Transcript
DEMI XG-2020
Built-in
Write Protecti o
n
Forensic Hard Drive Imager for SAS Drive
The DEMI XG-2020 “Ninja SAS” is native SAS HDD service tool. It is super lightweight and easy to carry all-in-one tool used for tasks such as testing, wiping, duplication, analysis, data recovery and forensic acquisition. Unlike PC-based software solutions, the Demi’s dedicated hardware design allows for maximum speed and flexibility.
Features 1 1 2 3 4 5 6
Duplication
Multiple copy functions at fastest speeds in industry (up to 5 GB/min. for high-speed hard drives) Data Wipe Secure data erase functions. Compliant with NSA and DoD. Test Multiple functions for HDD diagnostic and qualification Repair Bad Sector Reassignment and �Bad Sector Clipping (HPA on/off) Display with SAS* Configuration SMART Status Check Full SMART info display for professional HDD diagnostics PC/Laptop HDD DUPLICATION without disassembly (available soon*) Capture directly from a desktop/laptop computers (via RJ45 interface*) with the Bootable CD*
Bad-Sector Skip Functions for Data Recovery 1
Skip Unrecoverable Sectors Automatically jumps unreadable sectors to acquire maximum data using hardware and software resets to maintain HDD health.
*Bootable CD will be released soon. *Capture speed may vary. Average 600MB/min. *Optional Board Required
Tel: 562.597.1482 • Fax: 714.895.7300 • Email:
[email protected]
www.Ji2.com
DEMI XG-2020
Built-in
Write Protecti o
n
Forensic Hard Drive Imager for SAS
Functions Fastest processing speed in industry (5 GB/min). Works for any MFG ATA/IDE, SATA or SAS HDD (all sizes and trasfer modes: 3.5" to 0.85," PIO to UDMA) (All PIO/UDMA Modes and SATA modes) Stand-alone or PC-controlled operation Adjustable Parameters for every function: tailor each operation to your specific needs Complete HPA/DCO control: add/remove HPA/DCO settings on ATA and SATA disk Reliable Write Protection: ensure Master data is not altered during duplication process Data Recovery Copy functions: to extract all usable data from damaged or unstable hard drives by skipping bad sectors, issuing resets, etc. Sector-to-Sector Copy: for producing identical disk duplicate disks YEC Smart Copy System: copy only the used disk area to drastically reduce copy time The industry's only data-only copy system for any OS or file system CRC Compare: verify copied data to ensure 0% failure rate Cross-Interface Copy: allows the user to copy between any interface (ATA-ATA, ATA-SATA, SATA-SATA, SAS-SAS, SAS-SATA, SATA-SAS, etc.) Test During Copy: in-depth quality control with no extra time or effort invested Low Level Format: secure data erasure (1 time overwrite of each sector) Customizable overwrite pattern for any HEX value (E5, 00, FF, etc)
Specifications 2 HDD Interface
SAS, SATA Native SAS,I/II SATA I/II and IDE/ATA. Conversion Adapters available for, SCSI (50, 68, 80 pin), Fibre Channel, USB 2.0 and Firewire 800
3
HDD Ports
Duplication: (1:2SAS, 1:1 ATA,SATA SATA & SCSI) or (1:1 SaS & Fibre Channel). Test, Wipe & Erase: 2(3Ports PortsSAS, ATA,SATA SATA & SCSI) or (2 Ports SaS & Fibre Channel)
Host Interface
USB 2.0, LAN (1000BASE-T/100BASE-TX/10BASE-T) Firewire (IEEE1394) 800, LAN (Ethernet) Cross Cable
HDD interface Mode
Supports all manufacturer’s SAS, SATA, SATA, ATA,Forensics SAS, SCSI, Acquisition Fibre Channel, (MD5, USB SHA-1, 2.0, SHA-256) Firewire 400/800 (Native maximum support = 300 mb/s)
Power Control
AC 100v ~240v (50/60Hz). Any 3v~12v HDD (optional adapters may be needed)
Modes
Duplication, Clip, Erase, Test, Data Recovery
Dimensions
300mm X 220mm 303mm 250mm X 95mm 70mm (W x L x H)
Weight Weight
4.5 lbs (not including optional interface connectors) 4.8
Options
Optional adapters Interface cartridges(1.8", required ZIF, 2.5", for certain etc) interfaces (please inquire for details)
*The Specifications are subject to change without notice.
Package Includes: DEMI XG-2020 Main Unit, AC Power Adapter and Cable, ATA HDD Power Cable (Y-7111) x2, SATA HDD Power Cable (Y-7112) x2, SAS/SATA Interface Cable (Y-7072) x2, IDE-SATA Adapter (Y-6393) x2, ATA Interface Cable (Y-7060) x2, 3.5 <-> 2.5 HDD Interface conversion Adapter 44P (Y-6251) x2, Operation Manual (S/W & H/W)
11235 Knott Avenue Suite C • Cypress, California 90630
Tel: 562.597.1482 • Fax: 714.895.7300 • Email:
[email protected]
www.Ji2.com
