack Blades, fits H1 & H1HS Olfa™ 20-Pack Blades, fits H1 & H1HS Price 9.45 5.99 28.49 16.99 7.49 26.49 L2 SOFT GRIPS L5 LB H1 HP HB L2HS H1HS Soft Grip Knives Professional Quality 3/4” or 1” Blades Item # L2HS H1HS Description 3/4” Soft Grip 1” Soft Grip Price 9.99 18.99 Insul-Knife Multi-Purpose Foam Insulation Cutter • Cut Foam Insulation Board with Precision and No Mess • Cut Fiberglass Insulation with Ease • Trim Expanded Foam Insulation Around Windows and Doors • Cut Pipe Insulation, Sponge Foam and Much More Item # INSULKNIFE Description Insul-Knife www.demandproducts.com • 1-800.325.7540 49 MESH MATES Mesh Mates 3™ Mesh Mate Jr Portable Job Site Mesh Cutters • Accepts All Meshes Up to 48” Wide • Portable Enough for Scaffolding • Measure Meter Exact to the Inch • All Cuts are Square Mesh Mate 3 • Cuts Both Vertically and Horizontally • Comes with 2 Cutting Arms • Can Accommodate Multiple Cutting Arms e3 Mesh Mat ™ Item # KITMMJR3 KITMM3 MMTC MMB MMTCA Description Mesh Mate Jr 3™ Only Mesh Mate 3™ w / Top Cutter Assembly Mesh Mate 3™ Top Cutter Arm Only Mesh Mate 3™ 5-Blade Pack Mesh Mate 3™ Top Cutter Assembly LEVERAGE PRY TOOLS Medium Duty Leverage Pry Lifter Tool Medium Duty • Lifts Lids Easily with Leverage • Coated Metal with Plastic Coated Handle • 11” Long Item # Remove Lid Without Damage LLB Leverage Pry Bar Tool Heavy Duty 50 Convenient Size Item # Description 16” Long Price 19.95 Light Duty Plastic Lid Lifter 8 1/2” Long • Cuts, Seals, Lifts • 16” Long LLH Description 11” Long Price 16.50 Item # Description LL 81/2” Long Price 3.50 Price 520.00 649.00 50.00 5.00 160.00 TOOL KITS NEW PRODUCT Save $ 12 25 KITHS KITPVNT Decorative Tool Kit •18 pc Tool Kit for Venetian Plaster, Marmoino, lime and Other Decorative Finishes • Aluminum Case with Two Dividers • Special Steel Welded Tools with Wooden or Sintesi Rubber Handles and Two B-Wires Includes: 3 Finishing Trowels, 2 Plastering Trowels, 4 Venetian Plaster Spatula Set, 2 Putty Knives, 1 Filling Scraper, 1 Tempered Steel Scraper, 2 Ultra-Flexible Scrapers, 2 Filling Trowels Item # Description KITPVNT Decorative Tool Kit Head Start Pro Kit Includes Economy Canvas Bag, HD Lid Lifter; 13” Aluminum Hawk, Bucket Trowel, 5” x 13” Marshalltown Trowel, 11/2” x 5”, 2” x 5” and 2” x 6” Margin Trowels, 1” & 2” Inside Corner Edgers, 1” & 2” Outside Corner Edgers, Quality Pro Float, Off-Base Spray, Aluminum Standard Rasp, Foam-Lok Adhesive, 6” Cleaning Brush, 2” Long Mask Red Tape, HD Knife and 10-Pack of Blades. Item # Description Price KITHS Head Start Pro Kit 239.58 Save CUSTOMIZED KITS AVAILABLE 2325 $ KITICF2 We Can Custom Assemble a Kit For you HD Canvas Bag ICF Kit Includes Commercial Duty Hot Knife™, 450 Blade, 4” Hot Knife Adapter, 2’ NWFW Flat Wire, Cable Slot Cutter (3-Pak), Single Electrical Box Cutter (3-Pak), Double Slot Cutter (3-Pak), HD Canvas Bag, 3/4” Cutting Knife. Item # Description Price 442.00 KITICF2 IFC Kit Hinged Metal Frame Top, Leather Straps & Handle. 24” Wide x 12” Deep. Item # CB24 Description HD Quality Canvas Bag 12” Deep Price 50.00 CB24 www.demandproducts.com • 1-800.325.7540 51 SIDEWINDER SideWinder™ Ornamental 4’ Shape Cutter • Cuts Compound Miters, Angle Straight Cuts, Columns, and Decorative Moldings • Uses Your Hardboard Template Patterns to Trace Shapes • Variable Heat Control — Heats Up Extremely Fast • 110 Volts. Also Available in 220 Volts • 2’ x 4’ Block Table Capacity • 33” X 62” Wide Table Size • Weighs Just 125 Pounds • Cuts 48” Wide EPS TOOL • Lease To Buy Available KITSWM CI Item # KITSW MAGNUM KITSWM NW100 NW500 Description SideWinder™ Only Magnum Power Controller SideWinder™ w/ Magnum Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet Price 2,052.00 563.00 2,525.00 55.00 220.00 Pattern Template Guide How-To Pattern Guide with Easy-To-Follow Illustrations Includes 63 Profiles PTG Standard Version Digital Version Booklet Only Booklet & CD PTGD SideWinder 8™ Ornamental 8’ Shape Cutter • Motorized Pattern Follower • Industrial Quality • Single Wire Cutter • Cuts Compound Miters, Angle Straight Cuts, Columns, and Decorative Moldings • Uses Your Hardboard Template Patterns to Trace Shapes • Variable Heat Control — Heats Up Extremely Fast • 110 Volts. Also Available in 220 Volts • 2’ x 8’ Block Table Capacity • 48” X 96” Wide Table Size • Weighs Just 350 Pounds • Folding Legs • Price Includes Controller and Motorized Follower • Lease To Buy Available SW8 Motorized Pattern Follower 52 Item # SW8 MAG8 IW100 IW500 Description Price SideWinder 8 w/ Controller 5,619.00 835.00 Mag 8 Power Controller 85.00 Inconnel Wire, 100 feet 340.00 Inconnel Wire, 500 feet ™ STYROSMITH StyroSmith™ 2-in-1 Hot Wire Foam Cutter and Ornamental Shaper SideWinder™ & StyroCut™ KITSSM • Ornamental Shapes • Vertical & Horizontal Straight Cuts • Channels, Angles, Tapers, Compound Miters, Straight Cuts, Columns, Decorative Moldings, etc. • 110 Volt • 24” Block Table Capacity • Auxillary Table • Weight 225 Pounds • Lease To Buy Available Item # KITSS MAGNUM KITSSM NW100 NW500 Description StyroSmith™ Only Magnum Power Controller StyroSmith™ w/ Magnum Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet Price 4,342.00 563.00 4,800.00 55.00 220.00 StyroCut™ Our Best Machine! • Use In-Plant or On Job Sites • Foot Pedal Control • Designed by Engineers to Cut Straight, Channel, Angles and Tapers • Portable — Weighs Only 117 Pounds • Capable of Vertical and Horizontal Cuts • Table Tilts and Locks 0°- 45° • Cuts 15” Deep by 4’ Wide • 60” Wide Cutting Table by 27” Deep Item # Description KITSC MAGNUM KITSCM NW100 NW500 StyroCut™ Only Magnum Power Controller StyroCut™ w/ Magnum Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet KITSCM www.demandproducts.com • 1-800.325.7540 53 QUICKSILVER Quick Silver 12/48™ & Quick Silver 12/96™ Our Most Versatile Portable Machine • Portable — Weighs Only 60 Pounds • Sets Up and Folds Down in Seconds • Cuts 12” at 90° and Harp Swings 180° for Angle Cuts • Cuts Tapers and Cones • Water Resistant Polypropylene Top • 110 Volts. Also Available in 220 Volts • Built-in 24” Table Extension • Cutting Width 48” or 96” Harp Swings 180° for Special Cuts KITQSM Compact! Item # Description QS1248 MAGNUM KITQSM NW100 NW500 QS8 IW100 IW500 Quick Silver™ 12/48 Magnum Power Controller QS1248 w/ Magnum Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet Quick Silver™ 8’ w/ Controller Inconel Wire, 100 feet Inconel Wire, 500 feet Price Light Gauge Wire Only IW100 NW100 NW500 Heats NW100 Wire 24” to 53” Hot Enough to Cut EPS foam. IW500 Heats NW100 Wire 24” to 108” Hot Enough to Cut EPS foam. Verti-Cutt™ Hot Wire Foam Cutter • Portable — Weighs Only 60 Pounds • Sets Up and Folds Down in Seconds • For Vertical and Diagonal Cuts • Cuts Corners and Cylinders • Moisture Resistant Bakelite Table Top • Built In Transformer Mounts Under Table • Continuously Adjustable Temperature • Heats Wire in 10-15 Seconds VC20 Item # Description VC20 NW100 NW500 Verti-Cutt™ Only Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet Foot Pedal 54 2,114.00 563.00 2,550.00 55.00 220.00 4,858.00 85.00 340.00 Built In Transformer Diagonal Cuts Bevel Cuts BLOCK BUDDY Remove Top Brace Add Harp at Top Uprights Facing the Back of the StyroCut 15 Add Auxiliary Table StyroCut 15 StyroSmith Block Buddy™ Cornice Cutter CI 18” TOOL • Shaves, Cuts and Miters • Miters from 0 to 45º • Cuts 18” Deep Block • Weighs Only 35 Pounds • Legs Fold for Easy Storage • 24” Depth Cuts at 90º • 16” Depth cuts at 45º • Great for ICF Item # Description BB MAGNUM KITBBM NW100 NW500 Block Buddy™ Only Magnum Power Controller Block Buddy™ w/ Magnum Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet 24” Depth Cut at 90° 16” Depth Cut at 45° Price 1.142.00 563.00 1,600.00 55.00 220.00 KITBBM JobCut™ Designed for Jobsite Performance • Portable - Weighs Only 45 Pounds • Sets Up and Folds Down in Seconds • Cuts 12” at 90° • Harp Tilts - Not the Table! • Cuts from 1° to 90° • Requires Two 2’ x 8’s • 110 Volts. Also Available in 220 Volts • Cutting Width 48” • Folds Quickly to only 5” for Easy Storage Item # JOBCUT MAGNUM KITJCM NW100 NW500 Description JobCut™ Only Magnum Power Controller JobCut™ w/ Magnum Ni-Chrome Wire, 100 feet Ni-Chrome Wire, 500 feet KITJCM Price 1,375.00 563.00 1,895.00 55.00 220.00 Does Not Include Saw Horses or Wood Folds Quickly to only 5” Harp Moves–Not the Table www.demandproducts.com • 1-800.325.7540 55 TW848I Top Selling MegaPlot Model C848 CNC Foam Cutter Single Wire 8’ with TurnTable • Cuts Up to 8’ Wide by 4’ High • Industrial Quality • Heavy Duty Extruded Aluminum Construction • Independent Heavy Duty Stepper Motors • Ball Bearing Drive Track Systems • Built-in TurnTable • Accepts Vector Art .plt or CAD .dxf Files • Operates on 110 Volts TW848 Independent Axis CNC Foam Cutter Single Wire 8’ with Lathe & TurnTable • Will Cut Tapered Fluted Columns • Cuts Up to 8’ Wide by 4’ High • Comes Complete with Lathe and TurnTable • Industrial Quality • Heavy Duty Extruded Aluminum Construction • Automatic Wire Tensioner • 6 Independent Heavy Duty Stepper Motors • Ball Bearing Drive Track Systems • Accepts Vector Art .plt or CAD .dxf Files • Operates on 110 Volts TKTW848I Call For Turnkey Pricing* Turnkey Pricing Includes • Machine • TurnTable • FoamShaper™ Software • Controller-Remote Control • CorelDraw® Software 56 • 19” LCD Flat Screen Monitor • Windows® Software • Shipping in Continental U.S. • Installation & Training • PC Computer • Options Avaliable TKC848 Call For Turnkey Pricing• Demo CD Available Featuring MP Remote Functions warranty Ask About Our Monthly Specials Columns • Pipe Insulation • Sign Letters • Graphics Store Props & Displays • Logos • Amusement Park Props Architectural Scale Models • Easy Coat Coatings MW848 CNC Foam Cutter 10-Wire 8’ with TurnTable Easy Coat Silver • Can Cut Using 1-10 Wires • Cuts Up to 8’ Wide by 4’ High • Comes Complete with Lathe and TurnTable • Industrial Quality • Heavy Duty Extruded Aluminum Construction • Independent Heavy Duty Stepper Motors • Ball Bearing Drive Track Systems • Accepts Vector Art .plt or CAD .dxf Files • Operates on 220 Volts, Single Phase Automatic Foam Coater With or Without Fiber Mesh • Footprint: 57” x 62” of Floor Space • HD Stainless Steel and Aluminum Construction • Profiles from 2” to 36” Wide and 18” High • Sprocket Feed Depth Controls • 110 or 220 Volts • One Year Warranty ECOATER Automatic Feed System Call For Turnkey Pricing* Stand Not Included TKMW848 Call For Turnkey Pricing* Arch/Base Cutter Combo Easy Coat Coating Stand Alone Precision Arch Cutting • Cuts Compound Curves and Negative for Precast Concrete • Minimum Arch Internal Radius of 5” & External Radius of 10” Maximum Cutting Sizes Base/Caps Arches 30” Especially Designed For Shape Coating 50-60sq. ft. @ 1/4” Description EC50G Easy-Coat, 50 lb Bag Full Truck Load: 16 Pallets (896 Bags) 1/2 Truck Load: 8 Pallets (448 Bags) 1/4 Truck Load: 4 Pallets (224 Bags) 2 Pallets (112 Bags) 10” 20” 43” CC70 Item # CC70 Description Combo Cutter www.demandproducts.com • 1-800.325.7540 57 TM FD35 Foam Densifier FB285 & FB585 Foam Densifier Grinder, Storage Hopper & Densifier in one! 1200 lbs* Loose Foam per Hr. TURN YOUR WASTE INTO A PROFITABLE REVENUE STREAM FD12 Foam Densifier FD15 & FD25 Foam Densifier * Figures are approximate depending on foam type, density and rate of feed Waste is Reduced by Grinding and Then Melting Foam Into a Recyclable Patty That is Reduced Up To 90% In Volume • Greatly Reduces Foam Volume for Recycling • Densifies Three Types of Foam — Polystyrene, Polyethylene and Polypropylene • Produces Revenue by Creating a Marketable Product for Recycling 58 • Up To 90% Reduction of Foam Waste Size • Heavy Duty Motors with Solid Steel Construction • Densifiers Have Passed Rigourous Air Quality and Health Environment Safety Tests • One Year Warranty with a Loaner Program Available if Your Machine is Out of Service ReCyk™ EPS Foam Grinder • Gravity Fed into 18” x 18” Hot Wire Grid • 3/4” Grid Openings Cut Foam • Manually Move Foam Sideways While Feeding Foam Into ReCyk™ or Recycle Twice to Get 3/4” Cubes • Machine Measures: 25” x 25” x 5’ • Weighs 125 Pounds • Portable: Moves Around Easily • Standard 110 Volt • Manual Feed Opening of 18.3” x 13.2” • Volume Reduction Ratio: Up To 3:1 • Gravity Feed Into a Plastic Bag • Low Power Consumption • Low Noise and Low Dust • Small Size and High Efficiency • Safe and Easy to Operate EPS Hot Wire Waste Cuber EPS Waste Grinder Item # Description FG180 Foam Grinder 180 Price 4,725.00 Hot Wire - 3/4” Cubes Item # RFS RFSB Description Recyk™ Foam Saver Recyk™ Bags 36” x 58”, 100 count* FG180 GROUND EPS Foam 2,142.00 80.00 * Bags May Not Be Clear CI TOOL Foam Shredder FD2000 Foam Waste Shreader • Shreds Into Flakes 3/4” to 2” • Shreds EPS, EPP and XPS • Foam Flakes Can Be Recycled • Inlet Sizes from 19” to 47”, Depending on Model • Flakes Take Up Much Less Storage Space Than Unprocessed Containers • Perfect for EPS Molding Factories, Food Thermoforming Factories EPS Recycling Centers, Fragile Product Packaging Shops and Parcel Packaging Centers • 220 voltage Item # Description FG250 FG370 FG430 FG1200 FG1500 Foam Grinder 250 Foam Grinder 370 Foam Grinder 430 Foam Grinder 1200 Foam Grinder 1500 FD2000 Series Compactor Grinder & Compactor in One • Compacts Expanded Polystyrene • Processes up to 200 pounds Per Hour of Loose Foam Depending on Type of EPS and Model • Produces Revenue By Creating a Marketable Product for Recycling • Recycle to Help Save Our Environment • 220 Volt • One Year Warranty Item # Description FD2000 FD3000 Foam Compactor Foam Compactor FG250 www.demandproducts.com • 1-800.325.7540 59 S E R I E S CUTLAS HK5-Dual Oscillating Blade Dual Oscillating Blade CNC is a versatile dual blade machine allowing intricate contouring, block sheeting and many other cuts. The HK5 has a small footprint; advantages are quick blade changes and high speed oscillation with a high quality electronic cabinet. Block size for this machine is 114” x 90” x 51” CNC Type POWER MACHINE WEIGHT Monitor Control OPERATION SYSTEM PROGRAMMABLE AXIS HK5 Industrial control 13.4 HP, 220V, 60HZ ~6,200 LBS LCD MOTION CONTROL CARD WINDOWS MULTI AXIS CONVOLUTER The Cutlas™ Convoluter is a rugged unit designed to split flexible products where thin sheets from slab material are required. Our Cutlas™ Convoluter is available in three sizes, 65”, 84” and 92” wide (which is ideal for producing King Size and Cal King size mattresses). Cutlas™ Convoluters, carousels, bandsaws, blade and wire machines will complement your existing production line of equipment. 3 SIZES DPYX-65 DPYX-84 DPYX-92 60 65” WIDE x 12” HIGH 84” WIDE X 12” HIGH 92” WIDE X 12” HIGH CAROUSEL - SLITTTER - DC73 Demand’s Horizontal Carousel Slitter Foam Saw is a high production machine allowing for high-speed continuous operation with minimal manual handling. It is the ideal machine for the production of mattress toppers. Applications: furniture, bedding, automobile, aerospace, packaging & medical industries Diameter Foam size Maximum foam size ~23 Ft 11 inch 4 ft 11 in (W) × 6 ft 6.5 in (L) ×3 ft 11 in (H) (5 pieces) 7 FT 6.5 IN (W) 9 FT 10 IN (L)× 3 FT 11 in (H) (3 pieces) BANDSAW-Model DPVBS-1500 Our Vertical Blade Bandsaw is powered by a 21 HP Industrial motor and incorporates a built in blade sharpener that keeps the blade razor sharp throughout your project. The large table glides effortlessly along precision rails assuring a smooth clean consistent cut in seconds. Floor space Minimum cutting thickness Maximum cutting height multipLE sizes .20 inches varies OTHER SIZES AVALIABLE HS SERIES HORIZONTAL FOAM SLITTER SAW The Horizontal Slitter is an auto-indexing machine suitable for slicing/sheet cutting various types of flexible foam. It is an excellent solution for furniture, automotive, packaging, athletics and various other industries. MODEL Cutting size Cutting height Cutting thickness HS-65 W 65”×L 79” H 47” .1”~8” HS-84 W 84”×L 11 H 47” .1”~8” 61 SOFT SAWS Soft Polyurethane Saw Pneumatic Handheld Saw Ultra-Sharp Serrated Single-Edge Blade 23” • Designed for Soft Urethane 1/2 Pound Insulation! • Ultra Sharp Blade Cuts Quickly • Free Speed of 3,000 RPMs • Requires 8 CFM @ 93 PSI • Weighs Just 7 Pounds • Blade Length Past Tool - 23” • Powered by IngersollRand® Straight Line Sander • 11/4” Blade Travel PUSAW36 Ultra-Sharp Serrated Double-Edge Blade Item # Description PUSAW36 PUBLADE36 PUBLADE36DE Polyurethane Saw - Includes Blade Replacement Blade Double-Edge Replacement Blade Price 285.00 45.00 75.00 Air Hose and Connections Not Included Soft Spray-Foam Saw Electric Handheld Saw • Designed for Soft Urethane 1/2 Pound Insulation! • Ultra Sharp Blade Cuts Quickly • Free Speed of 3,000 RPMs • Weighs Just 10 Pounds • Blade Length Past Tool - 29” • 11/4” Blade Travel Ultra-Sharp Serrated Blade like the Pneumatic Saw Above PUSAWE Item # Description PUSAWE PUBLADE29 Polyurethane Saw - Includes Blade Replacement Blade Price 545.00 45.00 29” Blade 11” Blade PUSAW11 Polyurethane Saws 11” & 29” Hand Saws For 1/2 Pound Soft Foam PUSAW29 62 CrocTM Cut Resistant Gloves Item # Description Price PUSAW11 PUSAW29 Polyurethane Hand Saw Polyurethane Hand Saw 45.00 55.00 12 per box Item # Description GLOVE-CR-12 CrocTM Gloves POLY PLANERS Solid, Tool Hardened Steel Blade Provides Excellent Wear Characteristics Beveled Blade Edge to Provide Positive Cutting While Reducing Blade Drag Powerful and Rugged .85 HP Air Motor Uses Maximum 33.0 CFM @ 90 PSI All Aluminum Construction Guard Helps Keep Foam Chips Away From Operator 2 Safety Blocks to Prevent Accidental Start-Up Unless Both Start Buttons Are Depressed Simultaneously, the Poly-Plane™ Will Not Start • Virtually Unbreakable Steel Blade • Designed to Cut Hard 2 Pound Foam • Available in 16” and 24” Models • Rugged Air Motor and Dual Safety • Requires 23 CFM @ 87-90 PSI Switches • 16” Model Weighs Just 12.5 lbs • 24 Model Weighs 14.5 lbs 2 Hard Polyurethane Planer Pneumatic Handheld Saw Item # Description PUP16 PUP24 16’ Poly-Plane 24’ Poly-Plane Price 2,160.50 2,281.25 Models -1/2 thru 10+ Pound Foam For Open Cell or Closed Cell • Specialized Cutters for 1/2 lb -10+ lb Foam • Heavy-Duty Commercial Quality • 16” Model Weighs Just 13.2 Pounds • 24” Model Weighs 17.5 Pounds • Replacement Brushes and Blades Available • Rugged Air Motor and Electric Motor • Fafnir Ball Bearings on Cutter Shafts • Air Motors Require 23 CFM @ 125 PSI PUPGPM Spray Foam Grinder Pneumatic Grinding Plate The pneumatic motor operates most efficiently when air pressure is maintained at 125psi. An air compressor able to deliver 23.0cfm is necessary. Incoming air should be dry, clean, and filtered. We recommend using a ¾” line from the compressor, the last 20’ use a ½” airline. Lubricate the tool at least once every 8 hours by pouring a small quantity of air motor oil through the air inlet. Item # Description PUPGPM Grinding Plate Air Motor — Soft Wire* for 1/2 Lb or Hard Wire* for 2 Lb +. Item # Description PUP216A* PUP224A* 16” Poly-Plane 2™ Air 24” Poly-Plane 2™ Air Air Motor — Carbide Blades for Up to 10+ Lb. Foam. Item # Description PUP216AC PUP224AC 16” Poly-Plane 2™ Air Carbide 24” Poly-Plane 2™ Air Carbide *Specify Soft or Hard Wire www.demandproducts.com • 1-800.325.7540 63 POLY-SPRAY Poly-Spray 1™ System Polyurea Spray Hardcoat Photo Credit: Hardcoat LTD. Cory Porterfield • Environmentally Safe • Contains No VOC’s • Coating is Paintable • Color is Neutral • Dries in 7 Minutes at 70° • May Be Painted After 7 Minutes • Six 750 ml Cartridges Will Cover 127 Sq Ft. at 30 mils • 100% Solids, Two-component Aromatic Polyurethane • Smooth Finish Compressor Requirements: Standard 5 hp compressor, with a 20 gallon tank capable of 10 to 12 CFM. For optimum performance, the supply pressure must be greater than 100 P.S.I. and less than 145 P.S.I. Protective clothing, eyewear and breathing devices should be worn. Item # PS75 KITPS75 PSG PSMT Description Cartridge, Each Cartridge, Case of 6 (Quantity Break at 4,8,12 & 36 Cases) Spray Gun Static Mixer w/ Atomizing Tip Static Mixer w/ Air Atomizing Tip Comes w/ Each Cartridge PSMT Photo Credit: Hardcoat LTD. Cory Porterfield 64 PS75 COATINGS 2-Part Hand-Applied Hard Shell Coatings UreShell™ Liquid Rock™ UreShell is a marvelous hard coat 2-part urethane-based coating. 20-25 minute working time allows for rolling or brushing. Applications cover both interior and exterior surfaces. It leaves a hard glossy smooth shell finish. It works great on props, backdrops, signs, molds, etc. 1 gallon covers approximately 320 sq. feet at 5 mil thickness. Dries to a tan color and can be finish coated with most paints and sythentic stucco. Liquid Rock is a 2-part epoxybased coating that can be applied on interior and exterior surfaces. It has extraordinary flow characteristics. It leaves a hard glossy smooth shell finish. It works well on props and backdrops when a hard finish is preferred. It can be brushed or rolled. Average working time is 20-25 minutes. 1 gallon covers approximately 320 sq. feet at 5 mil thickness. Dries off-white and can be painted. Item # US1 KITUS1 Item # LR1 KITLR1 2-Part Urethane Description UreShell, 1 Gallon UreShell, 4 Gallon Kit 2-Part Epoxy Price 85.00 320.00 Price THEATER 69.00 262.00 MAGIC Description Liquid Rock, 1 Gallon Liquid Rock, 4 Gallon Kit Specialty Coatings Cement Texture Elasta-Shield™ Theater Magic™ Dries clear. Water soluble flexible shield protects EPS foam for general handling. Will act as an adhesive for applying fabrics if they are applied while ElastaShield is wet. Can be brushed, rolled or sprayed. Covers 320 sq. ft. at 5 mils. Add Water and Mix. Cementitious coating. Combination of Portland Cement, Polymers & Sand. For either interior or exterior surfaces. Developed for EPS foam. Dries Gray. Use trowel, or spray. Covers 90-100 sq. ft. at 1/8” to 3/16”. Item # ESC KITESC Item # TM50 Smooth Vinyl-Acrylic Protective Skin Price Description Elasta-Shield 1-gallon 39.00 Elasta-Shield 4-gallon 148.00 Cementitious Stucco Finish Description Theater Magic Price 32.00 Stonewall™ Rule of Thumb 1 mil thickness of liquid will theoretically cover 1604 square feet. (If you need 5 mils thick — 5 divided into 1604 would be 320 sq. ft.) To calculate the square footage of coatings per gallon Stucco-Like Acrylic Finish Water-based, elastomeric coating. Allows definition to show. For either interior or exterior surfaces. Works well over EPS foam and other surfaces. Dries white. Can be brushed, rolled or sprayed. Covers 320 sq. ft. at 5 mils. Item # SWC SWC5 Description Stonewall Foam 1 Gallon Stonewall Foam 5 Gallon Price 38.00 160.00 www.demandproducts.com • 1-800.325.7540 65 CRAFTERS Foam CraftCutter™ Crafters Precision Hot Knife Rod Style Knife • Continuous Duty Cycle • 1/8” Diameter Stainless Steel Tube • Versatile Sled Guide Accessory CRAFTHD Item # HKTPR6 HKTPR9 HKTPR69 HD Description 6” Knife with Sled 9” Knife with Sled 6” & 9” Knives with Sled Heat-Dial Craft-Cutter™ Variable Heat Craft-Cutter™ Item # CRAFTHD Description HD Craft Cutter HKTPR6 Price 79.95 HKTPR9 HAND-HELD TOOLS 5” Opening 13/4” Opening Hand Wire™ Hand-Held Hot Wire Foam Cutter HCB HCE Item # HCE HCB Description 110 Volt Hand Cutter Battery Hand Cutter Price 39.95 119.95 HCE-110 Volt Operation HCB-Uses Two “C” Batteries Tippi Craft Hot Knife Foam Cutter Ideal For Adding Intricate Detail & Depth To Projects • Lightweight and Agile • Uses Standard 110 Volt - Power Transformer Included • LED Indicates Operation Item # TIPPI TIPPI 66 Description Tippi Hot Knife THERMOCUT 115 Hot Wire Cutter For Architectural Models, Protoypes, Model Railroads, Planes & Boat Items • 15 11/32” x 11” Cutting Table • Grid and Protractor Assists Division & Cutting • Overarm Has 13 ¾” Throat and 5 ½” Height • 98ft Spool of Wire Included • Wire Heats to Maximum in Less Than 1 Sec. • LED Indicates Operation and Hot Wire • Allows Miter Cutting CRAFTERS Precision Model-Maker™ 24.5” x 10.4” Table • Built-In Power Supply • Variable Heat Settings • 15” Wire Height • 3.3” - 8.2” Wire Height • Weighs 17.6 Pounds • Comes Complete With Angle Guide • Pipe Support • Protractor & Roll of Wire • Horizontal Straight Guide • 2 Rollers • Foot Switch Item # HCM3S Description Precision Model Maker Price 895.00 Hobby Table 12” x 22” Table Mighty Might ™ 10” x 15” Table • Built-In Power Supply with 3 Heat Settings • 8” Wire Height •12” x 22” Cutting Table • Built-In Power Supply • Variable Heat Settings • 63/4” Wire Height Item # HCM2S Item # HCM2SP Description Hobby Table Price 295.00 Description Mighty Might 12” Free Form Craft Cutter 12” x 12” Table • Built-In Variable Power Supply •The “Hot Wire Jig Saw” • Made in the USA Item # CTC12 Item # PT-CUT115 Description Free Foam Cutter Description Thermocut 115 www.demandproducts.com • 1-800.325.7540 67 1055 Nine North Drive • Alpharetta, GA 30004 USA DEMAND PRODUCTS. CREATING SOLUTIONS FOR THE FOAM INDUSTRY HOT KNIFE ™ CR CutRite ™ Page 12 DURARASP™ Page 26 PBH™ WASHERS Page 06 www.demandproducts.com • 1-800-325-7540 USA & Canada