Transcript
dermalogica protocols for hand and stone workbook
Text copyright © by Dermalogica®. No part of this text may be reproduced in any way without written permission from Dermalogica®. 030917
meet dermalogica For more than 30 years, we have redefined professional excellence in the skin care industry. Instead of teaching "beauty school" to "beauticians," we teach skin health to skin therapists, offering the most challenging and rewarding postgraduate skin and body therapy curriculum in the world. We believe in skin health, not beauty. Dermalogica launched in 1986, a time when neon reigned, hair was big and beauty was more important than skin health. While snazzy, frilly products acted more as trendy accessories than tools for skin health, Dermalogica delivered innovation through real research, real ingredients and real results. Today, Dermalogica still turns heads for innovative products and treatments that work, and our customers turn heads for skin health that goes farther than skin deep. We believe professional skin care is not a luxury. To us, skin care is part of daily health — like brushing your teeth! That's why we believe so much in the power of professional skin therapists to change how people value and care for their skin. Since Jane Wurwand — herself a professional skin therapist — founded Dermalogica, our mission has been to bring respect and success to professional skin therapists through excellent education, innovative products and outstanding customer service. Everything we do is done to help you be the best, most successful and most influential skin therapist you can be. We believe in setting the standard. Dermalogica is the #1 choice of skin care professionals worldwide. To date, we have won more than 300 awards for our revolutionary products and treatments, all researched and developed by The International Dermal Institute (IDI). As a student, you're not only working with these products and treatments, you're learning the best, from the best, with access to more than 40 IDI classes and industry-leading experts! Along with IDI, Dermalogica is the driving force behind more than 90 training centers, including our unique Immersive Learning Centers at select locations. 2
why dermalogica?
Dermalogica is all about skin health and achieving results
Known as the #1 choice brand for professional skin therapists worldwide, over 100,000 professional skin therapist use Dermalogica ®
Customized product prescriptions through our Face Mapping skin analysis concept
Rigorous research and development with every product
Education on products and proper usage through our Skin Bar concept
®
3
Good retailers know their value and believe in themselves and what they do. It’s hard to sell authentically if you don’t fully believe in the value of what you are selling. Remember, if your business carries retail product, you are retailing. To help structure your approach, follow the H.A.P.P.Y retailing format.
a structure for easy conversations
hello – the all-important greeting that opens conversation and creates the first impression
ask – getting to know your customer and their skin without intimidating them
play – exploring and experiencing products and solutions with the customer
prescribe – summarizing the product solutions
your follow up – cementing the relationship
4
hello While it sounds easy, saying “hello” can set the tone for the whole relationship. The customer will decide within the first 30 seconds whether they like you and trust you! The important elements of engaging with customers on a friendly and non-threatening way include:
the elevator pitch 1. Focus on what your clients gain from your services 2. Highlight the need for what you do 3. Then share what you do, use personal stories and differentiate yourself from the competition! My elevator pitch:
ask This is about building trust that can lead to an ongoing relationship. It is ALL about them, the customer—not you. Take the time to listen to your customers and they will feel more valued. Actively LISTEN to them and do not bombard them with unnecessary information. The more you discover, the better you can fulfill their skin needs.
What should you ask? Q.
Tell me about your skin: like/dislike?
Q.
What is your priority skin concern?
Q.
What is a typical day for you?
Q.
Tell me about your skin care routine…
5
play This segment gives the customer a chance to explore and establish preferences in smell, feel and type of product. Remember to make the interaction client centric. Use your questions or use PLAY to focus on the client’s concerns and preferences. KEEP IT SIMPLE!
Questions you can ask: Q.
How does that smell?
Q.
How does that feel?
Q.
This is how you use it…
prescribe Prescribe is where we bring everything together and where the customer makes a purchase. Summarize the product recommendations and discussion for them. If cost is an issue, don’t justify the price. Just narrow down to two or one priority products and sample the others. Always ensure that you have offered solutions to their key concerns.
Questions you can ask: Q.
How does that sound?
6
your follow up It is critical at this stage that you have a plan to follow up with the client to reinforce the relationship and keep them coming back to you again and again. The HAPPY process is not complete until you have your second contact and are connected in regular communication. Ask for their preferred method of contact: email, text, phone call, etc.
Questions you can ask: Q.
I would like to check in with you in four weeks? When is a good time for you to pop in?
Q.
We would like to add you to our loyalty program and keep you up to date, can we take some details?
Q.
Would you like to connect with us on…?
7
dermalogica treatment protocols
8
dermalogica teen facial (50 minutes) 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (4 minutes) Begin by adding steam. If you choose Clearing Skin Wash, which is ideal for oily, acne skin, add water to a dime size amount and foam up cleanser. Or choose Special Cleansing Gel, which is ideal for normal to combination skin. Add water and use a dime size amount to foam up cleanser.
5.
Degrease by applying one pump of Post Extraction Solution (As an option: dispense 2 pumps of Daily Resurfacer to degrease the skin.) Explain your findings to the client while completing the Face Mapping® skin analysis (2 minutes) – look for areas of breakouts and congestion.
6.
Exfoliate by first applying steam, then choose Skin Prep Scrub, which is ideal for congested, non-inflamed lesions. Mix a dime size amount with a dime size amount of Special Cleansing Gel. Lightly work around skin, removing with sponges or a warm steam towel. Or choose Skin Exfoliant System, created for oily, acne conditions. Add 1 scoop of part A Enzymatic Base with 1 teaspoon of Part B Acid Activator. Mix to a smooth creamy paste and apply all over with a fan brush. Leave on for 10 minutes, then remove with a warm steam towel. Another choice is Daily Microfoliant®, formulated for normal and sensitive skin. Mix ½ tsp. with ½ tsp. of water, foaming in hands, or use a small bowl and fan brush. Remove with sponges or warm steam towel. (12 minutes total – 10 minutes for exfoliation, 2 minutes for removal)
7.
Extractions - Prepare for extractions by dispensing a quarter of a teaspoon of Scaling Fluid into a small dish and foam with a dry fan brush. Apply under steam for 10 minutes prior to extractions only on areas that need extracting. Skin may turn pink. This is a normal side effect. Perform extractions, then rinse any residual scaling fluid off skin. Next, apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to affected areas. (15 minutes. Scaling Fluid 10 minutes, extractions 5 minutes)
8.
Masque (12 minutes TOTAL – 2 minutes for application – 10 minutes on the skin). Choose Colloidal Masque Base for dehydrated skin and apply 1 tablespoon using a fan brush. You may spread over eyes and lips. Or, apply 1 tablespoon of Plankton Masque Base, which is for congested or break out prone skin, using a fan brush to cover face and neck, avoiding eye area. *Both masques may be used in different zones. Then, Massage neck and shoulders for 10 minutes during masque. Use recommended massage product or Dermalogica Massage Cream as an option. Remove masque and massage medium with steam towel.
9.
Toner (1 minute) Spritz Multi-Active Toner over the entire face and neck evenly.
10.
Moisturizers (1 minute) Using a dime size amount of Active Moist, apply to face and neck.
11.
Solar Defense (1 minute) You may mix a dime size amount of Solar Defense Booster SPF50 into Active Moist for daylight protection. Skin Perfect Primer SPF30 can be layered over moisturizer as an option.
12.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
9
dermalogica classic/men’s facial (50 minutes) 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (5 minutes) add steam UltraCalmingTM Cleanser (Ideal for sensitive.) Use a dime size amount. Add water and emulsify. Special Cleansing Gel (Ideal for normal to combination) Use a dime size amount. Add water to foam up cleanser.
5.
Face Mapping® skin analysis (4 minutes) – Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping® skin analysis.
6.
Exfoliate (8 minutes total: 6-7 minutes for exfoliation, 2 minutes for removal) Skin Prep Scrub – (normal to oily with ingrown hair) mix a dime size amount with a dime size amount of Special Cleansing Gel. Lightly work around skin and remove with sponges or warm steam towel. Or choose Daily Microfoliant® - (normal to sensitive) ½ tsp. mixed with ½ tsp. of water. Foam in hands, or use a small bowl and fan brush to foam. Remove with sponges or warm steam towel.
7.
Extractions (15 minutes: Scaling Fluid 10 minutes, extractions 5 minutes) Scaling Fluid – Dispense quarter of a teaspoon amount into a small dish and foam with a dry fan brush. Apply under steam for 10 min prior to extractions only on areas that need extracting. Skin may turn pink. This is a normal side effect. Perform extractions, then rinse any residual scaling fluid off skin. Then apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to affected areas.
8.
Masque (12 minutes total: 2 minutes for application, 10 minutes on the skin) Colloidal Masque Base (dehydrated skin) Apply 1 tablespoon to skin using fan brush. Can spread over eyes and lips. Plankton Masque Base (congested, break out prone skin) Apply one tablespoon to skin using fan brush to cover face and neck, avoiding eye area. * both masques may be used in different zone. Then, Massage neck and shoulders for 10 minutes during masque. Use recommended massage product or Dermalogica Massage Cream as an option. Remove masque and massage medium with steam towel.
9.
Toner (1 minute) Multi-Active Toner (spritz over the entire face and neck evenly)
10.
Moisturizers (1 minute) Active Moist (use a dime size amount and apply to face and neck)
11.
Solar Defense (1 minute) Solar Defense Booster SPF50 (can mix a dime size amount into Active Moist for daylight protection)
12.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time, even if the exfoliant you have chosen would be considered mild.
10
dermalogica detox facial (50 minutes) 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (2 minutes) add steam Clearing Skin Wash (Ideal for oily, acne) Use a dime size amount. Add water and foam up cleanser. Or choose Special Cleansing Gel (Ideal for normal to combination) Use a dime size amount. Add water and foam up cleanser.
5.
Face Mapping® skin analysis (3 minutes) - Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping skin analysis.
6.
Exfoliate (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal) - Daily Microfoliant® - (normal to sensitive) ½ tsp. mixed with ½ tsp. of water. Foam in hands, or use a small bowl and fan brush to foam. Add 1 pump of Exfoliant Accelerator 35 and mix. Remove with sponges or warm steam towel. Or - Skin Exfoliant System - (oily, acne) 1 scoop of part A Enzymatic Base with 1 teaspoon of Part B Acid Activator. Mix to a smooth creamy paste. Add 3 pumps of Exfoliant Accelerator 35 and mix. Apply to the face (avoiding the eyes) and leave on 10 minutes. Steam can be used if strong sensations are felt. Remove with warm steam towel.
7.
Extractions (15 minutes: Scaling Fluid 10 minutes, extractions 5 minutes) Dispense quarter of a teaspoon of Scaling Fluid into a small dish and foam with a dry fan brush. Apply under steam for 10 minutes prior to extractions only on areas that need extracting. Skin may turn pink. This is a normal side effect. Perform extractions, then rinse any residual Scaling Fluid off skin. Next apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to affected areas.
8.
Masque (12 minutes total: 2 minutes for application, 10 minutes on the skin) Apply Sebum Clearing Masque to face and neck. Then, massage neck and shoulders for 10 minutes during masque. Use recommended massage product or Dermalogica Massage Cream as an option. Remove masque and massage medium with steam towel.
9.
Complex (1 minute) - Medibac Clearing® Complex (apply 6-10 drops to the entire face focusing on areas of breakouts and oily skin)
10.
Toner (1 minute) - Multi-Active Toner (spritz over the entire face and neck evenly)
11.
Moisturize (1 minute) - Active Moist (normal to oily) Apply a dime size amount and apply to face and neck. Skin Smoothing Cream (normal to dry) Apply a dime size amount and apply to face and neck.
12.
Solar Defense (1 minute) Solar Defense Booster SPF50 (can mix a dime size amount into Active Moist or Skin Smoothing Cream for daylight protection).
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation, under no circumstances should you leave your client unattended in the treatment room at any time, even if the exfoliant you have chosen would be considered mild.
11
dermalogica sensitive facial (50 minutes) ®
1.
Face Mapping skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (4 minutes) add steam if the client is not extremely irritated. TM UltraCalming Cleanser (use a dime size amount. Add water and emulsify)
5.
Face Mapping® skin analysis (5 minutes) – explain your finding to client while completing the Face Mapping® skin analysis.
6.
Exfoliate (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal) Daily Microfoliant® - normal to sensitive (½ tsp. mixed with ½ tsp. of water. Foam in hands, or use a small bowl and fan masque brush to foam. May reduce exfoliation time for overly sensitive or sensitized skin. Remove with sponges or warm steam towel.)
7.
Masque (13 minutes, 3 minutes for application and removal) TM UltraCalming Complex - apply 6-10 drops to face and neck and perform a pressure point massage. Clinical Colloidal Oatmeal Masque (mix 1 scoop with warm water to form a smooth consistency and apply to the skin with a fan brush). Steam is needed for this treatment to keep the masque moist. Ensure steam is kept far enough distance so that the steam is cool when it contacts the skin.
8.
Massage for 10 minutes - begin neck and shoulders during masque. Use recommended massage product or Dermalogica Massage Cream as an option. Remove masque and massage medium with steam towel.
9.
Toner (1 minute) TM UltraCalming Mist (spritz over the entire face and neck evenly)
10.
Solar Defense (1 minute) Solar Defense Booster SPF50 (can mix a dime size amount into Active Moist or Skin Smoothing Cream if more hydration is needed)
11.
Moisturize (2 minutes) Barrier Repair, apply a dime size amount first to face and neck.
12.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time, even if the exfoliant you have chosen would be considered mild.
12
dermalogica rejuvenating facial (50 minutes) 1.
Face Mapping® skin analysis consultation card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second cleanse (1 minute) add steam. Use a dime size amount of Skin Resurfacing Cleanser. Add water and emulsify.
5.
Face Mapping® skin analysis (3 minutes) Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping® skin analysis.
6.
Exfoliate and apply steam (10 minutes total for exfoliation and removal). Apply one tube of MultiVitamin Power Exfoliant to face and neck. (This is an excellent option for brightening and resurfacing. 3 minutes for normal /up to 7 minutes for coarse skin. Steam will intensify exfoliation effects, so use steam for those with a higher tolerance.) Remove excess with damp sponges then perform condensed double cleanse beginning with PreCleanse and followed by Special Cleansing Gel. a. Option: upgrade by using Daily Superfoliant instead of MultiVitamin Power Exfoliant.
7.
Extractions (10 minutes total: Scaling Fluid for 5 minutes, Extractions 5 minutes) Dispense quarter of a teaspoon amount into a small dish and foam with a dry fan brush. Apply only to areas to be extracted. Steam for 5 minutes. Skin may turn pink, which is a normal side effect. Blot excess Scaling Fluid with dry tissue prior to performing extractions. Rinse any residual Scaling Fluid off skin after extractions. Apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to extracted areas.
8.
Apply 6-10 drops of Revitalizing Additive to face and neck. Perform freestyle Massage (10 minutes) Massage face, neck and shoulders with recommended massage cream or Dermalogica’s Massage Cream. Remove with warm steam towel. Removal (1 minute).
9.
Masque (10 minutes total for application, rest time on skin and removal). Apply 6-10 drops of AGE Smart® Complex followed by 1 tablespoon MultiVitamin Power Recovery® Masque with a fan brush to face and neck. Then, Massage neck and shoulders for 10 minutes during masque. Use recommended massage product or Dermalogica Massage Cream as an option. Remove masque and massage medium with steam towel. Remove with a warm steam towel.
10.
Tone (1 minute) by spritzing Antioxidant Hydramist over entire face and neck evenly.
11.
Moisturize and Eye Treatment (1 minute) with a small amount of MultiVitamin Power Firm applied around the eye and lip area.
12.
Follow by applying a dime sized amount of Dynamic Skin Recovery SPF50 to the face and neck or Skin Smoothing Cream if it is after daylight hours. You may also layer SkinPerfect Primer SFP30 over chosen moisturizer. (1 minute)
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation, under no circumstances should you leave your client unattended in the treatment room at any time, even if the exfoliant you have chosen would be considered mild.
13
dermalogica hydrating facial (50 minutes) 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (2 minutes) ADD STEAM UltraCalmingTM Cleanser Use a dime size amount. Add water and foam up cleanser. Or choose to add water to a dime size amount of Special Cleansing Gel and foam up cleanser.
5.
Face Mapping® skin analysis (3 minutes) – (optional: dispense 2 pumps of Daily Resurfacer to degrease the skin). Perform Face Mapping®, explaining your findings. Look for areas of dehydration and areas of concern.
6.
Exfoliate - apply steam (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal) Daily Microfoliant® - mix ½ teaspoon and 1 pump of Exfoliant Accelerator 35 in a cup. Apply using a fan brush. Lightly work around skin and remove with sponges or warm steam towel.
7.
Extractions (15 minutes total: Scaling Fluid 10 minutes, extractions 5 minutes) Scaling Fluid - Dispense quarter of a teaspoon amount into a small dish and foam with a dry fan brush. Apply under steam for 10 minutes prior to extractions only on areas that need extracting. Skin may turn pink. This is a normal side effect. Perform extractions, then rinse any residual scaling fluid off skin. Then apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to areas extractions were performed.
8.
Masque (12 minutes total: 2 minutes for application, 10 minutes on the skin) Apply 6-10 drops of UltraCalming Complex follow by Colloidal Masque Base - (dehydrated skin). Apply 1 tablespoon to the skin using a fan brush. Can spread over eyes and lips. Clinical Colloidal Oatmeal Masque - Mix 1 scoop in a cup with warm water to a smooth consistency. Layer over Colloidal Masque Base using a fan brush (may include eye area). Then, massage neck and shoulders for 10 minutes during masque. Use recommended massage product or Dermalogica Massage Cream as an option. Remove masque and massage medium with steam towel. Remove with a warm steam towel.
9.
Spritz with Antioxidant HydraMist (1 minute)
10.
Apply MultiVitamin Power Firm to eye and lip area. (1 minute)
11.
Moisturize (1 minute) Apply Dynamic Skin Recovery SPF 50 (apply a dime size amount and apply to face and neck) Or choose Skin Smoothing Cream. SkinPerfect Primer SPF30 is an additional option layered over moisturizer.
12.
Daylight Defense (1 minute) Apply sun protection using Solar Defense Booster SPF50 if moisturizer of choice does not contain sun protection.
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation, under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
14
dermalogica professional treatment for microdermabrasion
Dermalogica treatments using microdermabrasion: For a professional Dermalogica treatment center that offers microdermabrasion as a method of exfoliation, it is important to: • • •
Use Dermalogica professional products that are suitable for the patient/client’s current skin condition. Check skin condition ensuring there are no contraindications to treatment. Develop a treatment plan or series based upon skin condition and turgor. – Many skin treatment centers offer this treatment in conjunction with MultiVitamin Power Exfoliant treatments. You would alternate between microdermabrasion and MultiVitamin Power Exfoliant. Dermalogica advises against performing both methods of exfoliation in one treatment as that would be double exfoliation. Courses may be performed prior to and/or post microdermabrasion for improved skin regeneration benefits.
Note: when using any type of professional exfoliation, under no circumstances should you leave the patient/client unattended in the treatment room. Monitor for excessive redness and remove the product immediately as directed if a reaction occurs. This treatment should take 45 min to complete, but could be made into a 60 minute treatment if massage and masque is incorporated. During the 6 week series the patient/client can further prepare the skin using Skin Resurfacing Cleanser, Daily Microfoliant®, prescribed booster or treatment product.
15
microdermabrasion dermalogica product recommendations
professional products PreCleanse followed by UltraCalmingTM Cleanser will help to calm the skin and diminish sensitivity prior to the treatment. Face Mapping® skin analysis should be introduced to make sure the skin is suitable for the microdermabrasion procedure. Perform microdermabrasion routine. Use UltraCalmingTM Complex to calm skin post microdermabrasion procedure. UltraCalmingTM Complex may be used for a pressure point style massage.
UltraCalmingTM Complex may be applied under Clinical Colloidal Oatmeal Masque for devitalized skins that do not look overly sensitized. Clinical Colloidal Oatmeal can be used to reduce redness, de-sensitize, hydrate and soothe. MultiVitamin Power Recovery® Masque will reduce inflammation, irritation and sensitivity. Spritz with UltraCalmingTM Mist. If the skin still looks dehydrated, followed by Skin Smoothing Cream or Barrier Repair and Solar Defense Booster SPF50 to protect the skin.
retail products You may also take advantage of Dermalogica’s technology by prescribing certain home care products to your clients. The client will need soothing and calming preparations that address redness and possible slight irritation as well as help repair the barrier function of the skin. The skin needs to be treated the same way as any skin that has undergone a form of trauma. An excellent cleanser to use for pre and post microdermabrasion treatments is UltraCalmingTM Cleanser. UltraCalmingTM Mist can be used to reduce redness and repair the barrier function. Barrier Repair may be used alone for a sensitized skin or applied on top of Skin Smoothing Cream to increase hydration and protect from environmental damage. MultiVitamin Power Firm for the eye area will ensure maximum delivery of vitamins and firming algae extracts. MultiVitamin Power Recovery® Masque is a powerful anti-inflammatory masque that also aids in the reduction of redness and hypersensitivity. Solar Defense Booster SPF50 is imperative to protect the skin post-exfoliation treatments. Alternatively, Dynamic Skin Recovery SPF50 can be used for those who do not have sensitivity.
16
micrdermabrasion (50 minutes) 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (2 minutes) ADD STEAM Dispense a dime size amount of Special Cleansing Gel. Add water and foam up cleanser.
5.
Face Mapping® skin analysis (3 minutes) – (optional: dispense 2 pumps of Daily Resurfacer to degrease the skin). Perform Face Mapping®, explaining your findings. Look for areas of dehydration and areas of concern.
6.
Exfoliate – (15 minutes total) perform microdermabrasion per manufacturer’s recommendations.
7.
Thoroughly remove any leftover residue with a warm steam towel customized with the appropriate Botanical mixer. A cleanse off with PreCleanse and/or Special Cleansing Gel may be used if needed. (2 minutes)
8.
Extractions (10 minutes) Perform extractions, cautioning if sensitivity is present. Then apply 2 pumps of Post Extraction Solution to a dry piece of cotton and only apply to areas extractions were performed.
9.
Spritz with UltraCalmingTM Mist to calm skin post procedure. (1 minute)
10.
Masque (12 minutes total: 2 minutes for application, 10 minutes on the skin) Apply 6-10 drops of UltraCalmingTM Complex followed by Clinical Colloidal Oatmeal Masque to reduce redness, de-sensitize, hydrate and soothe. Mix 1 scoop in a cup with warm water to a smooth consistency, and apply with fan brush (may include eye and lip area). Or MultiVitamin Power Recovery® Masque to hydrate, regenerate, and as an antioxidant. Apply 1 tablespoon to the skin using a fan brush. Then Massage neck and shoulders for 10 minutes during masque. Use recommended massage product or Dermalogica Massage Cream as an option. Remove masque and massage medium with steam towel. Remove with a warm steam towel.
11.
Spritz with UltraCalmingTM Mist to calm skin post microdermabrasion procedure. (1 minute)
12.
Apply MultiVitamin Power Firm to eye and lip area. (1 minute)
13.
Moisturize (1 minute) (Optional) Apply UltraCalmingTM Serum Concentrate to reduce irritation or any redness. Apply the appropriate Dermalogica Moisturizer and follow with Barrier Repair. Layer on Solar Defense SPF50 to protect the skin if daytime treatment. Skin Perfect Primer SPF30 is also an option.
14.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation, under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild
17
dermalogica microcurrent protocol with NuFACE
®
Text copyright © by Dermalogica . No part of this text may be reproduced in any way without written permission ® from Dermalogica . 030917
18
Instructions for using NuFACE Trinity Facial Trainer and ELE attachments Follow these steps for Basic Treatment Glides and Advanced Treatment Holds. This protocol is for stimulating larger surface areas of the face such as the jawline, cheekbones, forehead and smoothing the eye and lip area. The instructions below are designed to provide the most effective results when followed correctly. 1.
Remove the device from the charging cradle, and turn it on by pressing the ON/OFF button. An ascending audible beep is emitted notifying you that your device is on.
2.
Adjust the intensity level to your client’s comfort by pressing the intensity control buttons on the front of the device, either up (+) or down (-). As intensity increases or decreases the number of blue lights will change: all five blue lights will be illuminated at maximum intensity, only one blue light will be illuminated at minimum intensity. It is normal to not feel any sensation when using the device.
3.
Place the attachment in direct contact over the areas to be treated. Always keep both probes on the face at the same time and glide or hold with medium pressure. The device emits a beep every five (5) seconds to indicate when to move to the next treatment position. (This beep will change to two (2) low tones when the battery needs recharging.) Note: The Facial Trainer and ELE attachments will not contract the muscles. The current is soft, soothing and mild when used correctly. a. b.
Do not allow the applied toner, concentrate, or masque to dry during treatment. Reactivate by applying additional product to the treatment area(s). Turn off the device after every treatment. A descending audible beep is emitted notifying you that your device is turning off.
Directions of use: Lift one side of the face at a time. Glide or hold spheres in the pattern as shown until BEEP sounds. Move to the next position, complete each sequence 3 times for each area. Do not place spheres directly on the eyelids.
19
dermalogica classic/men’s facial with NuFACE 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (4 minutes) add steam Use a dime size amount of UltraCalmingTM Cleanser (Ideal for sensitive). Add water and emulsify. Or use a dime size amount of Special Cleansing Gel (Ideal for normal to combination). Add water to foam up cleanser.
5.
Face Mapping® skin analysis (4 minutes) - Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping® skin analysis. Ensure the client is not contraindicated to microcurrent procedure.
6.
Exfoliate (8 minutes total: 6-7 minutes for exfoliation, 2 minutes for removal) Skin Prep Scrub - normal to oily with ingrown hair (mix a dime size amount with a dime size amount of Special Cleansing Gel. Lightly work around skin and remove with sponges or warm steam towel.) Or use Daily Microfoliant® - normal to sensitive (½ tsp. mixed with ½ tsp. of water. Foam in hands, or use a small bowl and fan brush to foam. Remove with sponges or warm steam towel.
7.
Extractions (15 minutes: Scaling Fluid 10 minutes, extractions 5 minutes) Scaling Fluid - Dispense quarter of a teaspoon amount into a small dish and foam with a dry fan brush. Apply under steam for 10 minutes prior to extractions only on areas that need extracting. Skin may turn pink. This is a normal side effect. Perform extractions, then rinse any residual scaling fluid off skin. Then apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to affected areas.
8.
Microcurrent (Steps 8 – 9 will take approximately 13 minutes) Apply 6-10 drops of the prescribed Dermalogica Complex followed by Colloidal Masque Base to the client’s face and neck with a fan brush. Note: It must be a non-setting masque such as a gel or cream. Next, layer NuFACE Gel Primer or the 24K Gold Gel Primer over top. Follow instructions for using NuFACE Trinity Facial Trainer and ELE attachments. a. Aging – AGE Smart® Complex b. Sensitive skin – UltraCalmingTM Complex c. Oily / acneic skin – MediBac Clearing® Complex 20
9.
Remove any excess product from the skin with a steam towel customized. (1 minute)
10.
Toner (1 minute) Multi-Active Toner (spritz over the entire face and neck evenly)
11.
Moisturizers (1 minute) Active Moist (use a dime size amount and apply to face and neck)
12.
Solar Defense (1 minute) Solar Defense Booster SPF50 (can mix a dime size amount into Active Moist for daylight protection)
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
21
dermalogica detox facial with NuFACE 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (1 minutes add steam Clearing Skin Wash (Ideal for oily, acne) Use a dime size amount. Add water and foam up cleanser. Or use Special Cleansing Gel (Ideal for normal to combination) Use a dime size amount. Add water and foam up cleanser.
5.
Face Mapping® skin analysis (3 min) - Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping® skin analysis. Ensure the client is not contraindicated to microcurrent procedure.
6.
Exfoliate (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal) - Daily Microfoliant - (normal to sensitive) ½ tsp. mixed with ½ tsp. of water. Foam in hands, or use a small bowl and fan masque brush to foam. Add 1 pump of Exfoliant Accelerator 35 and mix. Remove with sponges or warm steam towel. Or - Skin Exfoliant System - (oily, acne) 1 scoop of part A enzymatic base with 1 teaspoon of Part B Acid Activator. Mix to a smooth creamy paste. Add 3 pumps of Exfoliant Accelerator 35 and mix. Apply to the face (avoiding the eyes) and leave on 10 minutes. Steam can be used if strong sensations are felt. Remove with warm steam towel.
7.
Extractions (12 minutes: Scaling Fluid 7 minutes, extractions 5 minutes) Scaling Fluid Dispense quarter of a teaspoon amount into a small dish and foam with a dry fan brush. Apply under steam for 10 minutes prior to extractions only on areas that need extracting. Skin may turn pink. This is a normal side effect. Perform extractions, then rinse any residual Scaling Fluid off skin. Then apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to affected areas.
8.
Masque (7 minutes total) Apply Sebum Clearing Masque to face and neck. Leave on for 7 minutes. Remove masque with a steam towel.
9.
Microcurrent (Steps 9 – 10 will take approximately 11 minutes) Apply 6-10 drops of the prescribed Dermalogica Complex followed by Colloidal Masque Base to the client’s face and neck with a fan brush. Note: It must be a non-setting masque such as a gel or cream. Next, layer NuFACE Gel Primer or the 24K Gold Gel Primer over top. Follow instructions for using NuFACE Trinity Facial Trainer and ELE attachments. 22
a. b. c.
Aging – AGE Smart® Complex Sensitive skin – UltraCalming™ Complex Oily / acneic skin – MediBac Clearing® Complex
10.
Remove any excess product from the skin with a steam towel. (1 minute)
11.
Complex and Toner (1 minute) Medibac Clearing® Complex – apply 6-10 drops to the entire face focusing on areas of breakouts and oily skin. Spritz Multi-Active Toner over the entire face and neck evenly.
12.
Moisturize (1 minute) Active Moist (normal to oily) Apply a dime size amount and apply to face and neck. Skin Smoothing Cream (normal to dry) Apply a dime size amount and apply to face and neck. Note: a dime size amount Solar Defense Booster SPF50 can mixed into Active Moist or Skin Smoothing Cream for daylight protection.
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
23
dermalogica sensitive facial w/NuFACE 1.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lip Cleanse (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (3 minutes) add steam if the client is not extremely irritated. UltraCalmingTM Cleanser (use a dime size amount. Add water and emulsify)
5.
Face Mapping® skin analysis (5 minutes) - explain your finding to client while completing the Face Mapping® skin analysis. Ensure the client is not contraindicated to microcurrent procedure.
6.
Exfoliate (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal) Daily Microfoliant® - normal to sensitive (½ tsp. mixed with ½ tsp. of water. Foam in hands, or use a small bowl and fan masque brush to foam. Remove with sponges or warm steam towel.)
7.
Masque (10 minutes) UltraCalmingTM Complex - apply 6-10 drops to face and neck and perform a pressure point massage. Clinical Colloidal Oatmeal Masque (mix 1 scoop with warm water to form a smooth consistency and apply to the skin with a fan masque brush. Steam is needed for this treatment to keep the masque moist. Ensure steam is kept at a far enough distance to not cause too much heat on the skin). Remove with a warm steam towel.
8.
Microcurrent (Steps 8 – 9 will take approximately 13 minutes) Apply 6-10 drops of the prescribed Dermalogica Complex followed by a generous Colloidal Masque Base to the client’s face and neck with a fan brush. Note: It must be a non-setting masque such as a gel or cream. Next, layer NuFACE Gel Primer or the 24K Gold Gel Primer over top. Follow instructions for using NuFACE Trinity Facial Trainer and ELE attachments. a. b. c.
Aging – AGE Smart® Complex Sensitive skin – UltraCalmingTM Complex Oily / acneic skin – MediBac Clearing® Complex
9.
Remove any excess product from the skin with a steam towel. (2 minutes)
10.
Toner (1 minute) UltraCalmingTM Mist (spritz over the entire face and neck evenly).
11.
Solar Defense (1 minute) Solar Defense Booster SPF50 (can mix a dime size amount into Active Moist or Skin Smoothing Cream if more hydration is needed).
12.
Moisturize (1 minute) Barrier Repair apply a dime size amount first to face and neck.
14.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
24
dermalogica rejuvenating facial w/NuFACE 1.
Face Mapping® skin analysis consultation card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second cleanse (1 minute) add steam. Use a dime size amount of Skin Resurfacing Cleanser. Add water and emulsify.
5.
Face Mapping® skin analysis (3 minutes). Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping skin analysis. Ensure the client is not contraindicated to microcurrent procedure.
6.
Exfoliate and apply steam (10 minutes total for exfoliation and removal). Apply one tube of MultiVitamin Power Exfoliant to face and neck. (This is an excellent option for brightening and resurfacing. 3 minutes for normal skin and up to 7 minutes for coarse skin. Steam will intensify exfoliation effects, so use steam for those with a higher tolerance.) Remove excess with damp esthetic wipes or sponges then perform condensed double cleanse beginning with PreCleanse followed by Special Cleansing Gel. a. Option: upgrade by using Daily Superfoliant instead of MultiVitamin Power Exfoliant.
7.
Extractions Optional: (10 minutes total: Scaling Fluid for 5 minutes, extractions 5 minutes). Dispense quarter of a teaspoon amount into a small dish and foam with a dry fan brush. Apply only to areas to be extracted. Steam for 5 minutes. Skin may turn pink, which is a normal side effect. Blot excess Scaling Fluid with dry tissue prior to performing extractions. After extractions, rinse away any remaining Scaling Fluid. Apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to extracted areas.
8.
Pressure Point Massage if time permits (6 minutes). Apply 6-10 drops of AGE Smart® Complex to face and neck and perform Pressure Point Massage on face.
9.
Microcurrent (Steps 9 – 10 will take approximately 13 minutes) Apply Colloidal Masque Base to the client’s face and neck with a fan brush. Note: It must be a non-setting masque such as a gel or cream. Next, layer NuFACE Gel Primer or the 24K Gold Gel Primer over top. Follow instructions for using Facial Trainer and ELE attachments.
25
a. b. c.
Aging – AGE Smart® Complex Sensitive skin – UltraCalming™ Complex Oily / acneic skin – MediBac Clearing® Complex
10.
Remove any excess product from the skin with a steam towel. (1 minute)
11.
Tone by spritzing with Antioxidant HydraMist. (1 minute)
12.
Eye Treatment – Apply a generous amount of MultiVitamin Power Firm around the eye and lip area. (1 minute)
13.
Moisturize – Apply a dime sized amount of Dynamic Skin Recovery SPF50 to the face, and neck or Skin Smoothing Cream if it is after daylight hours. You may also layer SkinPerfect Primer SFP30 over chosen moisturizer. (2 minutes)
14.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
26
dermalogica’s pressure point massage (each step 1 time for 5 min massage) (repeat ±6 times each) Entire massage should take approximately 15 minutes. Rest fingers just above the ears and place the thumbs in a ‘V’ formation between the brows. Apply pressure over the frontal vertical lines and move up towards the hairline using pressure directed down towards the nose.
Using alternating thumb movements perform thumb sliding over frontal vertical lines toward the hairline.
Divide forehead into 3 horizontal sections, brow, middle and hairline. Position thumbs between the brows, press, release and glide from center towards the temples along the brows and slide down in front of the ears. Follow in a similar pattern over the middle and then hairline to include the entire forehead.
Begin at the center of forehead using the fleshy part of the thumb base (palmar pad), slide over the forehead to the ears.
27
Rest thumbs in a ‘V’ position over inner brow (between brows). Use cushioned middle finger above cheekbone from nose to temples. Use pressure, release and glide movements. Then work below the cheekbone from nasal fold, draining across to the earlobes.
Clasp fingers at center of jaw line, drain the jaw line and stroke back to the ears and work the ears.
Repeat steps 4 & 6. Drain the jaw and forehead one after the other alternating the movements.
Make as if to “scoop” the jaw, avoiding the front of the throat, slide-down the neck to the clavicle. Separate fingers at clavicle (index and middle fingers) and drain to the shoulders.
28
Press down on the front of the shoulders towards the bed (3X). Then pivot and press with the heel of the hand at the top of the shoulders towards the feet (3X).
Slide up the back of the shoulders into the occipital condyles or base of the occipital ridge. Work the following points along the occipital ride by pumping and pressing each point. Points 1 & 5 are directly behind the ear, points 2 & 4 are towards the center and point 3 is directly in the center. Perform 6 circular rotation at each point with middle finger.
Cradle movement is optional for neck. Place forearms on the head of the bed and carefully bring the head to rest on both forearms with the hands between the shoulder blades. Gently move the head slowly from side to side (2X) to release tension.
Optional:
Work neck reflex on feet if client’s neck is stiff or unable to be worked on.
29
micrdermabrasion with NuFACE (50 minutes) 2.
Face Mapping® skin analysis Consultation Card
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
14.
Second Cleanse (1 minute) ADD STEAM Dispense a dime size amount of Special Cleansing Gel. Add water and foam up cleanser.
15.
Face Mapping® skin analysis (3 minutes) – (optional: dispense 2 pumps of Daily Resurfacer to degrease the skin). Perform Face Mapping®, explaining your findings. Look for areas of dehydration and areas of concern.
16.
Exfoliate – (15 minutes total) perform microdermabrasion per manufacturer’s recommendations.
17.
Thoroughly remove any leftover residue with a warm steam towel customized with the appropriate Botanical mixer. A cleanse off with PreCleanse and/or Special Cleansing Gel may be used if needed. (2 minutes)
18.
Extractions (10 minutes) Perform extractions, cautioning if sensitivity is present. Then apply 2 pumps of Post Extraction Solution to a dry piece of cotton and only apply to areas extractions were performed.
19.
Spritz with UltraCalmingTM Mist to calm skin post procedure. (1 minute)
20.
Microcurrent approximately 13 minutes – Apply Colloidal Masque Base to the client’s face and neck with a fan brush. Note: It must be a non-setting masque such as a gel or cream. Next, layer NuFACE Gel Primer or the 24K Gold Gel Primer over top. Follow instructions for using Facial Trainer and ELE attachments.
21.
Spritz with UltraCalmingTM Mist to calm skin post microdermabrasion procedure. (1 minute)
22.
Apply MultiVitamin Power Firm to eye and lip area. (1 minute)
23.
Moisturize (1 minute) (Optional) Apply UltraCalmingTM Serum Concentrate to reduce irritation or any redness. Apply the appropriate Dermalogica Moisturizer and follow with Barrier Repair. Layer on Solar Defense SPF50 to protect the skin if daytime treatment. Skin Perfect Primer SPF30 is also an option.
24.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation, under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild
30
dermalogica protocols for LED treatments workbook
®
Text copyright © by Dermalogica . No part of this text may be reproduced in any way without written permission ® from Dermalogica . 030917 31
contraindications: light emitting diode (led) light therapy Open wounds Sunburn Recent radiation therapy Cancerous lesions or recent Injections in the treatment areas Recent Lasik or eye surgery Essential oils or perfumes on the area to be treated Pacemaker or defibulator Avoid direct use over the thyroid area if there has been any thyroid diagnosis or problem When in doubt, refer client to confirm treatment eligibility with health care provider before going forward
• • • • • • • • • •
led treatment chart Use this chart as a guide when administering treatment with the hand-held LED device. The LED device should be hovered over each section for 30 seconds. It is designed to administer 6 thirty second spot treatments. Do not press the device onto the skin.
directions for use: Follow the chart as a guide for each section to treat. The LED device should be hovered over each section for 30 seconds. It is designed to administer 6 thirty second spot treatments. Note: Do not make contact with the skin. a.
Start in section 1 by working upward and outward from the center chin toward the lower ear.
b.
Repeat in section 2.
c.
Section 3 on the cheek area, work upward and outward toward the middle ear area. Still in section 3 position the device beneath the eye area (do not pass the periorbital bone). Work upward and outward toward the temple.
d.
Repeat in section 4.
e.
Section 5 hover the device over the center of the forehead and work horizontally toward the hairline.
f.
Repeat in section 6.
Important: when using any professional exfoliation, under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be mild.
32
rejuvenating facial with red light led skin phototherapy treatment 1.
Review Face Mapping® skin analysis consultation card that your client has completed and ask any additional pertinent questions.
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
3.
Second cleanse (3 minutes) add steam. Use a dime size amount of Skin Resurfacing Cleanser. Add water and emulsify.
4.
Face Mapping® skin analysis (3 minutes) Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping® skin analysis. Ensure the client is not contraindicated to LED treatment.
5.
Exfoliate and apply steam (10 minutes total for exfoliation and removal). Apply one tube of MultiVitamin Power Exfoliant to face and neck. (This is an excellent option for brightening and resurfacing. 3 minutes for normal skin and up to 7 minutes for coarse skin. Steam will intensify exfoliation effects, so use steam for those with a higher tolerance.) Remove excess with damp esthetic wipes or sponges then perform condensed double cleanse beginning with PreCleanse followed by Special Cleansing Gel.
6.
Extractions: (10 minutes total: Scaling Fluid for 5 min, extractions 5 minutes). Dispense quarter of a teaspoon amount into a small dish and foam with a dry fan brush. Apply only to areas to be extracted. Steam for 5 minutes. Skin may turn pink, which is a normal side effect. Blot excess Scaling Fluid with dry tissue prior to performing extractions. After extractions, rinse away any remaining Scaling Fluid. Apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to extracted areas.
7.
Perform freestyle Massage (5 minutes). Massage face, neck and shoulders with recommended massage cream or Dermalogica’s Massage Cream. Remove with warm steam towel.
8.
LED (Steps 8– 9 will take approximately 13 minutes). Apply a thin layer of Colloidal Masque Base to the client’s face and neck with a fan brush. Place protective goggles over the guest’s eyes and turn on the hand-held LED device and hover the LED hand-held device about ½” from the skin. Follow instructions for using the LED device.
9.
Turn off the device and remove masque from the skin with a steam towel. (1 minute)
10.
Apply 6-10 drops of AGE Smart® Complex to face and neck. Spritz with Antioxidant HydraMist. (1 minute)
11.
Eye Treatment. Apply a generous amount of MultiVitamin Power Firm around the eye and lip area. (1 minute)
12.
Moisturize by applying a dime sized amount of Dynamic Skin Recovery SPF50 to the face, and neck or Skin Smoothing Cream if it is after daylight hours. You may also layer SkinPerfect Primer SFP30 over chosen moisturizer. (1 minute)
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
33
sensitive skin facial protocol with red light or blue light led skin phototherapy treatment 1.
Review Face Mapping® skin analysis consultation card that your client has completed and ask any additional pertinent questions.
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (2 minutes) add steam if the client is not extremely irritated. UltraCalmingTM Cleanser (use a dime size amount. Add water and emulsify)
5.
Face Mapping® skin analysis (5 minutes) - explain your finding to client while completing the Face Mapping® skin analysis. Ensure the client is not contraindicated to LED treatment.
6.
Exfoliate (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal) Daily Superfoliant® - dispense ½ tsp. and mix with ½ tsp. of water in a small bowl. Apply to face using a fan brush. With fingertips, lightly massage onto skin using small circular motion. Remove with sponges or warm steam towel.
7.
Masque (12 minutes, 2 minutes for application and removal, 10 minutes rest time) UltraCalmingTM Complex - apply 6-10 drops to face and neck and perform a pressure point massage. Clinical Colloidal Oatmeal Masque (mix 1 scoop with warm water to form a smooth consistency and apply to the skin with a fan brush. Steam is needed for this treatment to keep the masque moist. Ensure steam is kept at a far enough distance to not cause too much heat on the skin). Remove with a warm steam towel.
8.
LED (Steps 8 – 9 will take approximately 13 minutes) Apply a thin layer of Colloidal Masque Base to the client’s face and neck with a fan brush. Place protective goggles over the guest’s eyes and turn on the hand-held LED device and hover the LED hand-held device about ½” from the skin. Follow instructions for using the LED device.
9.
Remove any excess product from the skin with a steam towel. (1 minute)
10.
Apply 6-10 drops of AGE Smart® Complex to face and neck. Spritz UltraCalmingTM Mist over the entire face and neck evenly. (1 minute)
11.
To moisturize apply a dime size amount of Active Moist (normal to oily) or Skin Smoothing Cream (normal to dry) to face and neck. Note: a dime size amount Solar Defense Booster SPF50 can be mixed into Active Moist or Skin Smoothing Cream for daylight protection. (1 minute)
12.
Protect by applying a dime size amount of Barrier Repair to face and neck. (1 minute)
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
34
detox facial protocol with blue light led skin phototherapy treatment 1.
Review Face Mapping® skin analysis consultation card that your client has completed and ask any additional pertinent questions.
2.
Cleanse Eyes and Lips (1 minute) Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3.
First Cleanse (1 minute) Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4.
Second Cleanse (1 minute) add steam Clearing Skin Wash (Ideal for oily, acne) Use a dime size amount. Add water and foam up cleanser. Or - Special Cleansing Gel (Ideal for normal to combination) Use a dime size amount. Add water and foam up cleanser.
5.
Face Mapping® skin analysis (3 minutes) - Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin. Explain your findings to client while completing the Face Mapping® skin analysis. Ensure the client is not contraindicated to LED treatment.
6.
Exfoliate (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal) - Daily SuperfoliantTM - (normal to aging skin) dispense ½ tsp. and mix with ½ tsp. of water in a small bowl. Apply to face using a fan brush. With finger tips lightly massage onto skin using small circular motion. Or - Skin Exfoliant System - (oily, acne) 1 scoop of Part A Enzymatic Base with 1 teaspoon of Part B Acid Activator. Mix to a smooth creamy paste. Add 3 pumps of Exfoliant Accelerator 35 and mix. Apply to the face (avoiding the eyes) and leave on 10 minutes. Steam can be used if strong sensations are felt. Remove with warm steam towel.
7.
Extractions (12 minutes total: Scaling Fluid 7 minutes, extractions 5 minutes) Dispense quarter of a teaspoon amount of Scaling Fluid into a small dish and foam with a dry fan brush. Apply under steam for 10 min prior to extractions only on areas that need extracting. Skin may turn pink. This is a normal side effect. Perform extractions, then rinse any residual Scaling Fluid off skin. Then apply 2 pumps of Post Extraction Solution to a dry piece of cotton and apply to affected areas.
8.
Masque (7 minutes total) Sebum Clearing Masque apply to face and neck. Leave on for 7 minutes. Remove masque with a steam towel.
9.
LED (Steps 9 – 10 will take approximately 10 minutes) Apply a thin layer of Colloidal Masque Base to the client’s face and neck with a fan brush. Place protective goggles over the guest’s eyes and turn on the hand-held LED device and hover the LED hand-held device about ½” from the skin. Follow instructions for using the LED device. 35
10.
Turn off the device and remove masque from the skin with a steam towel. (1 minute)
11.
Apply 6-10 drops of Medibac Clearing® Complex to the entire face focusing on areas of breakouts and oily skin. Then spritz Multi-Active Toner over the entire face and neck evenly. (1 minute)
12.
To moisturize, apply a dime size amount of Active Moist (normal to oily). Or Skin Smoothing Cream (normal to dry) to face and neck. Note: a dime size amount Solar Defense Booster SPF50 can mixed into Active Moist or Skin Smoothing Cream for daylight protection. (1 minute)
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
36
NuFace with LED (50 mintues) 1. Review the Face Mapping® skin analysis Consultation Card, and ensure there are no contraindications to the treatment specifically if you are using electrical modalities.
2. Cleanse eyes and Lips (1 minute)
Apply a pea size amount of PreCleanse to 3 pieces of damp cotton and remove eye and lip make up. Rinse with sponges.
3. First Cleanse (1 minute)
Dispense PreCleanse into dry hands. Massage over dry face and eyes to dissolve surface oils. Wet hands, and continue cleansing to create a light, milky emulsion. Remove with sponges or warm steam towel.
4. Second cleanse (1 minute – add steam)
Use the appropriate Dermalogica Cleanser. Remove sponges, esthetic wipes or steam towel.
5. Face Mapping® skin analysis (3 minutes) - Optional: dispense 2 pumps of Daily Resurfacer to degrease the skin.
Explain your findings to client while completing the Face Mapping® skin analysis. Ensure the client is not contraindicated to LED treatment.
6. Exfoliate (13 minutes, 10 min on skin, 3 min for application and removal) Apply the prescribed Dermalogica
Professional Exfoliant, and follow the specific product directions. Remove with sponges, esthetic wipes or steam towel. Options:
For dehydrated skin apply Daily Microfoliant® customize with 1 pump of Exfoliant Accelerator 35 For acneic skin apply Skin Exfoliant System, customize with1 pump of Exfoliant Accelerator 35 For pigmentation, sun damaged or aging skin apply either Exfoliant Accelerator 35 alone or MultiVitamin Power Exfoliant alone or customized with 1 pump of Exfoliant Accelerator 35
7. Microcurrent (Steps 7 – 8 will take approximately 13 minutes) Apply 6-10 drops of the prescribed Dermalogica
Complex followed by Colloidal Masque Base to the client’s face and neck with a fan brush. Note: It must be a nonsetting masque such as a gel or cream. Next, layer NuFACE Gel Primer or the 24K Gold Gel Primer over top. Follow instructions for using NuFACE Trinity Facial Trainer and ELE attachments. d. e. f.
Aging – AGE Smart® Complex Sensitive skin – UltraCalmingTM Complex Oily / acneic skin – MediBac Clearing® Complex
8. LED (Steps 8 – 9 will take approximately 10 minutes) place protective goggles over the guest’s eyes and turn on the
hand-held LED device and hover the LED hand-held device about ½” from the skin. Follow instructions for using the LED device.
9. When finished, turn off the device and remove masque from the skin with a steam towel. (2 minute) 10.
Spritz with UltraCalmingTM Mist to calm skin post microdermabrasion procedure. (2 minutes)
11.
Apply MultiVitamin Power Firm to eye and lip area. (2 minutes)
12.
Moisturize (2 minute) (Optional) Apply UltraCalmingTM Serum Concentrate to reduce irritation or any redness. Apply the appropriate Dermalogica Moisturizer and follow with Barrier Repair. Layer on Solar Defense SPF50 to protect the skin if daytime treatment. Skin Perfect Primer SPF30 is also an option.
13.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
37
chest and back chart application for treatment with LED Use this chart as a guide when administering treatment with the hand-held LED device. The LED device should be hovered over each section for 30 seconds. It is designed to administer 6 thirty second spot treatments. Do not press the device onto the skin.
38
chest protocol with red light led skin phototherapy 1.
Review Face Mapping® skin analysis consultation card that your client has completed and ask any additional pertinent questions.
2.
Perform the Dermalogica Double Cleanse that begins with PreCleanse for the first cleanse, then use Skin Resurfacing Cleanser or the appropriate cleanser for client on the second cleanse under steam. Remove all traces of cleanser with steam towel. (5 minutes)
3.
Perform Face Mapping® skin analysis. Degrease the skin by dispensing 2 pumps of Daily Resurfacer on to a sponge applicator and wipe over the décolleté. (4 minutes)
4.
Twist open one applicator tube of MultiVitamin Power Exfoliant, apply and massage onto décolleté using circular motions. For coarse, sun damaged skin, use steam with MultiVitamin Power Exfoliant for 4-7 minutes. For more sensitive skin, steam should be avoided and time may be reduced. One pump of Exfoliant Accelerator 35 may be added for increased activity. When exfoliation is complete, wipe away excess exfoliant with dry 4x4 gauze. (10 minutes)
5.
Perform the Dermalogica Double Cleanse and remove all traces of the exfoliant with steam towel. (5 minutes)
6.
Perform freestyle Massage (10 minutes). Massage neck, shoulders, décolleté with recommended massage cream or Dermalogica’s Massage Cream. Remove with warm steam towel.
7.
(Steps 7– 8 will take approximately 10 minutes). Apply Colloidal Masque Base to the client’s décolleté with a fan brush.
8.
Turn on the hand-held LED device and hover the LED hand-held device about ½” from the skin. Do not make contact with the skin.
Directions of use: Follow the décolleté chart as a guide for each section to treat. The LED device should be hovered over each section for 30 seconds. It is designed to administer 6 thirty second spot treatments. •
Start in section 1, hovering the LED device over each section until all section has been treated.
9.
Turn off the device and remove masque from the skin with a steam towel. (2 minutes)
10.
Apply 6-10 drops of AGE Smart® Complex to décolleté. Spritz with Antioxidant HydraMist. (1 min)
11.
Moisturize by applying a dime sized amount of Dynamic Skin Recovery SPF50 to the décolleté (directly over toner) or Skin Smoothing Cream if it is after daylight hours. Optional: Barrier Repair may be layered on top. (3 minutes)
12.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
39
back facial protocol with blue light led skin phototherapy 1.
Review Face Mapping® skin analysis consultation card that your client has completed and ask any additional pertinent questions.
2.
Perform the Dermalogica Double Cleanse that begins with PreCleanse for the first cleanse, then use Clearing Skin Wash or the appropriate cleanser for client on the second cleanse under steam. Remove all traces of cleanser with steam towel. (5 minutes)
3.
Perform Face Mapping skin analysis. Degrease the skin by dispensing 2 pumps of Daily Resurfacer on to a sponge applicator and wipe over the décolleté. (3 minutes)
4.
Exfoliate by mixing 1 scoop Part A of Skin Exfoliant System and ¾ teaspoon Scaling Fluid. Apply all over back area under steam. Remove with warm steam towel. (12 minutes total: 10 minutes for exfoliation, 2 minutes for removal)
5.
Perform extractions, then wipe with Post Extraction Solution over the zones where extractions were performed. (5 minutes)
6.
Using a fan brush, apply Sebum Clearing Masque to the back. Remove masque with a steam towel. (12 minutes total: 10 minutes for masque, 2 minutes to remove)
7.
(Steps 7– 8 will take approximately 10 minutes). Apply Colloidal Masque Base to the client’s back with a fan brush.
8.
Turn on the hand-held LED device and hover the LED hand-held device about ½” from the skin. Do not make contact with the skin.
®
Directions of use: Follow the back chart as a guide for each section to treat. The LED device should be hovered over each section for 30 seconds. It is designed to administer 6 thirty second spot treatments. •
Start in section 1, hovering the LED device over each section until all section has been treated.
9.
Turn off the device and remove masque from the skin with a steam towel. (2 minutes)
10.
Apply 6-10 drops of the appropriate Dermalogica Complex to back area. Spritz with a generous amount of MultiActive Toner. (1 minute)
11.
Moisturize with Active Moist (normal to oily) or Skin Smoothing Cream (normal to dry). (2 minutes)
12.
Follow up with the Face Mapping® skin analysis Prescription Sheet and present recommendations to address your guest’s needs.
Important: when using any professional exfoliation under no circumstances should you leave your client unattended in the treatment room at any time. Even if the exfoliant you have chosen would be considered mild.
40
