Dental Alloys Table Of Technical Data

Transcript

Page 1: Composition Content in mass % Applications Au Ag Pt Pd Cu Sn Zn In Ta Ir Ru 1) Preheating Solidus Liquidus Temperature Others ˚C ˚C Casting Crucible 1) Hardness Temperature 0,2% Yield strength HV5 ˚C ˚C Density g/cm³ w/k v MPa s w/k 1) Elongation 2) 1) 1) Young‘s modul % v w/k GPa Processing Cooling Soft Annealing after after ˚C / min oxide firing ceramic firing* Coeff. of thermal expansion (CTE) 6) Oxide Firing 25 – 500 ˚C 2) µm/m*K v ˚C / min vacuum – 2,0 – 0,3 0,4 – 3,4,5,15 A) 3,4,5,15 A) 3,4,5,15 A) 3,4,5,15 3,4 A) 3,4,5,15 A) 3,4,5 A) 3,4,5,15 A) 3,4,5,15 3,4,5 3,4,5,15 3,4 3,4 3,4,5,15 90,0 88,7 86,6 86,2 86,7 85,9 75,0 85,9 77,7 86,6 84,2 82,8 86,7 78,5 – – – – – – 8,0 – – – – – – – 7,9 9,49 10,4 11,5 11,2 11,7 14,3 11,7 19,5 10,8 7,7 16,0 11,0 10,0 – – – – – – – – – – 5,3 – – 7,8 – – – – – – – – – – – – 0,2 – – – – – – – – – – – – – – – 1,5 1,5 1,5 1,5 1,5 2,5 1,5 2,0 – – – – – – – 0,2 – 1,7 x – x – 1,7 2,4 1,0 1,7 3,5 – – 0,2 0,3 – – 0,2 – 0,3 0,3 – – – – x x 0,1 – 0,1 x – x 0,5 – x 0,2 0,1 0,2 – – – 0,4 – – – – – – x – – – 0,1 Fe, 0,1 Mn, 0,2 Rh, 0,1 Nb, x Ce 0,1 Mn, 0,2 Rh 0,1 Mn, 0,9 Rh 0,1 Mn 0,3 Fe 0,1 Mn, 0,15 Rh, 0,5 Nb, x Fe – 0,1 Mn, 0,15 Rh, 0,5 Nb, x Fe – 0,6 Rh 0,3 Fe – 0,3 Fe – 3,4,5,15 77,8 1,3 9,5 9,0 0,3 0,6 – 1,2 – x x 0,2 Fe 3,4,5,15 51,5 – – 37,9 – – – 8,5 – x x 2,0 Ga s/v/k 3,4,5,15 51,5 18,0 – 26,6 0,2 2,7 – 0,9 – x x – s/v/k 3,4,5,15 39,0 19,4 1,0 35,0 – 5,0 – 0,5 – x x – 4 Herabond 4 Herabond N 4 s/v/k 3,4,5,15 – 32,6 – 56,6 – 6,8 0,2 3,4 – 0,2 0,2 – s/v/k 3,4,5,15 5,3 6,5 – 74,4 – 8,0 – 1,0 – – 0,3 4,5 Ga Albabond A 4 Albabond B 4 s/v/k 4 Implant Bio Supra x Ce 3,4,5,15 – 27,8 – 60,1 – 3,0 0,2 7,0 – 0,2 0,2 1,5 Ga eram 1080 1175 900 1325 G 19,1 235 260 225 3) 600 630 4 3) 3 93 3) Bio eram Plus Bio Herador SG Bio Herador CN Bio Herador N Bio Herador GG Bio Herador MP Herador EC Herador MP Herador PF Herador C Herador S Herador G Herador GG Herador H 1040 1055 1055 1050 1010 1060 1015 1060 1050 1060 1080 1130 1020 1150 1100 1130 1140 1130 1110 1140 1110 1140 1160 1135 1150 1200 1125 1200 850 850 850 850 900 800 800 800 900 850 900 900 900 4) 900 – 950 1250 1280 1290 1280 1260 1290 1260 1290 1310 1285 1300 1350 1275 1350 G G G G G G G G G G G G G G 19,0 19,0 18,6 19,0 19,2 18,9 17,8 18,9 19,1 19,1 18,3 19,4 19,2 17,6 220 215 215 205 160 220 195 220 225 160 235 150 150 220 220 220 230 220 170 3) 210 220 3) 210 255 200 260 190 170 270 180 180 190 185 125 190 155 190 195 125 200 120 125 200 520 520 560 500 330 580 440 580 600 395 610 370 330 600 520 540 645 555 460 3) 560 490 3) 560 640 480 650 480 460 710 3 6 4 6 13 6 9 6 4 15 10 11 13 8 3 5 3 5 7 3) 6 7 3) 6 3 11 5 9 7 5 90 90 94 90 90 94 100 94 100 89 101 95 90 118 Herador NH 1160 1260 900 – 950 4) 1410 G 17,7 205 255 185 540 650 9 7 109 Heraloy G 1130 1280 900 1430 K 14,5 250 260 210 550 600 23 14 132 Herabond 1190 1230 900 1380 G 14,3 220 260 200 520 600 12 8 134 Herabond N 1200 1250 900 1400 K 13,2 235 270 215 620 690 7 4 145 Albabond B 1120 1300 900 1450 K 11,7 225 240 225 460 470 41 40 128 Albabond A 1165 1285 900 1440 K 11,4 205 235 220 460 540 26 18 122 Implant Bio Supra high gold content – high gold content – s/v/k Heraloy G Heralight 18,3 reduced gold v/k 4 – reduced gold 4 s/v/k 4 s/v/k 4 s/v/k 4 v k 4 ,3 s/v/k 4 v/k s 4 ,3 s/v/k 4 s/v/k 4 v/k 4 v/k 4 v/k 4 v k 4 ,3 s/v/k 4 79,0 A) Pdbased Pdbased reduced gold Herador NH 3,4,5,15 s/v/k Pdbased high gold content Bio eram Plus Bio Herador SG Bio Herador CN Bio Herador N Bio Herador GG Bio Herador MP Herador EC Herador MP Herador PF Herador C Herador S Herador G Herador GG Herador H s/v/k 4 ˚C Prior to Ceramic Firing min After Ceramic Firing Working temperature ˚C* / Solder colour Solder eram 1) 13,7 880 /10 Bio eram Plus Bio Herador SG Bio Herador CN Bio Herador N Bio Herador GG Bio Herador MP Herador EC Herador MP Herador PF Herador C Herador S Herador G Herador GG Herador H 14,7 14,5 14,5 14,3 14,5 14,3 14,8 14,3 13,7 14,4 14,3 13,9 14,5 13,9 1) 880 /10 1) 880 /10 1) 880 /10 1) 880 /10 1) 880 /10 1) 880 /5 1) 880 /10 1) 880 /5 1) 880 /10 1) 880 /10 1) 880 /5 1) 880 /5 1) 880 /10 1) 880 /5 Herador NH 13,9 880 /5 1) – ✓ S Au 3) 450 – 450 450 450 500 5) 450 500 5) 450 500 500 500 500 500 600 – 15 15 15 15 5) 20 15 5) 20 15 15 15 15 15 15 600 15 ✓ ✓ ✓ – – – – – – – – – – – – – – – S S S S S S S S S S S S S S L 3) L 3) L 3) L 3) L 3) L 3) L 3) L 3) S 3) L 3) L 3) S 3) L 3) S – – S S ✓ ✓ ✓ ✓ ✓ – ✓ – ✓ – 3) 1) – – S S 1) – – S 1) – – S Heraloy G 13,9 880 /5 Herabond 14,5 880 /5 Herabond N 14,2 880 /5 Albabond B 13,5 1) 880 /10 Albabond A 14,7 880 /5 1) 1) 10 5) 650 15 L 3) 650 15 L 3) 600 15 3) 600 15 600 15 – S S – – S L 3) 3) Heralight 14,4 880 /5 – – S L 95 HeranormSun 16,1 800/10 – 575/20 S – 550 Heralight 1225 1280 900 1430 K 11,2 255 290 290 555 620 25 20 148 140 385 450 11 6 600 Implant Bio Supra 5) 3) – 15 eram Herador (PF) Lot 4 s/v/k 4 AlbaSun 4 ,3 s/v/k v s/k v/k s Bio Heranorm 4 ,3 Mainbond EH Mainbond A Keramikgold PKF Keramikgold N Hera KF Hera Ecobond Heradent Herabest 4 s/v/k 4 v/k s 4 ,3 v/k s 4 ,3 v k 4 ,3 s/v/k 4 s/v k 4 ,3 s/v/k 4 Herastar s/v/k s/k 4 71,0 17,3 8,5 – – – 2,4 – 0,3 – – 0,5 Rh HeranormSun 1005 1040 800 1170 G 16,3 150/170 185 1,2,3,4,5,10,14,15 A) 1,2,3,4,5,10,14,15 74,0 55,0 14,5 23,0 1,5 12,5 5,5 2,5 – – – – 3,3 4,5 1,0 2,0 0,1 0,1 0,1 – – 0,4 – – MainbondSun AureaSun 950 960 1030 1045 750 750 1160 1175 G G 15,7 14,7 160/250 150/205 240 230 235 190 700 470 660 490 4 5 4 4 100 110 MainbondSun AureaSun 16,3 16,1 800/10 800/10 – – 650/15 600/15 S S – – 1,2,3,4,5,10,14 2,0 58,0 – 32,9 – 2,0 3,5 1,5 – x x – AlbaSun 1045 1105 800 1235 G 10,8 150/175 210 170 310 450 11 5 108 AlbaSun 16,6 800/10 – 800/15 S – 1,2,3,4,14 3) 2) 970 1035 750 1170 G 16,5 125/160 190 130 400 420 12 7 90 Bio Heranorm 16,0 800 /10 Mainbond EH Mainbond A Keramikgold PKF Keramikgold N Hera KF Hera Ecobond Heradent Herabest 895 890 990 980 985 970 1070 960 1010 990 1050 1045 1070 1040 1165 1060 700 700 800 750 850 750 850 800 1140 1120 1180 1180 1200 1190 1295 1210 G G G G G G G G 16,0 16,7 16,7 16,6 14,1 12,7 11,0 13,9 170/260 150/190 180/205 150/190 155/170 165/220 170/180 155/210 295 230 220 200 255 240 250 235 280 180 135 145 205 205 200 200 530 440 455 470 300 540 320 480 600 500 450 480 640 575 535 575 18 9 6 8 20 4 15 6 21 6 7 7 6 3 5 3 100 96 95 97 93 98 100 97 Mainbond EH Mainbond A Keramikgold PKF Keramikgold N Hera KF Hera Ecobond Heradent Herabest 16,0 16,3 15,7 15,9 16,7 16,9 16,2 16,7 800 /10 2) 800 /10 2) 800 /3 2) 800 /15 2) 800 /5 2) 800 /10 2) 800 /10 2) 800 /5 – Herastar 965 1050 800 1200 G 13,0 170/220 – 210 550 – 5 – 107 Herastar 16,6 800 /10 ✓ – 16,3 8,5 – – 0,5 2,0 – 0,2 – – – 70,0 74,1 75,0 72,9 55,0 36,7 – 57,0 13,4 9,0 12,5 14,5 30,5 36,7 53,0 27,0 8,5 8,9 9,0 8,9 – – – – – – – – 9,9 16,5 39,9 10,0 7,5 4,4 – – – – – – – – – – – – 1,5 0,55 0,5 2,0 2,0 1,5 2,0 – 3,5 1,4 – 1,5 – 1,5 2,5 10,0 2,0 4,0 – – 0,45 0,2 – – – – 0,1 0,1 x 0,1 x 0,1 x x – – – – x – x – – – 1,0 Rh 0,4 Rh – – – – 1,2,3,4,5,14 40,0 35,9 – 15,0 – – – 9,0 – 0,1 – A) 3) Bio Heranorm 72,5 1,2,3,4,5 ,6,14,15 B) A) 1,2,3,4,5 ,14,15 C) A) 1,2,3,4,5 ,14,15 A) 1,2,3,4,14,15 A) 1,2,3,4,5,10,14,15 1,2,3,4,5,14 B) 1,2,3,4,5 ,10,14 A) 1,2,3,4,5,10,14,15 B) 3) 2) 2) ✓ – – – – ✓ – – 7,9 – 7,4 3,8 – 1,0 x x – 1030 1095 A 1100 62,5 71,9 68,9 79,0 64,0 77,4 70,5 70,5 3,0 5,0 20,0 16,6 35,0 18,0 6,5 6,5 – – 9,0 3,0 – 1,97 – 1,4 16,4 12,0 – – 0,45 – 1,4 – 16,0 8,0 – – – – 13,0 13,0 1,0 1,0 – – 0,5 – 5,5 5,5 1,0 2,0 1,0 1,3 – 2,5 3,0 3,0 x x 0,1 0,1 x – x 0,1 x x – – x x x – – – 1,0 Sn – – 0,1 Mn – – 1010 1000 1005 990 980 940 715 715 1065 1045 1060 1035 1030 995 785 785 A A A A A A B B 1070 1060 1060 1040 1030 1010 800 800 1100 1070 1060 Herador NH Herador Lot 1100 1070 1060 1040 1040 1040 1040 1040 1040 1040 1060 Herador Lot V 800 38,0 36,7 – – 25,0 – 0,3 – – – 775 785 B 800 1070 1060 S 1060 S Herador / Maingold Lot 4) 1010 4) 1010 4) 1010 4) 1010 4) 1010 1060 S 1060 S – ✓ ✓ ✓ – ✓ ✓ ✓ ✓ 800 ✓ 1) 800 ✓ – 1) 800 ✓ 2) Herabond 1) 800 ✓ 1) 800 1) Herador Lot V 800 1070 1060 1060 S Herador Lot V Herador Lot 1100 1070 1060 1060 S Herador Lot V Herabond N Herador Lot 1100 1070 1060 1060 S Herador Lot V Albabond B Herador Lot 1070 1060 1060 S Herador Lot V Albabond A Herador Lot 1070 1060 1060 S Herador Lot V Herador Lot 4) HeranormSun HeraSun Lot 1 900 HeraSun Lot 2 710 5) 1060 S 2) Herador MP ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Herador Lot 1060 ✓ – 800 Herabond 1070 ✓ ✓ 1) Heraloy G 1100 2) Bio Herador N – ✓ 2) Albabond B – – 4) 15 500 500 5) 10 15 MainbondSun AureaSun HeraSun Lot 1 HeraSun Lot 1 900 900 HeraSun Lot 2 HeraSun Lot 2 710 5) 710 550 15 AlbaSun HeraSun Lot 1 900 HeraSun Lot 2 710 5) ✓ ✓ Solders for Universal Alloys HeraSun Lot 1 5) 79,0 13,5 1,45 – – – 6,0 x – – 820 890 1/A 900 ✓ ✓ ✓ ✓ HeraSun Lot 2 Mainbond Lot 875 73,0 75,5 12,0 12,0 0,45 0,45 – – – 9,5 – – 14,5 2,5 x x – – – – 670 825 700 875 2/B 1/A 710 875 5) HeraSun Lot 1 900 HeraSun Lot 2 710 Mainbond Lot Mainbond Lot Spezial Lot HeraSun Lot 1 Mainbond Lot HeraSun Lot 1 Mainbond Lot HeraSun Lot 1 875 875 970 900 875 900 875 900 HeraSun Lot 2 HeraSun Lot 2 HeraSun Lot 2 HeraSun Lot 2 HeraSun Lot 2 HeraSun Lot 2 HeraSun Lot 2 HeraSun Lot 2 710 5) 710 5) 710 5) 710 5) 710 5) 710 5) 710 5) 710 Herastar HeraSun Lot 1 900 HeraSun Lot 2 710 – 5) – 5) 5) ✓ ✓ Spezial Lot 970 68,0 23,5 4,4 – – – 4,05 x – – 900 965 1/A 970 5) ✓ ✓ ✓ ✓ ✓ ✓ Solders for High Gold Content Casting Alloys Maingold Lot 850 70,5 5,0 – 3,9 13,0 5,5 2,0 x x – 770 850 1 850 Herador/Maingold Lot 800 Maingold/Hera Lot 750 Herador/Maingold PF Lot 800 Maingold PF Lot 750 U-Lot 820 Hera Lot 800 70,5 59,8 70,5 59,8 71,5 55,6 6,5 14,8 6,5 14,8 16,0 18,0 – – 1,4 0,2 1,0 – 1,4 0,2 – – 0,9 4,4 13,0 15,2 13,0 15,2 – 11,9 5,5 6,0 5,5 6,0 – 6,0 3,0 4,0 3,0 4,0 10,5 4,0 x – 0,1 – x x x – – – x x – – – – – – 715 650 715 675 730 720 785 755 785 745 805 790 1 2 1 2 1 1 800 750 800 750 820 800 Solders for Precious and Non-Precious Alloys Stahlgold Lot 750 42,0 2) Bio Heranorm 2) Bio Heranorm ✓ ✓ 2) Hera KF 2) AlbaSun 2) Hera KF 5) 2) Hera KF 12,2 – 0,5 – – 0,1 – – Bio Maingold SG 875 920 700 1050 G 15,4 160 250 250 380 630 42 16 99 Bio Maingold SG – – – 750/5 – – – 350 15 Bio Maingold SG Herador / Maingold PF Lot 800 1,2,3,4,5 ,10,15 B) A) 1,2,3,4,5 ,10,15 4,5,6 B) 4,5 ,6,10,15 C) A) C) 1,2,3,4,5 ,15 ,16 1,2 B) 71,0 72,0 70,0 70,0 84,5 77,0 12,3 13,7 13,5 13,4 – 13,0 2,0 3,6 4,4 7,5 10,1 1,0 1,9 – 2,0 0,95 – – 12,2 9,8 8,8 7,6 – 8,5 – – – – – 0,5 0,8 1,2 0,5 4,5 0,2 – – – – – 0,2 – – – – 0,5 – x 0,1 0,1 x – 0,1 x – – x 0,4 – – – – – – – Maingold SG Maingold MP Maingold Premium Maingold OG Bio Maingold TK Bio Maingold IT 900 905 900 930 940 890 930 960 970 990 990 930 700 700 700 700 700 700 1060 1090 1100 1120 1120 1060 G G G G G G 15,4 15,6 15,7 15,7 18,1 15,8 160 150 170 180 140 120 250 225 235 295 210 165 230 220 235 245 170 130 380 320 400 380 260 225 670 550 620 730 540 290 45 40 30 37 13 50 20 14 17 13 6 40 99 95 99 102 83 91 Maingold SG Maingold MP Maingold Premium Maingold OG Bio Maingold TK Bio Maingold IT – – – – – – – – – – – – – – – – – – 750/5 750/30 750/5 750/5 800/15 750/15 – – – – – – – – – – – – – – – – – – 350 450 450 450 350 300 15 15 15 15 15 15 Maingold SG Maingold MP Maingold Premium Maingold OG Bio Maingold TK Bio Maingold IT Maingold Lot 850 Herador / Maingold Lot 800 Maingold / Hera Lot 750 Herador / Maingold PF Lot 800 Maingold PF Lot 750 Maingold Lot 850 Herador / Maingold Lot 800 Maingold / Hera Lot 750 Maingold Lot 850 Herador / Maingold Lot 800 Maingold / Hera Lot 750 Herador / Maingold PF Lot 800 Maingold PF Lot 750 Herador / Maingold PF Lot 800 Maingold PF Lot 750 v w 3 ,1 1 91,7 2,8 3,45 – – – 2,0 – – x – – Bio Maingold I 935 1035 700 1160 G 18,5 70 140 140 115 295 34 16 85 Bio Maingold I – – – 750/15 – – – 400 15 Bio Maingold I Herador / Maingold PF Lot 800 Maingold PF Lot 750 Hera SG 840 895 700 1000 G 13,7 195 280 280 530 860 25 5 100 Hera SG – – – 750/15 – – – 400 15 Hera SG Hera Lot 800 Maingold / Hera Lot 750 Hera GG 870 920 700 1050 G 14,1 160 265 265 340 780 38 6 103 Hera GG – – – 750/15 – – – 400 15 Hera GG Hera Lot 800 Maingold / Hera Lot 750 ✓ ✓ Stahlgold Lot 910 !! Hera PF 820 890 700 1030 G 14,2 170 280 260 440 760 35 7 93 Hera PF – – – 750/15 – – – 400 15 Hera PF Herador / Maingold PF Lot 800 Maingold PF Lot 750 ✓ ✓ Stahlgold Lot 910 contains Nickel! – high gold content – high gold content 3,9 high gold content high gold content 12,3 w/v Maingold SG 4 v w Maingold MP 4 ,3 w/v Maingold Premium 4 w/v Maingold OG 4 v w Bio Maingold TK 4 ,2 v w Bio Maingold IT 3 ,2 Bio Maingold I 71,0 1,2,3,4,5 ,10,15 Maingold PF Lot 750 ✓ ✓ 2) Bio Maingold SG ✓ ✓ 2) Bio Maingold SG 2) Mainbond EH 2) Bio Herador N 2) Bio Maingold SG 2) Bio Maingold SG B) 55,6 24,4 1,0 3,7 14,0 – 1,0 0,2 – x x – 1,2,3,4,5 ,6,10,15 B) 59,3 22,9 0,6 3,7 13,0 – 0,4 – – x x – B) 59,3 22,9 4,3 – 13,0 – 0,4 – – 0,1 – – Hera GG 4 ,3 Hera PF 4 w/v 1,2,3,4,5 ,6,10,15 v w reduced gold 1,2,3,4,5 ,6,10,15 reduced gold w/v 4 reduced gold reduced gold Reduced Precious Metal Casting Alloys acc. to EN ISO 22674 Hera SG 2) Hera GG 24,4 – 3,0 16,5 7,0 4,0 x x 3,0 Mn 660 760 EM/CoCr 750 80,0 – – – – – 4,0 – – 1,0 Sn/15,0 Ni 855 910 NEM/CoCr 910 Heraenium P Lot 1 Co 38,7 Cr 21,8 Fe 29,0 Si 5,4 Mo 2,7 B 1,0 V 1,0 Mn 0,4 – – Au Pd Cu In Mn Ir Ru Heraenium NA Lot 1 58,9 22,0 15,0 1,0 3,0 x x – – – 1150 Cr 21,8 Fe 41,6 Si 5,4 Mo 2,7 B 1,0 V – Mn 0,4 – – Working temp. °C 1095 1185 1/A 28 – 0,5 5,5 – – 0,7 – – – – *Notes: See legend chemical composition Mo 4,0 – Mo 10,0 10,0 Mo 2,0 Mo 6,6 6,5 6,5 Mn 0,8 0,8 Mn 1,5 – Mn 0,8 Mn 0,6 0,6 0,6 Si 1,0 1,0 Si 1,2 2,0 Si 1,0 Si 1,0 1,0 1,05 C – – C – – C 0,1 C 0,3 0,15 x N 0,2 x N – – N 0,15 N 0,2 0,25 0,3 Ta – – Ta 1,5 – Ta – Ta – – – Fe – 4,0 Fe 1,5 1,5 Fe 27,0 Fe – – – Nb – – Nb 1,0 – Nb – Nb – – – W 10,0 15,0 W – – W 2,5 W – – – Others – – Others – 0,6 Ce Others – Others – – – Ceramic Bonding Alloys (CoCr) acc. to EN ISO 9693 and 22674 Ceramic Bonding Alloys (CoCr) acc. to EN ISO 9693 and 22674 Heraenium P 1305 1400 950 – 1000 Heraenium Pw 1320 1400 950 Ceramic Bonding Alloys (NiCr) acc. to EN ISO 9693 and 22674 Heraenium NA 1190 1300 850 Heraenium S 1200 1350 850 – 900 Universal Bonding Alloy (CoCr) acc. to EN ISO 22674 and 9693 HeraeniumSun 1290 1380 950 Partial Denture Alloys (CoCr) acc. to EN ISO 22674 Heraenium CE 1330 1380 950 – 1050 Heraenium EH 1330 1380 950 – 1050 1550 1550 Ceramic NPM Ceramic NPM 8,8 8,9 330 HV10 290 HV10 – – 320 HV10 275 HV10 650 530 – – 8 8 – – 200 208 1450 1500 Ceramic NPM Ceramic NPM 8,3 8,2 200 HV 10 200 HV 10 – – 190 HV 10 180 HV 10 360 335 – – 30 23 – – 222 224 1500 Ceramic NPM 8,2 280 HV 10 – 265 HV 10 490 – 18 – 250 1530 1530 Ceramic NPM Ceramic NPM 8,0 8,0 – – – – 380 HV 10 310 HV 10 – – 580 620 – – 4 7 228 228 Heraenium Laser 1530 Ceramic NPM 8,0 – – 340 HV 10 – 610 – 12 220 1330 1380 *Notes: See legend Technical Data, melting and casting 1000 non precious ceramic bonding alloys Cr 25,0 24,0 Cr 24,0 23,0 Cr 23,45 Cr 27,8 28,0 28,0 partial denture alloys Ni – – Ni 59,3 62,9 Ni – Ni – – – non precious ceramic bonding alloys Co 59,0 55,2 Co – – Co 43,0 Co 63,5 63,5 63,5 partial denture alloys non precious ceramic bonding alloys partial denture alloys s/k Heraenium P 5 3,4,5,6 k s Heraenium Pw 5 ,4 3,4,5,6 Ceramic Bonding Alloys (NiCr) acc. to EN ISO 9693-1 and 22674 s/k Heraenium NA 4 3,4,5 s/k Heraenium S 3 3,4,5 Universal Bonding Alloy (CoCr) acc. to EN ISO 22674 and 9693-1 s/k HeraeniumSun 4 3,4,5,6,14,15 Partial Denture Alloys (CoCr) acc. to EN ISO 22674 s Heraenium CE 5 6 s Heraenium EH 5 6 s Heraenium Laser 5 6 Heraenium P 13,8 Heraenium Pw 14,3 Ceramic Bonding Alloys (NiCr) acc. to EN ISO 9693 and 22674 Heraenium NA 14,1 Heraenium S 13,7 Universal Bonding Alloy (CoCr) acc. to EN ISO 22674 and 9693 HeraeniumSun 16,2 Partial Denture Alloys (CoCr) acc. to EN ISO 22674 Heraenium CE – Heraenium EH – Heraenium Laser * Notes: See legend ceramic firing – 3) 950 /10 3) – 3) 950/10 3) 950/10 – 3) 3) ✓ 3) – – – – – – – – 3) – – – 3) 3) 3) HeraCeram/f* HeraCeram/f* n 3) n – – – – HeraCeram/f* HeraCeram/f* f 3) f 3) – – – – HeraCeramSun/f* n 3) – – – – – – – – – – – – – – – – – – – – – – – – – – Heraenium P Heraenium P Lot 1 Heraenium Pw Heraenium P Lot 1 Ceramic Bonding Alloys (NiCr) acc. to EN ISO 9693 and 22674 Heraenium NA Heranium NA Lot 1 Heraenium S Heranium NA Lot 1 Universal Bonding Alloy (CoCr) acc. to EN ISO 22674 and 9693 HeraeniumSun Heraenium Sun Lot 1 Partial Denture Alloys (CoCr) acc. to EN ISO 22674 7) partial denture alloys Non Precious Alloys non precious ceramic bonding alloys Ceramic Bonding Alloys (CoCr) acc. to EN ISO 9693 and 22674 Ceramic Bonding Alloys (CoCr) acc. to EN ISO 9693-1 and 22674 ˚C 79,8 Lot 1070 Lot 1060 Lot 1060 S PF Lot 1040 Lot 1030 PF Lot 1010 / Maingold Lot 800 / Maing. PF Lot 800 B) w/v 4 ˚C Herador Herador Herador Herador Herador Herador Herador Herador High Gold Content Casting Alloys acc. to EN ISO 22674 Bio Maingold SG Liquidus ˚C Herador Lot 1100 Mainbond EH Mainbond A Keramikgold PKF Keramikgold N Hera KF Hera Ecobond Heradent Herabest 3) Solidus – Bio Heranorm L Others ✓ ✓ 15 15 15 15 15 15 15 15 S Ru ✓ ✓ 15 750/15 Ir ✓ 450 500 500 500 450 500 550 550 N 3) N 3) N 3) N 3) L 3) L 3) N 3) L Zn 800 800 800 800 800 800 800 800 800 800 800 800 800 800 550 S S S S S S S S S In 800 1010 4) 1010 4) 1010 4) 1010 3) S 750/5 750/10 800/5 800/15 750/15 – 900/15 700/15 Cu Working temp. Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold Lot Herador / Maingold PF Lot Herador / Maingold PF Lot Herador / Maingold Lot 4) Herador PF Lot Herador PF Lot Herador PF Lot Herador PF Lot – Herador PF Lot Herador PF Lot Herador PF Lot Herador PF Lot Herador PF Lot Herador Lot Herador Lot – Herador Lot 3) 700/10 Pd Use Herador / Maingold PF Lot (PF) 1040 1060 S Bio eram Plus Bio Herador SG Bio Herador CN Bio Herador N Bio Herador GG Bio Herador MP Herador EC Herador MP Herador PF Herador C Herador S Herador G Herador GG Herador H Heralight universal MainbondSun AureaSun 1,2,3,4,5,14 universal s universal universal v/k 4 ,3 Pt ø 0,3 mm x 200 mm Universal Alloys, Ceramic Bonding Alloys acc. to EN ISO 22674 and 9693-1 HeranormSun Ag Melting range Solders for Ceramic Bonding Alloys 3) S Content in mass % Colour Flux** Laser welding wire Work. temp.*˚C / ­ ø 0,5 mm x 200 mm solder colour Solder Page 5: Composition and Technical Data of Solders according to EN ISO 9333 Alloy also available as Others Ceramic Bonding Alloys acc. to EN ISO 9693-1 and 22674 Implant Bio Supra eram Hardening high gold content 0197 Melting range Page 4: Use of Solders   Laser welding wires reduced gold Colour Page 3: Ceramic Firing Pdbased D Type Page 2: Technical Data, Melting and Casting Heraenium CE Stahlgold Lot 750 Stahlgold Lot 910 7) Heraenium EH Stahlgold Lot 750 Stahlgold Lot 910 Heraenium Laser Stahlgold Lot 750 Stahlgold Lot 910 7) *Notes: See legend use of solders 8) 2) 1180 8) 1180 Stahlgold Lot 750 Stahlgold Lot 750 * * CoCr Laser welding wire 2) CoCr Laser welding wire – – 8) Stahlgold Lot 750 Stahlgold Lot 750 * * – – – – 1150 8) 1150 8) 1185 8) * Stahlgold Lot 750 – 2) – 2) – * CoCr Laser welding wire – CoCr Laser welding wire 2) – HeraeniumSun Lot 1 2) – CoCr Laser welding wire 65,3 – – CoCr Laser welding wire 8) – – CoCr Laser welding wire * 1/A Working temp. °C Use Co 27,1 8) * Use Working temp. °C 1040 1180 *Notes: See legend Composition and Technical Data of Solders according to EN ISO 9333 Precious Metal Wire acc. EN ISO 22674 Legend to page 1: Composition Application Remarks 2 1 4 3 5 10 6 9 10 11 14 Cast on alloy Cast posts Crown rings Can be veneered with high expansion, low fusing ceramics 15 Implant restorations 16 Galvano double crowns (Primary crowns) 17 Galvano double crowns (Secoundary crowns and bars) 1 2 3 4 5 6 7 Inlays, cervical restorations MOD Inlays Crowns Bridges Milling technique Partial dentures Optimizing bonding & aesthetics 8 Gold plating 15 x = Mass content < 0,1 Mass % A) = A stable framework design with reinforced connections with a cross-section of 8 – 10 mm2 is required for long span bridges and suprastructures. Additionally, the frameworks need to be hardened. B) = Depending on the copper and/or silver content, in some cases discoloration of double crowns may result after short period of wearing. Discoloration, however, is technically and physiologically harmless. C) = In exceptional cases these alloys can also be used for traditional telescopic crowns with parallel walls and for the bar casting technique provided that cross-sections for crown walls, approximal areas, bars and laser welded joints are particularly thick and the alloy is hardened subsequently. No indication for conical crowns and shear distributors. D) = Type classification acc. EN ISO 22674 17 16 Colour of alloy = = = = white pale yellow yellow rich yellow Type 0 1 2 3 4 5 w k v s = = = = 0,2% Yield strength Rp0 (MPa) minimum – 80 180 270 360 500 Elongation (%) minimum – 18 10 5 2 2 Young’s modul (GPa) minimum – – – – – 150 Remarks In case of hypersensitivity (allergies) to one of the constituents of the alloy. w = After soft annealing and quenching k = Bonding alloy: condition after ceramic firing v = Condition after hardening s = Self-hardening alloy, after slow cooling in the mould Side effects In individual cases hypersensitivity reactions (allergies) or electrochemically conditioned, local malsensations were reported. 1) Acc. to EN ISO 22674 2) 1 MPa = 1 N/mm², 1 GPa = 1000 N/mm² 3) When veneered with ceramics, these alloys do not require any additional hardening process to provide their max. physical values. 4) Normally, the pre-heating temperature shall be 900 °C. In case of form filling problems with thin copings we recommend to raise the pre-heating temperature to 950 °C. 5) For cast-on technique. Interactions with other dental alloys Melting Crucible With approximal or antagonist contact with dentures of different alloys galvanic effects may occur. Other materials must be used instead if contact with other alloys causes persistent local paraesthesia on an electrochemical basis. G = Graphite C = Ceramic Ceramic-NPM = Ceramic crucibles for non precious metal alloys Type D) Maingold NO Remarks Cooling after Ceramic Firing (from first dentine firing until and including glaze firing) 1) When veneering with ceramics with higher firing temperature, oxide firing must be carried out at the highest ceramic firing temperature; max. temperature of 950 °C must not be exceeded. 2) Oxide firing: Please follow the instructions of the ceramic manufacturer. 3) Follow the instructions of the ceramic manufacturer. 4) Hardening prior to firing (conditioning for milling techniques): 930 °C, 15 min, rapid cooling. 5) When veneered with ceramics, these alloys do not require any additional hardening process to provide their maximum physical values. 6) 25 – 500 °C acc. EN ISO 9693 f = Rapid cooling At the end of the program the firing platform is completely and firing tray with objects is removed immediately. The firing tray can cool next to the furnace on a fire-resistant tray. n = Normal cooling (Stress relief cooling) The firing platform is driven down at the end of the program and the firing tray is left in the radiated heat for 2 – 3 minutes before it is removed. s = Slow cooling Depending on programming of the furnace either slow cooling to the initial temperature can be performed for approx. 4 – 6 minutes or a tempering phase of 3 – 5 minutes can be set at approx. 800 °C (high-melting alloys) resp. at approx. 700 °C (low-melting alloys). Rapid cooling can always be performed for oxide and opaque firings. * = Relaxation cooling is recommended for lang span, bulky frameworks Treatment of the framework surface after oxide firing = Pickling in Hera AM 99 ca. 70 °C / 10 min. = Sandblasting with 125µm Aluminium Oxide Content in mass % Application Au Ag Pt Pd Cu Ir Ru Others 73,0 19,4 5,0 2,6 – – – – 1 9,11 4 13 70,0 12,5 7,0 0,4 10,0 0,1 – – 3/4 9 61,0 – 23,8 15,0 – – – 0,2 Rh Maingold O Heraplat Notes: See legend composition Technical Data 1) Preheating Melting range Solidus Liquidus Temperature ˚C ˚C ˚C Maingold NO 1100 1170 750 Maingold O 890 970 Heraplat 1360 1460 Density 1) 1) Hardness 0,2% Yield strength HV5 MPa 1) Elongation 2) % g/cm³ w/k v w/k v w/k v 16,5 60 – 110 – 34 – – 15,7 180 285 430 740 26 10 750 18,0 135 250 350 780 24 15 5) Notes: See legend technical data, melting and casting Dental alloys Table of Technical Data. Edition 03/2013 Ceramic Firing Oxide Firing/Soft Annealing Hardening ˚C min ˚C min 800 2 – – Maingold O 750 2 400 15 Heraplat 1100 2 700 30 Maingold NO Legend to page 3: Ceramic Firing Colour 0197 After soft annealing and quenching Bonding alloy: condition after ceramic firing Condition after hardening Self-hardening alloy, after slow cooling in the mould Legend to page 2: Technical Data, Melting and Casting Contraindications Composition Prior to Ceramic Firing After Ceramic Firing Alloy also available as Flux** Working temperature ˚C* Solder Solder Working temp.* ˚C Maingold NO Maingold Lot 850 Herador / Maingold Lot 800 Maingold / Hera Lot 750 * Maingold O Maingold Lot 850 Herador / Maingold Lot 800 Maingold / Hera Lot 750 * Heraplat Solder for casting alloy used Legend to page 5: Competition and Technical Data of Solders according to EN ISO 9333 1 = Primary Solder x = Mass Content < 0.1 % B = After Ceramic Firing 2 = Secondary Solder !! = Attention! Contains Nickel! = = = The actual Instructions for use for HeraCeram and for HeraCeramSun are applicable. white pale yellow yellow Alba , Albabond , AlbaSun , AureaSun , BioCeramPlus , BioSupraCeram , Hera , Heraenium , Herabond , HeraCeram , Herador , Heraloy , HeranormSun , HeraSun , Mainbond , MainbondSun , Maingold , Preciano = registered trademarks of Heraeus Kulzer Aurea = Trade Name ® ® ® ® ® ® ® ® ® ® Profile Dimensions in mm Maingold NO ● 0,3 / 0,45 Maingold O ● 0,7 / 0,8 / 0,9 / 1,0 / 1,1 / 1,2 / 1,5 / 1,8 / 2,0 Maingold O ◗ 0,75 x 1,5 / 0,9 x 1,8 ® ® The alloys of our current delivery program are listed in this table of technical data. Further alloys can be supplied on request. ® ® Contact in Austria & Swiss Heraeus Kulzer Austria GmbH Nordbahnstr. 36/2/4/Top 4.5 1020 Vienna Phone +43 1 408 09 41 Fax +43 1 408 09 41-75 [email protected] www.heraeus-kulzer.at www.heraeus-kulzer.ch ø 0,3 mm } ø 0,5 mm Wire from regular supply or 3) ® ® ® In compliance with the European guideline 93/42/EWG our medical devices are CE-marked according to the classifications. 1,1 x 1,65 0,7 / 0,8 / 1,0 / 1,2 / 1,3 / 1,5 / 1,8 / 2,0 ● Precious Metal Special Materials / Electroforming Precious metal special material Colour of solders ® Wire Heraplat A = Prior to Ceramic Firing Contact in Japan Heraeus Kulzer Japan Co., Ltd. 8-13 Hongo 4-chome Bunkyo-ku, Tokyo 113-0033 Phone +81 35803 21-51 Fax +81 35803 21-50 [email protected] www.heraeus-kulzer.co.jp 66034837 GB 12.13 ORT/Reuffurth white pale yellow yellow Maingold O Annotation Contact in de Benelux Heraeus Kulzer Benelux B.V. Postbus 986 NL-2031 RZ Haarlem Phone +31 23 543 42-50 Fax +31 23 543 42-55 [email protected] www.heraeus-kulzer.nl www.heraeus-kulzer.be Wire Presentation Colour of solders = = = Contact in Scandinavia and in the Baltic States Heraeus Kulzer Nordic AB Hammarbacken 4B SE-191 49 Sollentuna Phone +46 8585 777 55 Fax +46 8623 14 13 [email protected] www.heraeus-kulzer.se Contact in Germany Heraeus Kulzer GmbH Grüner Weg 11 63450 Hanau (Germany) Phone 0800 43 72-522 Fax 0800 43 72 329 [email protected] www.heraeus-kulzer.de Laser welding wire Legend to page 4: Use of Solders / Laser Welding Wires * The working temperature is part of the solder’s name. ** Recommended flux: Precious metal / precious metal: Hera UL 99 Precious metal / non precious metal: Hera SLP 99 Non precious metal / non precious metal: Hera SLP 99 1) Herador Lot V800 must be soldered under vacuum. Graphite firing trays should be used. 2) Recommended alternative alloy. 3) Carbon free laser welding wire ø 0.5 mm. 4) Use appropriate precious metal casting alloy. 5) When processed with HeraCeram. 6) Accurate temperature control must be ensured. 740 °C must not be exceeded. Maximum heat-rate: 55 °C / min. 7) When soldering high palladium content alloys onto CoCr castings prepare solder surfaces using Herador Lot 1060. Then solder with Stahlgold Lot 750. 8) Soldering by open flame. Contact in Australia Heraeus Dental Australia Pty. Ltd. PO Box 40 North Ryde BC NSW 1670 Toll Free: 1800 226 521 Phone: +61 2 8422 6100 Fax: +61 2 9888 1460 [email protected] www.heraeus-kulzer.com Use of Solders Notes: See legend use of solders Remarks Contact in United Kingdom Heraeus Kulzer Ltd. Heraeus House, Albert Road Northbrook Street, Newbury Berkshire, RG14 1DL Phone +44 1635 30 500 Fax +44 1635 52 46 22 [email protected] www.heraeus-kulzer.com D) Type Indication Application Presentation Components after utilization Preciano Bio Goldbath universal 0 1,2,3,17 Gold electrolyte 16,0 g Au/I Fine gold Blendgold Neu – 7 Precious metal paste + ceramic 4,8 g syringe Fine gold + ceramic particles Blendgold Spezial – 8 Precious metal paste 4,0 g syringe Fine gold Notes: See Legend Composition Giving a Hand to oral health. *Notes: See legend www.heraeus-kulzer.com