Transcript
1200 Maximum Peak Lumens Multi-Control Protocol CTM 109 CTM 112 CTM 119
LED Color Tuning Module
CTM 109
CTM 112
CTM 119
CTM 119NR
Description araya®5 Color Tuning Modules mix five colors of LEDs to deliver tunable and dimmable white light at 90+ CRI and color consistency of <2 MacAdam ellipse across a tuning range of 1650 - 4000K. Light can be dimmed from 100 - 1% while maintaining constant CCT. Gradients of saturated colors from 1 - 100% can be added to color points within the tuning range. araya®5 modules integrate the driver electronics for precise control of current and PWM inputs and LED light output while tuning and dimming. On board closed loop thermal feedback compensates each color channel for thermally induced variations in optical output due to tuning, dimming or ambient temperatures. On board closed loop optical feedback measures the lumen depreciation of each channel and re-balances the color model to ensure color consistency over the 50,000 hour life of the module. An in-line manufacturing process captures the spectral characteristics of each LED under multiple conditions, generating a unique color model for each color tuning module. araya®5 Color Tuning Modules are compatible with traditional 0 - 10V wired controls, and features on board Bluetooth and DMX RDM. For simple deployment, SceneSet® allows up to five scenes to be pre-programmed into the module during production and recalled at the venue using a 0 - 10V recommended dimmer. Commissioning of the module, re-programming of Sceneset®, and configuration of DMX RDM channels is done via the wireless araya®5 Tunable Color 2.0 iOS app that connects to the embedded radio. The CTM One series features light emitting surfaces (LES) of 9, 12 and 22 mm, and a tuning range of 1650 - 4000K.
Key Features • Tunable range: 1650 - 4000K • Dimmable from 100% - 1% at constant CCT • Color gamut control: gradients of saturated colors
• Compatible with 0 - 10V wired controls • Embedded Bluetooth radio • SceneSet® enables up to five scenes to be
from 1 - 100% can be added to color points • Integrated driver electronics • On board thermal and optical feedback for color
consistency of <2 MacAdam ellipse over 50,000 hour life • In-line spectral capture creates unique color model
for each module, resulting in consistent CRI and CCT across all modules • On board thermal turndown
preprogrammed and recalled using a 0 - 10V recommended dimmer • Commissioning and DMX RDM channel configuration via wireless araya®5 Tunable Color 2.0 iOS app • Three light emitting surfaces (LES): 9, 12 and 22 mm • Zhaga compliant footprint and front heat sink mounting • Provisions for reflector mounting
araya5 Tunable Color 2.0 iOS App
Photometrics and Ordering Codes CTM 109 Tunable Range
Specifications*
1650 - 4000K
Wattage
Peak Lumens
CTM 112
Ordering Code
CTM 119 / 119NR
Peak Ordering Code Lumens
Peak Lumens
Ordering Code (CTM 119)
Ordering Code (CTM 119NR)
20W
875
45.021.002.01
1000
45.021.003.01
1200
45.021.004.01
45.021.005.01
12.5W
600
45.021.006.01
650
45.021.006.02
800
45.021.006.03
45.021.006.04
CRI (Ra) Across Tuning Range
>90
Dimming
100% to 1% in increments of 1% at constant CCT
Nominal Color Consistency
<2 MacAdam ellipse (±0.002 Duv from ANSI C78.377-2008 curve)
Color Consistency Over Life
Calibration maintains original color points over life
Lumen Maintenance
L70 (70% of initial lumens) at 50,000 hours
* Lumen and wattage range is within +/- 10% of the nominal value. Peak efficacy is not necessarily at typical peak lumens.
Lumenetix Inc.
•
4742 Scotts Valley Dr.
•
Scotts Valley, CA 95066
877.805.7284
Lumenetix, araya5, Dynamic Dimming and SceneSet are registered trademarks of Lumenetix, Inc. © Lumenetix, Inc. 2017.
Revised 2.22.17 | Specifications subject to change without notice
•
www.lumenetix.com
•
[email protected]
UL Recognized Component Dry or Damp Locations
ULRRecognized UL ecognized Component Component Dry or Damp Class 2 Input Dry or DLocations amp Locations
Class 2 Input
Class 2
Designed in California, USA
Designed in California, Assembled in USA USA Assembled in USA
Input
1200 Maximum Peak Lumens Multi-Control Protocol CTM 109 CTM 112 CTM 119
LED Color Tuning Module
Electrical Specifications Input Voltage
12V DC
Nominal Power Input
12.5 and 20 Watts
Nominal Current Input
12.5W: 0.96A; 20W: 1.7A
Power Supply Classification
Class 2
Power Connector
Molex 874380243 (requires Molex 874390200)
Control Connector
Molex 874370543 (requires Molex 874390700)
Control Options1
0 - 10V, DMX RDM
CCT and Dimming Control Connections
Connector harness, 24 gauge leads
1. DMX RDM channel configuration is done via optional wireless Tunable Color 2.0 iOS app.
Mechanical Specifications Diameter: Height:
Dimensions
1.97 inches (50 mm) 0.67 inches (17 mm); CTM 119NR: 0.84 inches (21.44 mm) 9.5, 12.75 and 22 mm
Light Emitting Surface
8
Weight
0.12 pounds (0.06kg)
Heat Sink Attachment
Front mount, M2.5 or 4-40 Screws
Max Case Temperature
≤80°C
CTM 6119, CTM 112, CTM 109 5
7
4
2
3
1
8
5X
D
2X
5
6
5X
35 B.C. 1.38
50 1.97
CTM 119NR – Raised Face
7
50 1.97
3.40 THRU .13
4
35 B.C. 1.38 2X 3.40 THRU .13 USE M3X0.5 SCREW
D
D
3X
1.30 4 .05 USE M1.8 X4 SCREW (REFLECTOR ATTACHMENT) C
Model
CTM1-19 LES Diameter
37°
53°
22mm 12.75mm
CTM1-12
CTM 109
67°
C
EMITTING MODEL LIGHT SURFACE DIA
C
CTM1-09 9.5 mm (0.37 inches)9mm
CTM 112
12.75 mm (0.50 inches)
CTM 119
22 mm (0.87 inches)
.866". .502" .354" 37°
67°
53°
B
B B
17 .67
21.44 .84
A
UNLESS OTHERWISE SPECIFIED:
NAME
DATE
DIMENSIONS ARE IN MILLIMETERS DRAWN TOLERANCES: CHECKED ANGULAR: MACH 0.5 ONE PLACE DECIMAL 0.5 ENG APPR. TWO PLACE DECIMAL 0.15
A.N.
05/13/13
A
INTERPRET GEOMETRIC TOLERANCING PER: ASME Y14.5
PROPRIETARY AND CONFIDENTIAL
8
7
6
MATERIAL
Q.A. COMMENTS:
SIZE DWG. NO.
SEE NOTES
APPLICATION
1
2
3
1
Lumenetix Inc.
4742 Scotts Valley Dr.
•
Scotts Valley, CA 95066
877.805.7284
Lumenetix, araya5, Dynamic Dimming and SceneSet are registered trademarks of Lumenetix, Inc. © Lumenetix, Inc. 2017.
Revised 2.22.17 | Specifications subject to change without notice
6
7
8
•
•
ULRRecognized UL ecognized Component Component Dry or Damp Class 2 Input Dry or DLocations amp Locations
Class 2 Input
MATERIAL
SE
USED ON
NEXT ASSY APPLICATION
4
5
www.lumenetix.com
•
[email protected]
UL Recognized Component Dry or Damp Locations
INTERPRET G TOLERANC
PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LUMENETIX. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LUMENETIX IS PROHIBITED.
SHEET 2 OF 2
SCALE: 1:1 WEIGHT:
DO NOT SCALE DRAWING
4
5
REV
B
FINISH
USED ON
NEXT ASSY
UNLESS O
DIMENSIO TOLERANC ANGULAR ONE PLAC TWO PLAC
A
CTM-12V, 19 DIA, FINAL ASSEMBLY
MFG APPR.
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF LUMENETIX. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF LUMENETIX IS PROHIBITED.
Lumenetix TITLE:
Class 2
Designed in California, USA
Designed in California, Assembled in USA USA Assembled in USA
Input
FINISH
DO NO
